CoChat

Thermal Activation of Digested Sewage Sludges for Carbon Dioxide Removal from Biogas

Open access

The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.

Abstract

Anaerobically digested sewage sludges were used as feedstock in the production of activated carbons through physical activation. These char samples were experimentally tested as adsorbents for the removal of CO2 from a simulated biogas mixture. The CO2 concentration level allowed in biomethane was fixed from the European Standards EN 16723-1 and EN 16723-2. The char yield and the subsequent adsorption capacity values were studied, considering the operating parameters of the process. A physical activation process was considered with the following parameters: the temperature, the dwell time, the activating agent, the heating rate, the flow rate, and the method. Among the adsorption tests, the activating temperature and the agent employed affected the CO2 removal. The maximum adsorption capacity was achieved with nitrogen as an activating agent at 600 °C, with 2 h of dwell time (102.5 mg/g).

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/fuels1010004

Cites

49 of 49 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Scheme of the experimental set-up: MFC, mass flow controllers. Figure 1. Scheme of the experimental set-up: MFC, mass flow controllers.
Figure 1 Scheme of the experimental set-up: MFC, mass flow controllers. Figure 1. Scheme of the experimental set-up: MFC, mass flow controllers.CC-BY · From the PDF
Figure 2 Temperature's influence on the activated char yield during the physical activations. Figure 2. Temperature's influence on the activated char yield during the physical activations.
Figure 2 Temperature's influence on the activated char yield during the physical activations. Figure 2. Temperature's influence on the activated char yield during the physical activations.CC-BY · From the PDF
Figure 3 Activated char yield comparison with different residence times, considering as the activating agent: ( a ) N2, and ( b ) CO2. Figure 3. Activated char yield comparison with di erent residence times, considering as the activating agent: ( a ) N2 , and ( b ) CO2.
Figure 3 Activated char yield comparison with different residence times, considering as the activating agent: ( a ) N2, and ( b ) CO2. Figure 3. Activated char yield comparison with di erent residence times, considering as the activating agent: ( a ) N2 , and ( b ) CO2.CC-BY · From the PDF
Figure 4 Cont .
Figure 4 Cont .CC-BY · From the PDF
Figure 4 Parameters affecting the char yield: ( a ) activating gas, ( b ) activation method, ( c ) heating rate, and ( d ) flow rate. Figure 4. Parameters a ecting the char yield: ( a ) activating gas, ( b ) activation method, ( c ) heating rate, and ( d ) flow rate.
Figure 4 Parameters affecting the char yield: ( a ) activating gas, ( b ) activation method, ( c ) heating rate, and ( d ) flow rate. Figure 4. Parameters a ecting the char yield: ( a ) activating gas, ( b ) activation method, ( c ) heating rate, and ( d ) flow rate.CC-BY · From the PDF
Figure 5 Element concentration variation in comparison with the precursor composition (temperature range 400-600 °C), with N2 and CO2 the as activating agents. Figure 5. Element concentration variation in comparison with the precursor composition (temperature range 400-600 C), with N2 and CO2 the as activating agents.
Figure 5 Element concentration variation in comparison with the precursor composition (temperature range 400-600 °C), with N2 and CO2 the as activating agents. Figure 5. Element concentration variation in comparison with the precursor composition (temperature range 400-600 C), with N2 and CO2 the as activating agents.CC-BY · From the PDF
Figure 6 Cont .
Figure 6 Cont .CC-BY · From the PDF
Figure 6 Optimization process influence of: ( a ) the dwell time, ( b ) the post-activation drying temperature, ( c ) the flow rate, and ( d ) the heating rate. Figure 6. Optimization process influence of: ( a ) the dwell time, ( b ) the post-activation drying temperature, ( c ) the flow rate, and ( d ) the heating rate.
Figure 6 Optimization process influence of: ( a ) the dwell time, ( b ) the post-activation drying temperature, ( c ) the flow rate, and ( d ) the heating rate. Figure 6. Optimization process influence of: ( a ) the dwell time, ( b ) the post-activation drying temperature, ( c ) the flow rate, and ( d ) the heating rate.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 49 references

Research works printed but not linked: 2

  1. Gent, S., Twedt, M., Gerometta, C., and Almberg, E. (2017). Theoretical and Applied Aspects of Biomass Torrefaction, Elsevier.
  2. Gabelman, 2017, Adsorption Basics: Part 1, Chem. Eng. Prog., 113, 48

Cited by

See all 10

Metadata

Authors
Tinnirello, M., Papurello, D., Santarelli, M., & Fiorilli, S.
Affiliations
Politecnico di Torino (IT)
Corresponding author
Papurello, Davide
Venue
Fuels
Publisher
MDPI AG
Published
2020-10-22
Volume
1
Issue
1
Pages
30-46
ISSN
2673-3994 (ISSN-L)
OpenAlex
W3094521254
Cited by
10
References
49
Citations by year
2025: 2 · 2024: 1 · 2023: 3 · 2021: 4
FWCI
0.86
Type
journal article
Language
en
Open access
Locations
  • Fuels (publishedVersion, cc-by)
  • PORTO@Iris (submittedVersion, cc-by)
  • INFM-OAR (INFN Catania) (submittedVersion, cc-by)
  • Zenodo (CERN European Organization for Nuclear Research) (other-oa)
Funders
Politecnico di Torino
Topics
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
Keywords
sewage sludge, anaerobic digestion, activated carbon, physical activation, carbon dioxide removal, biogas upgrading, biomethane, adsorption capacity, thermal activation, char

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Thermal Activation of Digested Sewage Sludges for Carbon Dioxide Removal from Biogas. https://app.cochat.ai/papers/10.3390/fuels1010004
The paper
Tinnirello, M., Papurello, D., Santarelli, M., & Fiorilli, S. (2020). Thermal Activation of Digested Sewage Sludges for Carbon Dioxide Removal from Biogas. Fuels. https://doi.org/10.3390/fuels1010004

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.