Corrosion Resistance of MgZn Alloy Covered by Chitosan-Based Coatings
Open accessThe DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
Chitosan coatings are deposited on the surface of Mg20Zn magnesium alloy by means of the spin coating technique. Their structure was investigated using Fourier Transform Infrared Spectroscopy (FTIR) an X-ray photoelectron spectroscopy (XPS). The surface morphology of the magnesium alloy substrate and chitosan coatings was determined using Scanning Electron Microscope (FE-SEM) analysis. Corrosion tests (linear sweep voltamperometry and chronoamperometry) were performed on uncoated and coated magnesium alloy in the Hank’s solution. In both cases, the hydrogen evolution method was used to calculate the corrosion rate after 7-days immersion in the Hank’s solution at 37 °C. It was found that the corrosion rate is 3.2 mm/year and 1.2 mm/year for uncoated and coated substrates, respectively. High corrosion resistance of Mg20Zn alloy covered by multilayer coating (CaP coating + chitosan water glass) is caused by formation of CaSiO3 and Ca3(PO4)2 compounds on its surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Chitosan (CS), a cationic polymer obtained through deacetylation of chitin, exhibits antibacterial activity and tissue adhesive properties [19].”
From Functional Surface Modification of Magnesium Implant by Drug-Loaded Biodegradable Polymer Coating (2026) · cites this paper as [19]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermogravimetric and FTIR studies of chitosan blends
Pawlak, A., & Mucha, M. (2003) · Thermochimica Acta · doi:10.1016/s0040-6031(02)00523-3 · Cited by 927 · cited 2×
“It can be noticed that the main band appearing in the spectrum of chitosan coating (red curve, Figure 3) is due to stretching vibration of hydroxyl (OH) and N-H groups in the range from 3700 cm−1 to 3000 cm−1 and C-H bond in −CH2 (v = 2930 cm−1), and −CH3 (v = 2875 cm−1) groups, respectively [29,44].”
BackgroundGenipin-crosslinked chitosan hydrogels as biomedical and pharmaceutical aids
Muzzarelli, R. A. A. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.01.016 · Cited by 733 · cited 1×
“It was shown [36,37] that chitosan coatings, with a crosslinking degree of up to 42%, provide good anticorrosive properties for AZ31 alloy in SBF.”
BackgroundProgress and Challenge for Magnesium Alloys as Biomaterials
Zeng, R., Dietzel, W., Witte, F., Hort, N., & Blawert, C. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800035 · Cited by 680
Avcu, E., Baştan, F. E., Abdullah, H. Z., Rehman, M. A. U., Avcu, Y. Y., & Boccaccini, A. R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.01.001 · Cited by 358 · cited 3×
“It can be noticed that the main band appearing in the spectrum of chitosan coating (red curve, Figure 3) is due to stretching vibration of hydroxyl (OH) and N-H groups in the range from 3700 cm−1 to 3000 cm−1 and C-H bond in −CH2 (v = 2930 cm−1), and −CH3 (v = 2875 cm−1) groups, respectively [29,44].”
BackgroundVieira, R. S., Oliveira, M. L. M., Guibal, E., Rodríguez-Castellón, E., & Beppu, M. M. (2011) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.11.022 · Cited by 339 · cited 2×
“24 eV, recorded in the N1s spectrum, is assigned to C–N bond present in the chitosan molecule [48].”
BackgroundJanning, C., Willbold, E., Vogt, C., Nellesen, J., Meyer-Lindenberg, A., Windhagen, H., Thorey, F., & Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.037 · Cited by 321 · cited 1×
“The excess of magnesium ions can be safely excreted in the urine with ease, and Mg has positive effect on the growth of new bone tissue [3,4].”
BackgroundGenipin-crosslinked chitosan/gelatin blends for biomedical applications
Chiono, V., Pulieri, E., Vozzi, G., Ciardelli, G., Ahluwalia, A., & Giusti, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3212-5 · Cited by 297 · cited 1×
“It was shown [36,37] that chitosan coatings, with a crosslinking degree of up to 42%, provide good anticorrosive properties for AZ31 alloy in SBF.”
BackgroundBioactive glass coatings on metallic implants for biomedical applications
Oliver, J.-A. N., Su, Y., Lu, X., Kuo, P.-H., Du, J., & Zhu, D. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.09.002 · Cited by 223 · cited 1×
“They include bioactive glass (BG) [21,24,26,28,32,33,38,39], hydroxyapatite [27,29,34,35,40], carbon nanotubes [41], Fe3O4 nanoparticles [34,35], and mineralized bone allograft nanoparticles [42].”
