The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Forest Inventory with Terrestrial LiDAR: A Comparison of Static and Hand-Held Mobile Laser Scanning
Open accessAbstract
The application of static terrestrial laser scanning (TLS) in forest inventories is becoming more effective. Nevertheless, the occlusion effect is still limiting the processing efficiency to extract forest attributes. The use of a mobile laser scanner (MLS) would reduce this occlusion. In this study, we assessed and compared a hand-held mobile laser scanner (HMLS) with two TLS approaches (single scan: SS, and multi scan: MS) for the estimation of several forest parameters in a wide range of forest types and structures. We found that SS is competitive to extract the ground surface of forest plots, while MS gives the best result to describe the upper part of the canopy. The whole cross-section at 1.3 m height is scanned for 91% of the trees (DBH > 10 cm) with the HMLS leading to the best results for DBH estimates (bias of −0.08 cm and RMSE of 1.11 cm), compared to no fully-scanned trees for SS and 42% fully-scanned trees for MS. Irregularities, such as bark roughness and non-circular cross-section may explain the negative bias encountered for all of the scanning approaches. The success of using MLS in forests will allow for 3D structure acquisition on a larger scale and in a time-efficient manner.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nondestructive estimates of above‐ground biomass using terrestrial laser scanning
Calders, K., Newnham, G., Burt, A., Murphy, S., Raumonen, P., Herold, M., Culvenor, D., Avitabile, V., Disney, M., Armston, J., et al. (2015) · Methods in Ecology and Evolution · doi:10.1111/2041-210x.12301 · Cited by 701
Self-citationRetrieval of forest structural parameters using LiDAR remote sensing
van Leeuwen, M., & Nieuwenhuis, M. (2010) · European Journal of Forest Research · doi:10.1007/s10342-010-0381-4 · Cited by 425
Zebedee: Design of a Spring-Mounted 3-D Range Sensor with Application to Mobile Mapping
Bosse, M., Zlot, R., & Flick, P. (2012) · IEEE Transactions on Robotics · doi:10.1109/tro.2012.2200990 · Cited by 399
A low-cost multi-sensoral mobile mapping system and its feasibility for tree measurements
Jaakkola, A., Hyyppä, J., Kukko, A., Yu, X., Kaartinen, H., Lehtomäki, M., & Lin, Y. (2010) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2010.08.002 · Cited by 339
Terrestrial Laser Scanning for Plot-Scale Forest Measurement
Newnham, G. J., Armston, J. D., Calders, K., Disney, M. I., Lovell, J. L., Schaaf, C. B., Strahler, A. H., & Danson, F. M. (2015) · Current Forestry Reports · doi:10.1007/s40725-015-0025-5 · Cited by 270
Self-citationMultiplatform Mobile Laser Scanning: Usability and Performance
Kukko, A., Kaartinen, H., Hyyppä, J., & Chen, Y. (2012) · Sensors · doi:10.3390/s120911712 · Cited by 214
An architectural model of trees to estimate forest structural attributes using terrestrial LiDAR
Côté, J.-F., Fournier, R. A., & Egli, R. (2011) · Environmental Modelling & Software · doi:10.1016/j.envsoft.2010.12.008 · Cited by 208
Retrieval of forest structural parameters using a ground-based lidar instrument (Echidna®)
Strahler, A. H., Jupp, D. L. B., Woodcock, C. E., Schaaf, C. B., Yao, T., Zhao, F., Yang, X., Lovell, J., Culvenor, D., Newnham, G., et al. (2008) · Canadian Journal of Remote Sensing · doi:10.5589/m08-046 · Cited by 192
Dassot, M., Colin, A., Santenoise, P., et al. (2012) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2012.08.005 · Cited by 169
Assessing Handheld Mobile Laser Scanners for Forest Surveys
Ryding, J., Williams, E., Smith, M., & Eichhorn, M. (2015) · Remote Sensing · doi:10.3390/rs70101095 · Cited by 161
Benchmarking the Performance of Mobile Laser Scanning Systems Using a Permanent Test Field
Kaartinen, H., Hyyppa, J. M., Kukko, A., Jaakkola, A., & Hyyppä, H. (2012) · Sensors · doi:10.3390/s120912814 · Cited by 110
Terrestrial laser scanning to estimate plot-level forest canopy fuel properties
García, M., Danson, F. M., Riaño, D., Chuvieco, E., Ramirez, F. A., & Bandugula, V. (2011) · International Journal of Applied Earth Observation and Geoinformation · doi:10.1016/j.jag.2011.03.006 · Cited by 78
James, M. R., & Quinton, J. N. (2013) · Earth Surface Processes and Landforms · doi:10.1002/esp.3489 · Cited by 75
Cited by
Terrestrial laser scanning in forest ecology: Expanding the horizon
Calders, K., Adams, J., Armston, J., Bartholomeus, H., Bauwens, S., Bentley, L. P., Chave, J., Danson, F. M., Demol, M., Disney, M., et al. (2020) · Remote Sensing of Environment · doi:10.1016/j.rse.2020.112102 · Cited by 530
Self-citationRemote sensing in forestry: current challenges, considerations and directions
Fassnacht, F. E., White, J. C., Wulder, M. A., & Næsset, E. (2024) · Forestry: An International Journal of Forest Research · doi:10.1093/forestry/cpad024 · Cited by 353
Estimation of above‐ground biomass of large tropical trees with terrestrial LiDAR
Gonzalez de Tanago, J., Lau, A., Bartholomeus, H., Herold, M., Avitabile, V., Raumonen, P., Martius, C., Goodman, R. C., Disney, M., Manuri, S., et al. (2018) · Methods in Ecology and Evolution · doi:10.1111/2041-210x.12904 · Cited by 291
Self-citation
Metadata
- Authors
- Bauwens, S., Bartholomeus, H., Calders, K., & Lejeune, P.
- Venue
- Forests
- Publisher
- MDPI AG
- Published
- 2016-06-21
- Volume
- 7
- Issue
- 6
- Pages
- 127
- ISSN
- 1999-4907 (ISSN-L)
- OpenAlex
- W2466494297
- Cited by
- 379
- References
- 13
- FWCI
- 12.27
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.