Optimization of Arthrospira platensis (Spirulina) Growth: From Laboratory Scale to Pilot Scale
Open accessThe DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index; 3 of the 17 sources its claims cite were checked for support.
Abstract
Arthrospira platensis (Spirulina) is the most cultivated microalga worldwide. Improving its cultivation in terms of biomass productivity, quality, or production cost could significantly impact the Spirulina industry. The objectives of this paper were defined as to contribute to this goal. Spirulina biomass productivity was investigated through medium choice. A modified Zarrouk’s medium was selected as it gave higher final dry weights and longer sustained growth than Hiri’s and Jourdan’s media. Then, in order to reduce Spirulina production cost, modified Zarrouk’s medium was rationalized by testing different dilutions. It was found that modified Zarrouk’s medium could be diluted up to five times without impacting the growth rates in a 28-days batch cultivation. Higher dry weights were even observed after 21 days of batch cultivation (1.21 g/L for 20%-modified Zarrouk’s medium in comparison to 0.84 g/L for modified Zarrouk’s medium). Iron uptake was then investigated as one of the major contributors to Spirulina nutritional quality. An increase in iron content was obtained by replacing iron sulfate by iron EDTA at a concentration of 10 mgFe/L (2.11 ± 0.13 mgFe/gbiomass for EDTA-FeNa, 3 H2O at 10 mgFe/L compared to 0.18 ± 0.13 for FeSO4,6H2O at 2 mgFe/L). Impact of light intensity on Spirulina biomass productivity was also investigated in a 2 L Photobioreactor (PBR). Specific growth rates were calculated for Photosynthetically Photon Flux Densities (PPFD) from 85 to 430 µmol/m2/s. At 430 µmol/m2/s, photoinhibition was not observed and the specific growth rate was maximum (0.12/day). Finally, a 40-day cultivation experiment was conducted in a 1000 L PBR giving a maximum daily areal productivity of 58.4 g/m2/day. A techno-economic analysis gave production cost two to 20 times higher for PBR (from 18.71 to 74.29 €/kg) than for open ponds (from 3.86 to 9.59 €/kg) depending on Spirulina productivity.
Overview
CoChat Summary
TL;DR
This study optimized *Arthrospira platensis* (Spirulina) cultivation by comparing media, testing medium dilution, iron sources, light intensity, and a pilot-scale photobioreactor (PBR). Modified Zarrouk’s medium and its dilution improved lab productivity, Fe-EDTA increased biomass iron content, and a 1000 L PBR reached up to 58.4 g/m²/day but at substantially higher production cost than open ponds.
Key findings
- Modified Zarrouk’s medium (ZM) gave higher biomass productivity than modified HM and JM: 91.5 ± 4.0 mg/L/day from day 0 to day 13, versus 80.5 ± 1.6 mg/L/day for HM and 77.9 ± 3.4 mg/L/day for JM.
- Modified ZM could be diluted up to five times (20% ZM) without impacting growth rates in a 28-day batch cultivation; after 21 days, dry weight was 1.21 g/L for 20% ZM versus 0.84 g/L for undiluted ZM. Average daily growth rates from day 0 to day 15 were 0.145/day for 20% ZM and 0.142/day for 50% ZM, versus 0.094/day for 100% ZM.
- Replacing iron sulfate with Fe-EDTA at 10 mgFe/L increased Spirulina iron content to 2.11 ± 0.13 mgFe/g biomass for EDTA-FeNa,3H2O at 10 mgFe/L, compared with 0.18 ± 0.13 mgFe/g for FeSO4,6H2O at 2 mgFe/L; however, 10 mgFe/L slightly inhibited growth after 10 days, while 3 mgFe/L did not significantly impact growth.
- In a 2 L PBR, higher PPFD increased growth from 85 to 430 µmol/m²/s, with a maximum specific growth rate of 0.12/day at 430 µmol/m²/s and no photoinhibition observed at that intensity; a 40-day 1000 L Camargue PBR run reached a maximum daily areal productivity of 58.4 g/m²/day, with averages of 55 mg/L/day and 6.19 g/m²/day from day 5 to 40.
- Techno-economic analysis gave PBR production costs from 18.71 to 74.29 €/kg depending on productivity, versus open ponds from 3.86 to 9.59 €/kg.
Methods
- *Arthrospira platensis* from Paracas, Peru (strain no. 14067) was used, selected for higher growth rates than a Lonar, India strain. Modified ZM, HM, and JM media were compared; all used Hutner’s trace element solution without iron, and Fe-EDTA formulations from Plantin and Akzo Nobel were tested.
