Recyclability and Redesign Challenges in Multilayer Flexible Food Packaging—A Review
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Multilayer flexible food packaging is under pressure to redesign for recyclability. Most multilayer films are not sorted and recycled with the currently available infrastructure, which is based on mechanical recycling in most countries. Up to now, multilayer flexible food packaging was highly customizable. Diverse polymers and non-polymeric layers allowed a long product shelf-life and an optimized material efficiency. The need for more recyclable solutions asks for a reduction in the choice of material. Prospectively, there is a strong tendency that multilayer flexible barrier packaging should be based on polyolefins and a few recyclable barrier layers, such as aluminium oxide (AlOx) and silicon oxide (SiOx). The use of ethylene vinyl alcohol (EVOH) and metallization could be more restricted in the future, as popular Design for Recycling Guidelines have recently reduced the maximum tolerable content of barrier materials in polyolefin packaging. The substitution of non-recyclable flexible barrier packaging is challenging because only a limited number of barriers are available. In the worst case, the restriction on material choice could result in a higher environmental burden through a shortened food shelf-life and increased packaging weights.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Recycling of Polymer-Based Multilayer Packaging: A Review
Kaiser, K., Schmid, M., & Schlummer, M. (2017) · Recycling · doi:10.3390/recycling3010001 · Cited by 549
Plastic waste from recycling centres: characterisation and evaluation of plastic recyclability
Faraca, G., & Astrup, T. (2019) · Waste Management · doi:10.1016/j.wasman.2019.06.038 · Cited by 370
Recycling potential of post-consumer plastic packaging waste in Finland
Dahlbo, H., Poliakova, V., Mylläri, V., Sahimaa, O., & Anderson, R. (2018) · Waste Management · doi:10.1016/j.wasman.2017.10.033 · Cited by 364
Assessment of plastic packaging waste: material origin, methods, properties
Luijsterburg, B., & Goossens, H. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.010 · Cited by 198
On the brink of a recycling revolution?
Carey, J. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1620655114 · Cited by 41
Metadata
- Authors
- Bauer, A.-S., Tacker, M., Uysal-Unalan, I., Cruz, R. M. S., Varzakas, T., & Krauter, V.
- Venue
- Foods
- Publisher
- MDPI AG
- Published
- 2021-11-05
- Volume
- 10
- Issue
- 11
- Pages
- 2702
- ISSN
- 2304-8158 (ISSN-L)
- OpenAlex
- W3213251925
- Cited by
- 164
- References
- 8
- FWCI
- 3.37
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recyclability and Redesign Challenges in Multilayer Flexible Food Packaging—A Review. https://app.cochat.ai/papers/10.3390/foods10112702
- The paper
- Bauer, A.-S., Tacker, M., Uysal-Unalan, I., Cruz, R. M. S., Varzakas, T., & Krauter, V. (2021). Recyclability and Redesign Challenges in Multilayer Flexible Food Packaging—A Review. Foods. https://doi.org/10.3390/foods10112702
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.