Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index; none of the 49 sources its claims cite is checked for support yet.

Isolation, Screening, and Identification of Alkaline Protease-Producing Bacteria and Application of the Most Potent Enzyme from Bacillus sp. Mar64

Open access

Abstract

In this study, thirty-seven alkaline protease-producing bacteria were recovered from different regions of Saudi Arabia. The proteolytic strain with the highest productivity was identified as Bacillus sp. Mar64. Maximum productivity of Mar64P alkaline protease was reached at 60 h, pH 9.0, and 45 °C using 1% tyrosine and 0.5% maltose as nitrogen and carbon supplies, respectively. Specific activity was intensified to 8.5-fold with a recovery of 12.4% and SDS—PAGE revealed one band at 28 kDa after enzyme purification. Mar64P was maximally active at 55 °C and pH 11.0 with thermal stability up to 70 °C and pH stability at 7.0–12.0 for 1 h. It was inhibited by EDTA and unaffected by PMSF, therefore tentatively classified as metalloprotease-type. Storage efficacy was effective for up to eight weeks and it was durable in presence of organic solvents (20%, v/v) such as acetonitrile, acetone, and isopropanol upto to 15 days. The enzyme was compatible with dry detergents at both low and high temperature, in addition, was successful in removing various stains such as blood, egg yolk, chocolate, tea, coffee, and sweat. Furthermore, it was successful in removing skin hairs and hydrolyzing gelatin of waste X-ray films. Collectively, due to these unique properties, Mar64P could be considered an environmentally friendly candidate in both detergent and leather industries.

Overview

CoChat Summary

TL;DR

Thirty-seven alkaline protease-producing bacteria were isolated from Saudi Arabian soil, and Bacillus sp. Mar64 was selected as the most potent producer. Its purified alkaline protease Mar64P was active and stable at high pH/temperature, compatible with dry detergents, and effective in stain removal, dehairing, and X-ray film gelatin hydrolysis.

Key findings

  • From 130 isolates, 37 alkaline protease producers were recovered; Mar64 produced 159.9 ± 7.2 U/mL in the initial screen (Table 1), and optimized production reached 172.4 U/mL, a 2.78-fold increase over 61.9 U/mL.
  • Purification gave 8.5-fold specific activity with 12.4% recovery; SDS-PAGE showed one band at 28 kDa. Mar64P was optimal at 55 °C and pH 11.0, thermally stable up to 70 °C for 1 h, and pH-stable at 7.0–12.0 for 1 h.
  • Inhibited by EDTA, unaffected by PMSF, tentatively classified as metalloprotease-type; all tested cations were stimulatory, highest with 0.05% Mg²⁺. Storage stability was up to 8 weeks at 4 °C (79.9 U/mL) and 4 weeks at 25 °C (83.5 U/mL); stability was conserved with acetone, acetonitrile, and isopropanol for 15 days, but decreased drastically with toluene.
  • Application tests showed compatibility with dry detergents, best with Omo retaining 97.8% at 25 °C and 85.5% at 55 °C; enhanced destaining of blood, egg, and coffee stains (lowest for chocolate); highest dehairing after 90 min; and hydrolysis of waste X-ray film gelatin within 120 min.

Methods

  • Isolation/screening: 30 soil samples collected January–March 2019 from eastern, central, and western Saudi Arabia; serial dilution on skim milk agar at pH 9.0 and 40 °C for 24 h; 130 isolates recovered, 37 alkaline protease producers selected; most potent isolate identified by 16S rDNA sequencing (Mar64 accession OP429623.1) and metabolic fingerprint.
  • Production/characterization: submerged culture in basal medium; one-factor-at-a-time optimization of incubation period, pH, temperature, carbon source, and nitrogen source; protease assay with azocasein at A₄₄₀ and protein at A₂₈₀; purification by 60% ammonium sulfate precipitation, DEAE-Sepharose CL-6B, and Sephadex G-100 FF; SDS-PAGE.
  • Application tests: detergent compatibility with powdered detergents at 25 °C and 55 °C; cotton fabric stain removal by visual inspection; sheep skin dehairing; waste X-ray film gelatin hydrolysis; all tests in three replications, reported as means ± SD.