BackgroundSurface modification of biodegradable magnesium and its alloys for biomedical applications
Tian, P., & Liu, X. (2015) · Regenerative Biomaterials · doi:10.1093/rb/rbu013 · Cited by 218 · cited 1×
“The most popular coatings are hydroxides-based coatings [6,7], metal oxide based coatings [8,9], silane sol-gel coatings [10–12], Ca-P coatings [13–15] and polymer coatings [16,17].”
BackgroundProtection of magnesium alloys: From physical barrier coating to smart self-healing coating
Zhang, D., Peng, F., & Liu, X. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.157010 · Cited by 182
Electrophoretic deposition of chitosan
Simchi, A., Pishbin, F., & Boccaccini, A. R. (2009) · Materials Letters · doi:10.1016/j.matlet.2009.07.046 · Cited by 152
Aerosol deposition of hydroxyapatite–chitosan composite coatings on biodegradable magnesium alloy
Hahn, B., Park, D.-S., Choi, J., Ryu, J., Yoon, W., Choi, J., Kim, H., & Kim, S. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.11.029 · Cited by 136 · cited 3×
“Chitosan coatings can be deposited by dip coating [21–23], spin coating [3], layer–by–layer (LBL) coating (multilayer deposition) [24,25], chemical conversion [26], or aerosol deposition (AD) [27].”
BackgroundHeise, S., Höhlinger, M., Torres, Y., Pavón, J. J., Rodríguez-Ortiz, J. A., Wagener, V., Virtanen, S., & Boccaccini, A. R. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.081 · Cited by 133
An Hydrogen Evolution Method for the Estimation of the Corrosion Rate of Magnesium Alloys
Song, G., Atrens, A., & StJohn, D. H. (2001) · doi:10.1002/9781118805497.ch44 · Cited by 127
Surface modification and cytotoxicity of Mg-based bio-alloys: An overview of recent advances
Ali, M., Elsherif, M., Salih, A. E., Ul‐Hamid, A., Hussein, M. A., Park, S., Yetisen, A. K., & Butt, H. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.154140 · Cited by 114 · cited 1×
“The most popular coatings are hydroxides-based coatings [6,7], metal oxide based coatings [8,9], silane sol-gel coatings [10–12], Ca-P coatings [13–15] and polymer coatings [16,17].”
BackgroundThe role of microstructure in localized corrosion of magnesium alloys
Raman, R. K. S. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0233-5 · Cited by 113 · cited 1×
“Because of low density and particularly good mechanical properties, magnesium alloys are widely used as a construction material in the automotive and aerospace sectors [1,2].”
BackgroundLong-term antibiotic delivery by chitosan-based composite coatings with bone regenerative potential
Ordikhani, F., & Simchi, A. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.07.197 · Cited by 103
Gao, F., Hu, Y., Gong, Z., Liu, T., Gong, T., Liu, S., Zhang, C., Li, Q., Kaveendran, B., & Pan, C. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109947 · Cited by 102 · cited 2×
“Chitosan coatings can be deposited by dip coating [21–23], spin coating [3], layer–by–layer (LBL) coating (multilayer deposition) [24,25], chemical conversion [26], or aerosol deposition (AD) [27].”
BackgroundChitosan coatings crosslinked with genipin for corrosion protection of AZ31 magnesium alloy sheets
Pozzo, L. D. Y., da Conceição, T. F., Spinelli, A., Scharnagl, N., & Pires, A. T. N. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.055 · Cited by 97 · cited 8×
“Chitosan/BG coatings reduce the corrosion rate of magnesium-based substrates in SBF [21,28,32,34].”
BackgroundInfluentialBai, K., Zhang, Y., Fu, Z., Zhang, C., Cui, X., Meng, E., Guan, S., & Hu, J. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.12.102 · Cited by 96 · cited 10×
“Chitosan/BG coatings reduce the corrosion rate of magnesium-based substrates in SBF [21,28,32,34].”
BackgroundInfluentialRen, Y., Babaie, E., & Bhaduri, S. B. (2018) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2018.01.014 · Cited by 95 · cited 1×
“The most popular coatings are hydroxides-based coatings [6,7], metal oxide based coatings [8,9], silane sol-gel coatings [10–12], Ca-P coatings [13–15] and polymer coatings [16,17].”