- Lab cultures were grown in incubation shakers at 120 RPM, 32 °C, and 11 µmol/m²/s PPFD, and in 2 L photobioreactors at 32 °C, 50 RPM, with 4000 K white LEDs at PPFD from 85 to 430 µmol/m²/s. Growth was measured by OD880 and dry weight; iron was measured by ICP-AES, and C/N by elemental analysis.
- A 40-day pilot cultivation was run from 11 March to 15 April 2015 in a 1000 L tubular Camargue PBR in a 60 m² greenhouse, using fed-batch mode with harvesting and medium supplementation on days 12, 21, and 27. The cost model tested open-pond productivities of 4, 7, and 10 g/m²/day and PBR productivities of 10, 25, and 40 g/m²/day, with CAPEX of 50 €/m² for open ponds and 1000 €/m² for PBR.
Limitations
- The paper states that iron mass balances were not always coherent, with large disparities over duplicates, and that further studies are needed on counter-ion effects and chelating agents such as EDDHA and DTPA.
- The cost model does not account for higher production quality in PBR or for further processing such as harvesting and drying, since those processes were assumed similar for PBRs and open ponds.
- Several experiments lacked replication: the initial biomass concentration experiment had no replicate, the light-intensity experiment had no replicate, and the 1000 L pilot cultivation had no replicates; the iron experiments were in duplicate, while media comparison and dilution experiments were in triplicate.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
2 Valid · 2 Not valid · 11 Not checked · 63 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Two independent studies found that Spirulina final biomass concentration productivity was the highest at the highest photosynthetically photon flux density (PPFD) they used (around 60 µ mol/m 2 /s) [10,21].”
What the sources say
- Not checked — no full text of the sourcecites [10] Markou, 2012, Effects of phosphorus concentration and light intensity on the biomass composition of Arthrospira (Spirulina) platensis, World J. Microbiol. Biotechnol. source
- Partly supportedcites [21] Sato, 2011, Growth and content of Spirulina platensis biomass chlorophyll cultivated at different values of light intensity and temperature using different nitrogen sources, Braz. J. Microbiol. sourceExperimental — accuracy not yet measured
The Results and Discussion (page unavailable) report the highest cell concentration at 60 µmol photons m−2 s−1 and generally higher cell productivity at greater light intensities. But the paper identifies 69 µmol photons m−2 s−1—not approximately 60—as the highest PPFD studied, so it does not support the claim that the maximum concentration occurred at the highest PPFD. (LLM, conf=0.88)
plainstates an associationn = 2- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The average nutrient consumption rates (nitrate, phosphate, and sulfate) were calculated (Table 3). These consumption rates tend to decrease with increasing dilution rate.”
hedgedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The average of daily growth rates from day 0 to day 15 was higher for 20% and 50%-modified ZM (0.145 and 0.142/day, respectively) than for 100%-modified ZM (0.094/day).”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Modified ZM also showed a higher biomass productivity (91.5 ± 4.0 mg/L/day from day 0 to day 13) than modified HM (80.5 ± 1.6 mg/L/day) and modified JM (77.9 ± 3.4 mg/L/day).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, the final biomass concentrations were slightly higher when the initial biomass concentration was also higher (Table 2).”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
44 more claims
Create a free account to see all 78 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 16
- It may state two separate claims as one. 17
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“When the culture is moved, the optimal light intensity for spirulina cultivation and biomass production varies from 250 to 350 W/m2, and the maximum light intensity is 400 W/m2, which is the point at which the growth of the culture ends [47].”
From Tendencies Affecting the Growth and Cultivation of Genus Spirulina: An Investigative Review on Current Trends (2022) · cites this paper as [47]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Arthrospira sp. tend to prefer alkaline environments (ideal pH 10.5), and Euglena sp. can grow in acid environments as low as 3.5 pH (as opposed to Chlorella sp. and Dunaliella sp. who lack this ability) [42,47,52].”
From Biologically-Based and Physiochemical Life Support and In Situ Resource Utilization for Exploration of the Solar System—Reviewing the Current State and Defining Future Development Needs (2021) · cites this paper as [52]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Other studies have shown that light intensity should be over 180 μmol photons m−2 s−1 in order to be effective at stimulating growth and that the maximized intensity is somewhere near 500 μmol photons m−2 s−1 for Spirulina [52,77].”
From Biologically-Based and Physiochemical Life Support and In Situ Resource Utilization for Exploration of the Solar System—Reviewing the Current State and Defining Future Development Needs (2021) · cites this paper as [52]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The selection of the source and concentration of nitrogen by Delrue et al. [47] is significant in the cultivation of phytoplankton because nitrogen influences the metabolic activity, components, and nutritional value of algae.”