Limitations

  • The paper does not state a limitations section.
  • Evident from the text: application outcomes (destaining, dehairing, X-ray film gelatin hydrolysis) were judged mainly by visual inspection, and detergent compatibility/stain removal are reported as relative activities without quantitative stain-removal metrics.
  • Evident from the text: production optimization varied one factor at a time, the metalloprotease classification is tentative based on inhibitor responses, and statistical reporting is limited to means ± SD from three replicates.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/fermentation9070637

Cites

39 of 39 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Phylogenetic tree of strain Bacillus sp. Mar64 using 16SrDNA gene (Accession OP429623.1). Figure 1. Phylogenetic tree of strain Bacillus sp. Mar64 using 16SrDNA gene (Accession number OP429623.1).
Figure 1 Phylogenetic tree of strain Bacillus sp. Mar64 using 16SrDNA gene (Accession OP429623.1). Figure 1. Phylogenetic tree of strain Bacillus sp. Mar64 using 16SrDNA gene (Accession number OP429623.1).CC-BY · From the PDF
Figure 2 SDS-PAGE analysis of the purified Mar64P using 15% ( w / v stacking gel. Lane M signifies the protein markers and Lane 1 correspon Figure 2. SDS-PAGE analysis of the purified Mar64P using 15% ( w / v ) separating gel and 5% ( w / v ) stacking gel. Lane M signifies the protein markers and Lane 1 corresponds to the purified Mar64P.
Figure 2 SDS-PAGE analysis of the purified Mar64P using 15% ( w / v stacking gel. Lane M signifies the protein markers and Lane 1 correspon Figure 2. SDS-PAGE analysis of the purified Mar64P using 15% ( w / v ) separating gel and 5% ( w / v ) stacking gel. Lane M signifies the protein markers and Lane 1 corresponds to the purified Mar64P.CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Figure 7 Wash performance of Mar64P against different stains on white cloth fabrics. Blood, eggs, chocolate, tea, coffee, and sweat stains were used. Each piece was immersed in a solution of one set of experiments at pH 11.0. The sets were (1) distilled water as a control, (2) detergent solution at 7 mg/mL concentration, and (3) detergent solution plus enzyme preparation at concentration 150 U/mL. Incubation was allowed at room temperature (25 °C) for 1 h. 3.7.3. Dehairing Activity Figure 7. Wash performance of Mar64P against different stains on white cloth fabrics. Blood, eggs, chocolate, tea, coffee, and sweat stains were used. Each piece was immersed in a solution of one set of experiments at pH 11.0. The sets were (1) distilled water as a control, (2) detergent solution at 7 mg/mL concentration, and (3) detergent solution plus enzyme preparation at concentration 150 U/mL. Incubation was allowed at room temperature (25 ◦ C) for 1 h. Figure 7. Wash performance of Mar64P against different stains on white cloth fabrics. Blood, eggs, chocolate, tea, coffee, and sweat stains were used. Each piece was immersed in a solution of one set of experiments at pH 11.0. The sets were (1) distilled water as a control, (2) detergent solution at 7 mg/mL concentration, and (3) detergent solution plus enzyme preparation at concentration 150 U/mL. Incubation was allowed at room temperature (25 °C) for 1 h.
Figure 7 Wash performance of Mar64P against different stains on white cloth fabrics. Blood, eggs, chocolate, tea, coffee, and sweat stains were used. Each piece was immersed in a solution of one set of experiments at pH 11.0. The sets were (1) distilled water as a control, (2) detergent solution at 7 mg/mL concentration, and (3) detergent solution plus enzyme preparation at concentration 150 U/mL. Incubation was allowed at room temperature (25 °C) for 1 h. 3.7.3. Dehairing Activity Figure 7. Wash performance of Mar64P against different stains on white cloth fabrics. Blood, eggs, chocolate, tea, coffee, and sweat stains were used. Each piece was immersed in a solution of one set of experiments at pH 11.0. The sets were (1) distilled water as a control, (2) detergent solution at 7 mg/mL concentration, and (3) detergent solution plus enzyme preparation at concentration 150 U/mL. Incubation was allowed at room temperature (25 ◦ C) for 1 h. Figure 7. Wash performance of Mar64P against different stains on white cloth fabrics. Blood, eggs, chocolate, tea, coffee, and sweat stains were used. Each piece was immersed in a solution of one set of experiments at pH 11.0. The sets were (1) distilled water as a control, (2) detergent solution at 7 mg/mL concentration, and (3) detergent solution plus enzyme preparation at concentration 150 U/mL. Incubation was allowed at room temperature (25 °C) for 1 h.CC-BY · From the PDF
Image 8
CC-BY · From the PDF
Image 9
CC-BY · From the PDF
dation of skin proteins. Figure 8. Dehairing activity of Mar64P against pieces of sheep's skin for 150 min exposure. Skin pieces were immersed in a solution of 150 U/mL of Mar64P at pH 11.0 and incubated at 55 °C for 3 h with a shaking speed of 120 rpm. Dehairing activity was checked at time intervals of 30 min by shedding the hair using sterile forceps. Control (C) represents the untreated skin piece with the enzyme. The remaining solution after 120 min exposure was turbid due to the beginning of degradation of skin proteins. Figure 8. Dehairing activity of Mar64P against pieces of sheep's skin for 150 min exposure. Skin pieces were immersed in a solution of 150 U/mL of Mar64P at pH 11.0 and incubated at 55 ◦ C for 3 h with a shaking speed of 120 rpm. Dehairing activity was checked at time intervals of 30 min by shedding the hair using sterile forceps. Control (C) represents the untreated skin piece with the enzyme. The remaining solution after 120 min exposure was turbid due to the beginning of degradation of skin proteins.
dation of skin proteins. Figure 8. Dehairing activity of Mar64P against pieces of sheep's skin for 150 min exposure. Skin pieces were immersed in a solution of 150 U/mL of Mar64P at pH 11.0 and incubated at 55 °C for 3 h with a shaking speed of 120 rpm. Dehairing activity was checked at time intervals of 30 min by shedding the hair using sterile forceps. Control (C) represents the untreated skin piece with the enzyme. The remaining solution after 120 min exposure was turbid due to the beginning of degradation of skin proteins. Figure 8. Dehairing activity of Mar64P against pieces of sheep's skin for 150 min exposure. Skin pieces were immersed in a solution of 150 U/mL of Mar64P at pH 11.0 and incubated at 55 ◦ C for 3 h with a shaking speed of 120 rpm. Dehairing activity was checked at time intervals of 30 min by shedding the hair using sterile forceps. Control (C) represents the untreated skin piece with the enzyme. The remaining solution after 120 min exposure was turbid due to the beginning of degradation of skin proteins.CC-BY · From the PDF
Image 11
CC-BY · From the PDF
Figure 9 Decomposition of the gelatin layer of used X-ray films. Pieces of X-ray films were immersed in flasks containing the 150 U/mL enzyme preparation at pH 11.0 and incubation was carried out at 55 ° C for 3 h with a shaking speed of 120 rpm. With time the process of gradual removal of gelatin layer and the release of silver atoms by the alkaline protease were observed . The control test wasn't treated with enzyme. Figure 9. Decomposition of the gelatin layer of used X-ray films. Pieces of X-ray films were immersed in flasks containing the 150 U/mL enzyme preparation at pH 11.0 and incubation was carried out at 55 ◦ C for 3 h with a shaking speed of 120 rpm. With time the process of gradual removal of gelatin layer and the release of silver atoms by the alkaline protease were observed. The control test wasn't treated with enzyme.
Figure 9 Decomposition of the gelatin layer of used X-ray films. Pieces of X-ray films were immersed in flasks containing the 150 U/mL enzyme preparation at pH 11.0 and incubation was carried out at 55 ° C for 3 h with a shaking speed of 120 rpm. With time the process of gradual removal of gelatin layer and the release of silver atoms by the alkaline protease were observed . The control test wasn't treated with enzyme. Figure 9. Decomposition of the gelatin layer of used X-ray films. Pieces of X-ray films were immersed in flasks containing the 150 U/mL enzyme preparation at pH 11.0 and incubation was carried out at 55 ◦ C for 3 h with a shaking speed of 120 rpm. With time the process of gradual removal of gelatin layer and the release of silver atoms by the alkaline protease were observed. The control test wasn't treated with enzyme.CC-BY · From the PDF