BackgroundFabrication of calcium phosphate/chitosan coatings on AZ91D magnesium alloy with a novel method
Wu, C., Wen, Z., Dai, C., Lu, Y., & Yang, F. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.03.045 · Cited by 90 · cited 3×
“The FTIR spectrum obtained for the CaP coating (green curve in Figure 3) shows the adsorption bands in the range from 528 cm−1 to 1124 cm−1 assigned to phosphate groups [40].”
BackgroundProtection of the AZ31 magnesium alloy with cerium modified silane coatings
Zanotto, F., Grassi, V., Frignani, A., & Zucchi, F. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.013 · Cited by 77
Testing of General and Localized Corrosion of Magnesium Alloys: A Critical Review
GHALI, E. L., Dietzel, W., & Kainer, K. U. (2004) · Journal of Materials Engineering and Performance · doi:10.1361/10599490420665 · Cited by 77 · cited 4×
“Because of low density and particularly good mechanical properties, magnesium alloys are widely used as a construction material in the automotive and aerospace sectors [1,2].”
BackgroundMethodInfluentialAntoniac, I., Miculescu, F., Cotruț, C. M., Ficai, A., Rau, J. V., Grosu, E., Antoniac, A., Tecu, C., & Cristescu, I. (2020) · Materials · doi:10.3390/ma13020263 · Cited by 73
Singh, S. K., Singh, G., & Bala, N. (2020) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.106011 · Cited by 72 · cited 2×
“The addition of inorganic nanoparticles, such as hydroxyapatite (HA), titanium dioxide, and iron oxides, usually enhanced implant integration with host tissue, corrosion resistance, and has an antibacterial effect [27,34,35,40].”
BackgroundHeise, S., Wirth, T., Höhlinger, M., Torres, Y., Rodríguez-Ortiz, J. A., Wagener, V., Virtanen, S., & Boccaccini, A. R. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.03.050 · Cited by 71 · cited 1×
“[30] have shown that the addition of SiO2 particles to chitosan/BG coatings gives a topography favorable for the formation of hydroxyapatite when the coatings are in contact with SBF.”
BackgroundWei, Z., Tian, P., Liu, X., & Zhou, B. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33208 · Cited by 69 · cited 1×
“The most popular coatings are hydroxides-based coatings [6,7], metal oxide based coatings [8,9], silane sol-gel coatings [10–12], Ca-P coatings [13–15] and polymer coatings [16,17].”
BackgroundFrancis, A. A., Yang, Y., & Boccaccini, A. R. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.002 · Cited by 69 · cited 4×
“Band at ~1040 cm−1 and represent the C–O vibrations in the chitosan molecule [26,55,56].”
BackgroundInfluentialAlaei, M., Atapour, M., & Labbaf, S. (2020) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.105803 · Cited by 69 · cited 10×
“Chitosan/BG coatings reduce the corrosion rate of magnesium-based substrates in SBF [21,28,32,34].”
BackgroundInfluentialYadav, V. S., Sankar, M. R., & Pandey, L. M. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.05.005 · Cited by 64 · cited 1×
“They include bioactive glass (BG) [21,24,26,28,32,33,38,39], hydroxyapatite [27,29,34,35,40], carbon nanotubes [41], Fe3O4 nanoparticles [34,35], and mineralized bone allograft nanoparticles [42].”
BackgroundCui, L., Xu, J. L., Na, L. U., Zeng, R., Yu-hong, Z. O. U., Li, S., & Zhang, F. (2017) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(17)60126-2 · Cited by 59 · cited 1×
“Chitosan coatings can be deposited by dip coating [21–23], spin coating [3], layer–by–layer (LBL) coating (multilayer deposition) [24,25], chemical conversion [26], or aerosol deposition (AD) [27].”
BackgroundZhang, J., Wen, Z., Zhao, M., Li, G., & Dai, C. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.09.050 · Cited by 58 · cited 1×
“They include bioactive glass (BG) [21,24,26,28,32,33,38,39], hydroxyapatite [27,29,34,35,40], carbon nanotubes [41], Fe3O4 nanoparticles [34,35], and mineralized bone allograft nanoparticles [42].”
BackgroundHöhlinger, M., Heise, S., Wagener, V., Boccaccini, A. R., & Virtanen, S. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.02.049 · Cited by 53 · cited 9×
“Chitosan/BG coatings reduce the corrosion rate of magnesium-based substrates in SBF [21,28,32,34].”
