Chemical Analysis of Different Parts of Date Palm (Phoenix dactylifera L.) Using Ultimate, Proximate and Thermo-Gravimetric Techniques for Energy Production
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
The objective of the study was to analyze chemical structure of date palm (Phoenix dactylifera L.) by employing ultimate, proximate and thermo-gravimetric techniques. Samples from different anatomical parts of date palm, namely trunk, frond base, frond midrib, leaflets, coir, fruit stem, date stone, and fruit empty bunches were considered for the experiments. Based on the findings in this work palm leaflet samples gave the highest amount of extractives content (32.9%), followed by date palm stone specimens with 31.5%. Cellulose content values of 32.8% and 47.5% were obtained for date palm stone and palm coir samples, respectively. Overall the hemicellulose contents of all samples were relatively similar to those of typical wood or non-wood lignocellulosic materials with the two exceptions of palm coir and palm leaflets. Both palm coir and palm leaflet specimens had 12.6% and 16.1% hemicellulose content. Volatile matter values of 74.3% and 87.5% were determined for leaflets and fruit empty bunch samples. The ash content of the samples ranged from 1.4% for date stone to 15.2% for palm leaflet samples. The thermal decomposition was completed below a temperature of 500 °C with an exception of those samples taken from palm leaflets. Taken together the data indicate that date palm stone and palm coir revealed could be more viable for renewable energy production than the other specimens considered in this work.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy production from biomass (part 1): overview of biomass
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00118-3 · Cited by 4,860 · cited 1×
“The chemical energy of a solid fuel is stored in the forms of volatiles and fixed carbon [33].”
BackgroundCombustion properties of biomass
Jenkins, B. M., Baxter, L. L., Miles, T. R., & Miles, T. R. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00059-3 · Cited by 1,938 · cited 1×
“It is an excellent tool to describe and predict the heating values of a biomass [17,34–39].”
MethodComparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624 · cited 1×
“[59] 49–62 4.”
Characterization of Spanish biomass wastes for energy use
García, R., Pizarro, C., Lavín, A. G., & Bueno, J. L. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.10.004 · Cited by 465 · cited 2×
“It is an excellent tool to describe and predict the heating values of a biomass [17,34–39].”
MethodResultUsman, A. R. A., Abduljabbar, A., Vithanage, M., Ok, Y. S., Ahmad, M., Ahmad, M., Elfaki, J., Abdulazeem, S. S., & Al-Wabel, M. I. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.08.016 · Cited by 354 · cited 1×
“many applications such as lumber [9], particleboard [10–12], pulp and paper [13–15], wood-cement composites [16], wood-plastic composites [17,18], oriented strandboard [19], for the pyrolysis characteristics of the seeds [20], in briquette production [21], and for biochar production [22,23].”
BackgroundRenewable materials to reduce building heat loss: Characterization of date palm wood
Agoudjil, B., Benchabane, A., Boudenne, A., Ibos, L., & Fois, M. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.10.014 · Cited by 341
Predicting heating values of lignocellulosics and carbonaceous materials from proximate analysis
Cordero, T., Marquez, F., Rodriguez-Mirasol, J., & Rodriguez, J. J. (2001) · Fuel · doi:10.1016/s0016-2361(01)00034-5 · Cited by 337 · cited 1×
“In a previous work a simple equation to predict the heating values of three wood species, namely Pinus halepensis, Quercus rotundifolia and Eucaluptus saligna and three lignocellulosic wastes olive seeds, almond shells and wet straw from Southern Spain was established by using proximate analysis [34].”
MethodThermogravimetric Analysis−Fourier Transform Infrared Analysis of Palm Oil Waste Pyrolysis
Yang, H., Yan, R., Chin, T., Liang, D. T., Chen, H., & Zheng, C. (2004) · Energy & Fuels · doi:10.1021/ef030193m · Cited by 325
Telmo, C., Lousada, J., & Moreira, N. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.021 · Cited by 280 · cited 1×
“3% based on the findings of a past work [38].”
BackgroundAbu‐Sharkh, B. F., & Hamid, H. S. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.10.022 · Cited by 226 · cited 1×
“many applications such as lumber [9], particleboard [10–12], pulp and paper [13–15], wood-cement composites [16], wood-plastic composites [17,18], oriented strandboard [19], for the pyrolysis characteristics of the seeds [20], in briquette production [21], and for biochar production [22,23].”
Background
Cited by
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
Date Palm Based Activated Carbon for the Efficient Removal of Organic Dyes from Aqueous Environment
Chowdhury, S., Pan, S., Balasubramanian, R., & Das, P. (2019) · Sustainable Agriculture Reviews · doi:10.1007/978-3-030-11345-2_12 · Cited by 27
Metadata
- Authors
- Nasser, R., Salem, M., Hiziroglu, S., Al-Mefarrej, H., Mohareb, A., Alam, M., & Aref, I.
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2016-05-16
- Volume
- 9
- Issue
- 5
- Pages
- 374
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2408422244
- Cited by
- 166
- References
- 28
- FWCI
- 3.95
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.