Verification

Claims the paper makes

0 Valid · 0 Not valid · 38 Not checked · 69 Own results and interpretations

55 more claims

Create a free account to see all 107 claims and to verify the 49 references still open.

See all claims — free account
  • It may state two separate claims as one. 32
  • Probably not a substantial claim. 25

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

2 of 2

Citations

Cites

Cited by

See all 51

Metadata

Authors
Kotb, E., Alabdalall, A. H., Alsayed, M. A., Alghamdi, A. I., Alkhaldi, E., AbdulAzeez, S., & Borgio, J. F.
Affiliations
Imam Abdulrahman Bin Faisal University (SA)
Corresponding author
Kotb, Essam
Venue
Fermentation
Publisher
MDPI AG
Published
2023-07-07
Volume
9
Issue
7
Pages
637
ISSN
2311-5637 (ISSN-L)
OpenAlex
W4383554125
Cited by
51
References
39
Citations by year
2026: 15 · 2025: 23 · 2024: 12 · 2023: 1
FWCI
4.86
Type
journal article
Language
en
Open access
Locations
  • Fermentation (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia (IF-2020-028-BASRC)
  • Imam Abdulrahman bin Faisal University (IAU)/Basic and Applied Scientific Research Center (BASRC) (IF-2020-028-BASRC)
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Biotechnology › Enzyme Production and Characterization
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Enzyme Catalysis and Immobilization
  • Physical Sciences › Chemistry › Organic Chemistry › Tannin, Tannase and Anticancer Activities
Keywords
alkaline protease, enzyme production optimization, metalloproteinases, enzyme stability, enzyme storage stability, stain removal, leather industry, gelatin hydrolysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.