BackgroundInfluentialYue, Y.-Y., Liu, Z., Wan, T., & Wang, P.-C. (2013) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2013.01.010 · Cited by 48
Lin, Y., Cai, S., Jiang, S., Xie, D., Ling, R., Sun, J.-Y., Wei, J., Shen, K., & Xu, G. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.11.007 · Cited by 46 · cited 1×
“The most popular coatings are hydroxides-based coatings [6,7], metal oxide based coatings [8,9], silane sol-gel coatings [10–12], Ca-P coatings [13–15] and polymer coatings [16,17].”
BackgroundWitecka, A., Valet, S., Basista, M., & Boccaccini, A. R. (2021) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2021.127232 · Cited by 46 · cited 1×
“Band at ~1040 cm−1 and represent the C–O vibrations in the chitosan molecule [26,55,56].”
BackgroundXPS and thermal studies of silver doped SiO2 matrices for plasmonic applications
Kiran, J. U., Roners, J. P., & Mathew, S. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.03.500 · Cited by 45 · cited 8×
“The peak at the binding energy 103.3 eV present in the Si2p spectrum is assigned to SiO2 [49,51].”
BackgroundInfluentialSingh, J., Chatha, S. S., & Singh, H. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.08.189 · Cited by 45 · cited 1×
“The beneficial effect of the addition of CaSiO3 on the corrosion resistance of titanium alloy (Ti6Al4V) was presented in the paper [57].”
BackgroundRahimi, M., Aghdam, R. M., Sohi, M. H., Rezayan, A. H., & Ettelaei, M. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126627 · Cited by 43 · cited 2×
“The band at 1560 cm−1 is assigned to –NH group with bending vibration, [42].”
BackgroundYao, W. H., Li, M., Zhang, M., Cui, R., Shi, J. X., & Ning, J. (2019) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2019.124394 · Cited by 40
Dalmoro, V., Azambuja, D. S., Alemán, C., & Armelin, E. A. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.10.013 · Cited by 37
Zhou, H., Li, J., Li, J., Ruan, Q., Jin, W., Yu, Z., Li, W., & Chu, P. K.-H. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126248 · Cited by 37 · cited 1×
“The corrosion rate of the coat d and unco ted sp cim ns was then de ermined fr m Equation (3) [53,54].”
BackgroundMa, J., Chen, C. Z., Wang, D. G., & Shi, J. Z. (2010) · Materials Science and Engineering C · doi:10.1016/j.msec.2010.04.005 · Cited by 36
Xu, R., Shen, Y., Zheng, J., Wen, Q., Li, Z., Yang, X., & Chu, P. K.-H. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.11.111 · Cited by 36 · cited 1×
“The most popular coatings are hydroxides-based coatings [6,7], metal oxide based coatings [8,9], silane sol-gel coatings [10–12], Ca-P coatings [13–15] and polymer coatings [16,17].”
BackgroundInfluence of proteins on the corrosion behavior of a chitosan-bioactive glass coated magnesium alloy
Höhlinger, M., Christa, D., Zimmermann, V., Heise, S., Boccaccini, A. R., & Virtanen, S. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.02.034 · Cited by 36 · cited 1×
“They include bioactive glass (BG) [21,24,26,28,32,33,38,39], hydroxyapatite [27,29,34,35,40], carbon nanotubes [41], Fe3O4 nanoparticles [34,35], and mineralized bone allograft nanoparticles [42].”
BackgroundFrancis, A. A., Abdel-Gawad, S. A., & Shoeib, M. A. (2021) · Journal of Coatings Technology and Research · doi:10.1007/s11998-021-00468-y · Cited by 34 · cited 1×
“Band at ~1040 cm−1 and represent the C–O vibrations in the chitosan molecule [26,55,56].”
BackgroundPozzo, L. D. Y., da Conceição, T. F., Spinelli, A., Scharnagl, N., & Pires, A. T. N. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.105328 · Cited by 32 · cited 8×
“Chitosan/BG coatings reduce the corrosion rate of magnesium-based substrates in SBF [21,28,32,34].”
BackgroundInfluentialSingh, S. K., Singh, G., & Bala, N. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101870 · Cited by 31 · cited 11×
“The addition of inorganic nanoparticles, such as hydroxyapatite (HA), titanium dioxide, and iron oxides, usually enhanced implant integration with host tissue, corrosion resistance, and has an antibacterial effect [27,34,35,40].”