From Tendencies Affecting the Growth and Cultivation of Genus Spirulina: An Investigative Review on Current Trends (2022) · cites this paper as [47]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Spirulina thrives in environments with a pH ranging from 9 to 11, and its pH rises from 8.4 to 9.5 throughout the cultivation process as a result of the consumption of bicarbonate and sodium ions.”
From Tendencies Affecting the Growth and Cultivation of Genus Spirulina: An Investigative Review on Current Trends (2022) · cites this paper as [47]
Experimental — accuracy not yet measured
12 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 4. Conclusions
“from 18.71 to 75.29 /kg”
§ Optimization of Arthrospira platensis (Spirulina) Growth: From Laboratory Scale to Pilot Scale
“from 18.71 to 74.29 /kg”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.6. Spirulina Cultivation Run in a 1000 L Camargue PBR 3.6. Spirulina Cultivation Run in a 1000 L Camargue PBR
“During 40 days”
§ 3.6. Spirulina Cultivation Run in a 1000 L Camargue PBR 3.6. Spirulina Cultivation Run in a 1000 L Camargue PBR
“between the 11 March 2015 and 15 April 2015”
Citations
Cites
Stephenson, A. L., Kazamia, E., Dennis, J. S., Howe, C. J., Scott, S. A., & Smith, A. G. (2010) · Energy & Fuels · doi:10.1021/ef1003123 · Cited by 571 · cited 1×
“However, the difficulty of these systems are the low biomass productivity [3,4], less than 15 g/m2/day, the difficultly to maintain optimal cultivation parameters, their high evaporation rates and their weakness towards contamination [5].”
BackgroundCurrent knowledge on potential health benefits of Spirulina
Belay, A., Ota, Y., Miyakawa, K., & Shimamatsu, H. (1993) · Journal of Applied Phycology · doi:10.1007/bf00004024 · Cited by 465 · cited 1×
“Spirulina is considered to be a nutraceutical due to its high nutritional quality (proteins, essential amino acids and fatty acids, polysaccharides, carotenoids, vitamins, and iron) [2].”
BackgroundTokuşoglu, Ö., & üUnal, M. K. (2003) · Journal of Food Science · doi:10.1111/j.1365-2621.2003.tb09615.x · Cited by 446 · cited 1×
“Using typical iron content value of 1 mgFe/g [18], maximal theoretical biomass concentrations are only 0.”
BackgroundSOME APPROACHES TO THE STUDY OF THE ROLE OF METALS IN THE METABOLISM OF MICROORGANISMS
Hutner, S. H., Provasoli, L., Schatz, A., & Haskins, C. P. (2016) · Cited by 426
An economic, sustainability, and energetic model of biodiesel production from microalgae
Delrue, F., Setier, P.-A., Sahut, C., Cournac, L., Roubaud, A., Peltier, G., & Froment, A.-K. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.02.020 · Cited by 335 · cited 2×
“The model described in a previous work [31] was used to compare the production cost of Spirulina in open ponds and in PBRs.”
MethodSelf-citationMicroalgae for Biofuels and Animal Feeds
Benemann, J. (2013) · Energies · doi:10.3390/en6115869 · Cited by 329 · cited 1×
“The common name of its commercialized biomass is “Spirulina” (the name used in this paper) which production makes this microorganism to be the most cultivated worldwide [1].”
BackgroundNutritional and medical applications of spirulina microalgae
Hoseini, S. M., Khosravi-Darani, K., & Mozafari, M. R. (2013) · Mini-Reviews in Medicinal Chemistry · doi:10.2174/1389557511313080009 · Cited by 326 · cited 1×
“Despite low iron concentrations in its cultivation media, Spirulina contains high amount of iron [20] (0.”
BackgroundSoletto, D., Binaghi, L., Lodi, A., Carvalho, J. C. M., & Converti, A. (2005) · Aquaculture · doi:10.1016/j.aquaculture.2004.10.005 · Cited by 256 · cited 1×
“5 g/L) and also nitrogen source (urea better than ammonium or nitrate) [9] has a great effect on Spirulina productivity.”
BackgroundToor, S. S., Reddy, H., Deng, S., Hoffmann, J., Spangsmark, D., Madsen, L. B., Holm-Nielsen, J. B., & Rosendahl, L. A. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.12.144 · Cited by 236
Production and nutritive value of Spirulina platensis in reduced cost media
Madkour, F. F., Kamil, A. E.-W., & Nasr, H. S. (2012) · Egyptian Journal of Aquatic Research · doi:10.1016/j.ejar.2012.09.003 · Cited by 231
Research works printed but not linked: 3
- Marrez, 2013, Impact of Culturing Media on Biomass Production and Pigments Content of Spirulina platensis, Int. J. Adv. Res., 1, 951
- Zarrouk, C. (1966). Contribution à L’étude D’une Cyanophycée: Influence de Divers Facteurs Physiques et Chimiques sur la Croissance et la Photosynthèse de Spirulina maxima (Setch et Gardner) Geitler. [Ph.D. Thesis, Faculté des Sciences de l’Université de Paris].
