The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Production of Nanocellulose from Pineapple Leaf Fibers via High-Shear Homogenization and Ultrasonication
Open accessAbstract
In this study, the isolation and characterization of nanocellulose from pineapple leaf fibers (PLF) were carried out. Chemical pretreatment included pulping, bleaching, and acid hydrolysis to remove lignin, hemicellulose, and extractive substances were conducted. This was followed by high-shear homogenization and ultrasonication to produce nanocellulose. Morphological changes to the PLF due to treatment were investigated using scanning electron microscopy (SEM). This showed that the PLF had a diameter of 1–10 µm after high-shear homogenizing. Transmission electron microscopy (TEM) indicated that the nanofibers after ultrasonication for 60 min showed 40–70 nm diameters. Particle size analysis (PSA) indicates that the fibers had an average diameter of 68 nm. Crystallinity index was determined by X-ray diffraction (XRD) and had the highest value after acid hydrolysis at 83% but after 60 min ultrasonication, this decreased to 62%. Meanwhile, Fourier transform infrared (FTIR) spectroscopy showed there was no chemical structure change after acid hydrolysis. The most significant finding from thermal gravimetric analysis (TGA) is that the higher degradation temperature of nanofibers indicates superior thermal stability over untreated fiber. These results indicate that PLF waste could become a viable source of commercially valuable nanocellulose.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Chen, W., Yu, H., Liu, Y., Hai, Y., Zhang, M., & Chen, P. (2011) · Cellulose · doi:10.1007/s10570-011-9497-z · Cited by 541
Cited by
A review of nanocellulose as a new material towards environmental sustainability
Dhali, K., Ghasemlou, M., Daver, F., Cass, P., & Adhikari, B. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145871 · Cited by 417
PLA based biocomposites for sustainable products: A review
Trivedi, A. K., Gupta, M. K., & Singh, H. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.02.002 · Cited by 337
Hoo, D. Y., Low, Z. L., Low, D. Y. S., Tang, S. Y., Manickam, S., Tan, K. W., & Ban, Z. H. (2022) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2022.106176 · Cited by 309
Emerging technologies for the production of nanocellulose from lignocellulosic biomass
Pradhan, D., Jaiswal, A. K., & Jaiswal, S. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119258 · Cited by 294
Transparent and antimicrobial cellulose film from ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Pratama, A. B., Fajri, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105266 · Cited by 290
Self-citation
Metadata
- Authors
- Mahardika, M., Abral, H., Kasim, A., Arief, S., & Asrofi, M.
- Venue
- Fibers
- Publisher
- MDPI AG
- Published
- 2018-05-03
- Volume
- 6
- Issue
- 2
- Pages
- 28
- ISSN
- 2079-6439 (ISSN-L)
- OpenAlex
- W2801845012
- Cited by
- 234
- References
- 3
- FWCI
- 5.37
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production of Nanocellulose from Pineapple Leaf Fibers via High-Shear Homogenization and Ultrasonication. https://app.cochat.ai/papers/10.3390/fib6020028
- The paper
- Mahardika, M., Abral, H., Kasim, A., Arief, S., & Asrofi, M. (2018). Production of Nanocellulose from Pineapple Leaf Fibers via High-Shear Homogenization and Ultrasonication. Fibers. https://doi.org/10.3390/fib6020028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.