BackgroundInfluentialLi, W., Wang, H., & Zhang, Y. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.12.005 · Cited by 30
Effect of Magnesium Oxide Nanoparticles on Water Glass Structure
Bobrowski, A., Kmita, A., Starowicz, M., Hutera, B., & Stypuła, B. (2012) · Archives of Foundry Engineering · doi:10.2478/v10266-012-0073-2 · Cited by 29
Self-citationFTIR SPECTROSCOPY OF WATER GLASS - THE BINDER MOULDING MODIFIED BY ZnO NANOPARTICLES
Bobrowski, A., Hutera, B., Kmita, A., Drożyński, D., & Starowicz, M. (2012) · University of Zagreb University Computing Centre (SRCE) · Cited by 22
Self-citationInfluence of Alkali Treatment on Anodized Titanium Alloys in Wollastonite Suspension
Kazek‐Kęsik, A., Leśniak, K., Zhidkov, I. S., Korotin, D. M., Kukharenko, A. I., Cholakh, S. O., Kalemba–Rec, I., Suchanek, K., Kurmaev, E. Z., & Simka, W. (2017) · Metals · doi:10.3390/met7090322 · Cited by 19
Study of the Morphology and Properties of Biocompatible Ca-P Coatings on Mg Alloy
Cesarz-Andraczke, K., Nowosielski, R., Basiaga, M., & Babilas, R. (2019) · Materials · doi:10.3390/ma13010002 · Cited by 18
Microstructural characteristics of chitosan deposited az91 magnesium alloy
Barani, B., Lakshminarayanan, A. K., & Subashini, R. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.05.115 · Cited by 16
Cited by
Research advances of magnesium and magnesium alloys worldwide in 2021
Song, J., Chen, J., Xiong, X., Peng, X., Chen, D., & Pan, F. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.04.001 · Cited by 536
“…of the simplest and most economical methods to improve the corrosion resistance of magnesium, coatings including organic coating (chitosan-based [281] ), inorganic coating (electrophoretic deposition film [282] , Ni coating [ 283 , 284 ]) and conversion coating (phosphate conversion coating…”
MethodMagnesium-based alloys with adapted interfaces for bone implants and tissue engineering
Antoniac, I., Mănescu, V., Antoniac, A., & Păltânea, G. (2023) · Regenerative Biomaterials · doi:10.1093/rb/rbad095 · Cited by 76
An overview of the recent developments in biodegradable Mg-Zn alloy
Sahu, M. R., & Yamamoto, A. (2025) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2025.01.011 · Cited by 72
Recent Progress in Surface Modification of Mg Alloys for Biodegradable Orthopedic Applications
Rahim, S. A., Joseph, M., Kumar, T. S. S., & Hanas, T. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.848980 · Cited by 64
Venkateswarlu, B., Sunil, B. R., & Kumar, R. S. (2023) · Materialia · doi:10.1016/j.mtla.2023.101680 · Cited by 53
Metadata
- Authors
- Kozina, I., Krawiec, H., Starowicz, M., & Kawalec, M.
- Affiliations
- AGH University of Krakow (PL)
- Corresponding author
- Krawiec, Halina
- Venue
- International Journal of Molecular Sciences
- Publisher
- MDPI AG
- Published
- 2021-08-02
- Volume
- 22
- Issue
- 15
- Pages
- 8301
- ISSN
- 1422-0067 (ISSN-L)
- PMC
- PMC8348728
- OpenAlex
- W3189317160
- Semantic Scholar
- 6874a97f97b949b1623f7f0898581b0794b93fe1
- Cited by
- 35
- References
- 55
- Citations by year
- 2026: 4 · 2025: 7 · 2024: 7 · 2023: 12 · 2022: 5
- FWCI
- 1.57
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- International Journal of Molecular Sciences (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Commission (H2020-MSCA-ITN-2017, grant agreement no. 764977 –mCBEEs (contract no. 27.27.170.70100))
- Topics
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- Mg-Zn alloys, chitosan coating, corrosion resistance, spin coating, Hank's solution, calcium phosphate coatings, calcium silicate formation, calcium phosphate formation, hydrogen evolution reaction, biodegradable coatings
- MeSH terms
- Alloys, Biochemical Phenomena, Corrosion, Magnesium, Surface Properties, Zinc, Coated Materials, Biocompatible, Chitosan
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.