- Doumandji, 2012, Etude de l’impact de l’incorporation de la spirulinae sur les propriétés nutritionnelles, technologiques et organoleptiques du couscous artisanal, Nat. Technol., 6, 40
Cited by
Items 101–105 of 105
Essid, I., Ciardi, M., Acién, F. G., Gómez, C., Ammar, W. B., & Chaffei-Haouari, C. (2026) · Journal of Applied Phycology · doi:10.1007/s10811-026-03791-2
“…medium used was a modified Zarrouk formulation (Zarrouk 1966) consisting of 0.9 g L ⁻ 1 NaNO ₃ as the primary nitrogen source, 0.14 g L ⁻ 1 KH ₂ PO ₄ , 0.18 g L ⁻ 1 MgSO ₄ , and 4 g L ⁻ 1 NaHCO ₃ to ensure sufficient inorganic carbon for photosynthesis (Madkour and Kamil 2012; Delrue et al. 2017).”
InfluentialCardoso, J. C., Soccol, C. R., Iwamoto, H., Molina-Aulestia, D. T., Oecksler, A. L., Gavio, L., & de Carvalho, J. C. (2026) · Biofuel and biorefinery technologies · doi:10.1007/978-3-032-19898-3_6
Canto, F. Q., Matos, Â. P., Neves, F. D. F., Ikeda, I. K., Oliveira, C. Y. B., Barbosa, K. M., Bonomi‐Barufi, J., & Tribuzi, G. (2026) · Journal of Applied Phycology · doi:10.1007/s10811-026-03920-x · Cited by 1
“Other studies have showed that Spirulina spp. presented growth curves spending around more than 10 days in exponential phase and achieving saturation within 12–15 days, being growth limited after this time (Delrue et al. 2017; Soni et al. 2019).”
Sekine, M., Yoshida, A., Kishi, M., Furuya, K., & Toda, T. (2026) · Journal of Applied Phycology · doi:10.1007/s10811-026-03942-5
Savio, S., Cave, A. D., Ortenzi, F., Rugnini, L., Scuderi, F., Migliore, G., Canini, A., Braglia, R., & Congestri, R. (2026) · Plant Biosystems - An International Journal Dealing with all Aspects of Plant Biology · doi:10.1007/s44473-026-00249-8
“Owing to its established safety profile, Spirulina has been granted “Generally Recognized as Safe” (GRAS) status by both the U.S. Food and Drug Administration and the European Food Safety Authority (Delrue et al. 2017) also acknowledged as “superfood” (Jung et al. 2019).”
Metadata
- Authors
- Delrue, F., Alaux, E., Moudjaoui, L., Gaignard, C., Fleury, G., Perilhou, A., Richaud, P., Petitjean, M., & Sassi, J.-F.
- Affiliations
- Commissariat à l'Énergie Atomique et aux Énergies Alternatives (FR)
- Microphyt, 713 Route de Mudaison, F-34670 Baillargues, France
- Centre National de la Recherche Scientifique (FR)
- Spiruline de la côte bleue, Les fortunés, Route des Bassins, F-13180 Gignac-la-Nerthe, France
- Corresponding author
- Delrue, Florian
- Venue
- Fermentation
- Publisher
- MDPI AG
- Published
- 2017-11-07
- Volume
- 3
- Issue
- 4
- Pages
- 59
- ISSN
- 2311-5637 (ISSN-L)
- OpenAlex
- W2767931645
- Cited by
- 105
- References
- 29
- Citations by year
- 2026: 7 · 2025: 13 · 2024: 18 · 2023: 15 · 2022: 21 · 2021: 15 · 2020: 10 · 2019: 6
- FWCI
- 1.17
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Fermentation (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Algal biology and biofuel production
- Life Sciences › Agricultural and Biological Sciences › Aquatic Science › Aquaculture Nutrition and Growth
- Physical Sciences › Environmental Science › Environmental Chemistry › Aquatic Ecosystems and Phytoplankton Dynamics
- Keywords
- Spirulina platensis, Spirulina, microalgae cultivation, culture medium optimization, iron-EDTA, iron sulfate, iron absorption, light intensity, photoinhibition, specific growth rate, photobioreactors, open pond cultivation, areal productivity, production costs, techno-economic analysis, biomass productivity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-03, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-03 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.