Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index; none of the 15 sources its claims cite is checked for support yet.

Composite HPMC-Gelatin Films Loaded with Cameroonian and Manuka Honeys Show Antibacterial and Functional Wound Dressing Properties

Open access
Boateng, Joshua, Khan, Sana · 2025 · Gels

Abstract

Antimicrobial resistance in infected chronic wounds present significant risk of complications (e.g., amputations, fatalities). This research aimed to formulate honey-loaded hydrocolloid film comprising gelatin and HPMC, for potential treatment of infected chronic wounds. Honeys from different sources (Cameroonian and Manuka) were used as the bioactive ingredients and their functional characteristics evaluated and compared. The formulated solvent cast films were functionally characterized for tensile, mucoadhesion and moisture handling properties. The morphology and physical characteristics of the films were also analyzed using FTIR, X-ray diffraction and scanning electron microscopy. Antibacterial susceptibility testing was performed to study the inhibition of Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus by honey components released from the films. The % elongation values (8.42–40.47%) increased, elastic modulus (30.74–0.62 Nmm) decreased, the stickiness (mucoadhesion) (0.9–1.9 N) increased, equilibrium water content (32.9–72.0%) and water vapor transmission rate (900–298 gm2 day−1) generally decreased, while zones of inhibition (2.4–6.5 mm) increased with increasing honey concentration for 1 and 5% w/v, respectively. The results generally showed similar performance for the different honeys and demonstrate the efficacy of honey-loaded hydrocolloid films as potential wound dressing against bacterial growth and potential treatment of infected chronic wounds.

Overview

CoChat Summary

TL;DR

Composite HPMC-gelatin hydrocolloid films loaded with Cameroonian or Manuka honey were formulated and characterized as potential wound dressings. Honey acted as a plasticizer and conferred antibacterial activity against *E. coli*, *P. aeruginosa*, and *S. aureus*, with generally similar performance across honey types.

Key findings

  • The optimum blank formulation was 1% w/v 3:1 HPMC:gelatin; honey-loaded films were clear, homogeneous, flexible, and had folding endurance >300. Increasing honey increased % elongation at break (8.42–40.47%) and decreased elastic modulus (30.74–0.62 Nmm), consistent with plasticization; tensile strength was lower than blank films.
  • Mucoadhesion/stickiness increased from 0.9 to 1.9 N with increasing honey concentration. Equilibrium water content increased from 32.9% to 72.0%. WVTR values were 900–298 g/m²/day and generally decreased with increasing honey concentration; all were below the recommended 2000–2500 g/m²/day for highly exuding chronic wounds, making the films more suitable for low-to-moderate exuding wounds.
  • All honey-loaded films inhibited *E. coli*, *P. aeruginosa*, and *S. aureus*; zones of inhibition increased from 2.4 to 6.5 mm as honey concentration increased from 1 to 5% w/v. ZOIs were similar to pure honeys but significantly lower (p < 0.01) than pure honeys, suggesting controlled release; no effective MIC was found in broth dilution (all tubes remained cloudy).
  • FTIR, XRD, and SEM indicated compatible, homogeneous, amorphous films; no significant difference was seen between the different honey types, though spherical impressions were more prominent on CWH films.

Methods

  • Solvent-cast composite films: blank gels at 1–2% w/v with various HPMC:gelatin ratios; honey-loaded films used 1% w/v 3:1 HPMC:gelatin gels loaded with Cameroonian wild, Cameroonian standard, and Manuka honeys at different concentrations (1–5% w/v). Films dried at 55 °C for 17–18 h.
  • Characterization: thickness and folding endurance; texture analyzer for tensile properties (% elongation, tensile strength, elastic modulus); in vitro mucoadhesion on gelatin substrate with simulated wound fluid; EWC and WVTR; SEM, FTIR, XRD.
  • Antibacterial testing: Kirby-Bauer disc diffusion against *E. coli*, *P. aeruginosa*, and *S. aureus* with ZOI measurement; broth dilution for MIC/MBC; statistics by t-test and/or one-way ANOVA with Bonferroni post hoc, significance at p < 0.05 or p < 0.01.

Limitations

  • Stated: current work is limited to physico-chemical and in vitro antibacterial testing; further in vitro (fibroblasts and keratinocytes) and in vivo animal wound infection studies are needed. Release profiles, duration of activity, and dressing-change frequency require future study.
  • Stated: MIC testing with small film strips was ineffective (all tubes cloudy); whole films rather than small strips and dilution to relevant levels are needed. Honey purchased from local market/supermarket may vary between batches, requiring standardization and palynological analysis to verify botanical origin. WVTR below recommended for highly exuding wounds means risk of exudate collection; films are more suited to low-to-medium exuding wounds.
  • Evident from text: no in vivo, biocompatibility/cytotoxicity, or clinical data are reported; amorphous films may be less stable and require controlled storage. The paper also notes future optimization by design of experiments and comparison with gelatin-only films to assess gelatin’s direct contribution.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/gels11070557

Cites

34 of 34 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Visual images of selected representative honey-loaded films (prepared from 1% w/v gels comprising HPMC: gelatin 3:1—see Table 1), containing the three types of honey (CWH4, CSH8 and MH10, respectively—see Table 2) used in the study. The images showed good compatibility between the honey and the polymers and demonstrated that the films were moderately transparent [22].
Figure 1 Visual images of selected representative honey-loaded films (prepared from 1% w/v gels comprising HPMC: gelatin 3:1—see Table 1), containing the three types of honey (CWH4, CSH8 and MH10, respectively—see Table 2) used in the study. The images showed good compatibility between the honey and the polymers and demonstrated that the films were moderately transparent [22].CC BY · PubMed Central
Figure 2 Mean film thickness of final optimized formulations (n = 3; ±SD) showing differences between the blank and honey loaded films. Generally, addition of honey resulted in significant increases in thickness compared to the blank films (* p < 0.05 showing significant difference between the honey-loaded film with highest concentration of honey to the blank films).
Figure 2 Mean film thickness of final optimized formulations (n = 3; ±SD) showing differences between the blank and honey loaded films. Generally, addition of honey resulted in significant increases in thickness compared to the blank films (* p < 0.05 showing significant difference between the honey-loaded film with highest concentration of honey to the blank films).CC BY · PubMed Central
Figure 3 (a) Elongation at break, tensile strength and (b) elastic modulus (right) for blank films (n = 3; ±SD). The differences in tensile strength/% elongation when comparing between BLA1 and BLA2/BLA3 were significant at p < 0.05 (*) and p < 0.01 (**), respectively, while no significant (ns) differences (p > 0.05) were observed between the elastic modulus values for the three blank films.
Figure 3 (a) Elongation at break, tensile strength and (b) elastic modulus (right) for blank films (n = 3; ±SD). The differences in tensile strength/% elongation when comparing between BLA1 and BLA2/BLA3 were significant at p < 0.05 (*) and p < 0.01 (**), respectively, while no significant (ns) differences (p > 0.05) were observed between the elastic modulus values for the three blank films.CC BY · PubMed Central
Figure 4 (a) % Elongation at break (b) elastic modulus; (c) tensile strength of honey-loaded hydrocolloid films. Significant difference between the films with lowest and highest concentrations of honey at p < 0.05 (*) and p < 0.01 (**), respectively.
Figure 4 (a) % Elongation at break (b) elastic modulus; (c) tensile strength of honey-loaded hydrocolloid films. Significant difference between the films with lowest and highest concentrations of honey at p < 0.05 (*) and p < 0.01 (**), respectively.CC BY · PubMed Central
Figure 5 Mucoadhesion of hydrocolloid films with SWF. Significant difference between the blank films and films with the highest concentrations of honey at p < 0.05 (*).
Figure 5 Mucoadhesion of hydrocolloid films with SWF. Significant difference between the blank films and films with the highest concentrations of honey at p < 0.05 (*).CC BY · PubMed Central
Figure 6 SEM images showing surface morphology of the blank and honey-loaded films. The figure demonstrates smooth homogeneous appearance for the blank film while the honey-loaded films showed circular patches on the surfaces but no obvious pores. The figure clearly shows how water evaporates during the sample preparation process, which is normal for the solvent casting approach for preparing films. Overall, both the blank and honey-loaded films did not exhibit any major deformities.
Figure 6 SEM images showing surface morphology of the blank and honey-loaded films. The figure demonstrates smooth homogeneous appearance for the blank film while the honey-loaded films showed circular patches on the surfaces but no obvious pores. The figure clearly shows how water evaporates during the sample preparation process, which is normal for the solvent casting approach for preparing films. Overall, both the blank and honey-loaded films did not exhibit any major deformities.CC BY · PubMed Central
Figure 7 FTIR spectra of the pure starting materials (a) gelatin and HPMC; (b) three honey types.
Figure 7 FTIR spectra of the pure starting materials (a) gelatin and HPMC; (b) three honey types.CC BY · PubMed Central
Figure 8 FTIR spectra of the honey-loaded films (a) CW, (b) CS, and (c) MH containing different concentrations of the honeys.
Figure 8 FTIR spectra of the honey-loaded films (a) CW, (b) CS, and (c) MH containing different concentrations of the honeys.CC BY · PubMed Central
Figure 9 XRD diffractograms of honey-loaded films (a) CW, (b) CS and (c) MH containing different concentrations of the honeys.
Figure 9 XRD diffractograms of honey-loaded films (a) CW, (b) CS and (c) MH containing different concentrations of the honeys.CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 0 Not valid · 11 Not checked · 70 Own results and interpretations

49 more claims

Create a free account to see all 81 claims and to verify the 15 references still open.

See all claims — free account
  • It may state two separate claims as one. 21
  • The quote only partly states this claim. 1
  • Probably not a substantial claim. 5

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 34 references

Metadata

Authors
Boateng, J., & Khan, S.
Affiliations
University of Greenwich (GB)
Corresponding author
Boateng, Joshua
Venue
Gels
Publisher
MDPI AG
Published
2025-07-19
Volume
11
Issue
7
Pages
557
ISSN
2310-2861 (ISSN-L)
OpenAlex
W4412517311
Cited by
9
References
34
Citations by year
2026: 9
FWCI
5.10
Type
journal article
Language
en
Open access
Locations
  • Gels (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • PubMed Central (publishedVersion, cc-by)
  • Greenwich Academic Literature Archive (University of Greenwich) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Health Sciences › Medicine › Surgery › Wound Healing and Treatments
  • Life Sciences › Agricultural and Biological Sciences › Insect Science › Bee Products Chemical Analysis
  • Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
Keywords
hydroxypropyl methylcellulose, gelatin films, manuka honey, wound dressings, antibacterial activity, mucoadhesion, tensile properties, water vapor transmission rate, equilibrium water content, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Composite HPMC-Gelatin Films Loaded with Cameroonian and Manuka Honeys Show Antibacterial and Functional Wound Dressing Properties. https://app.cochat.ai/papers/10.3390/gels11070557
The paper
Boateng, J., & Khan, S. (2025). Composite HPMC-Gelatin Films Loaded with Cameroonian and Manuka Honeys Show Antibacterial and Functional Wound Dressing Properties. Gels. https://doi.org/10.3390/gels11070557

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.