Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues
Open accessThe DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index; 20 of the 37 sources its claims cite were checked for support.
Abstract
This paper presents an end-to-end case-based reasoning framework that detects and remedies data quality issues in IoT logs in near real time, even with only a handful of annotated fault instances.
Overview
CoChat Summary
TL;DR
The paper presents an end-to-end case-based reasoning framework for detecting and remedying data quality issues in Industrial IoT time-series logs, using expert-encoded vocabulary, case base, similarity measures, and adaptation rules. In a 500-case smart-factory case study, the approach detected almost no true DQI positives, with overall recall 0.38% and F1 0.75%, while also showing severe memory and runtime limitations.
Key findings
- The case study used a reduced 500-case base with 25 cases of each of three DQI types—missing sensor values, missing sensors, and time shifts—and 10-fold cross-validation. Overall accuracy was 64.21%, but average recall was 0.38% and average F1-score was 0.75%.
- For missing sensor values, precision was 62.50%, recall 1.15%, F1-score 2.25%, specificity 50.00%, and false positive rate 50.00%; 41 queries were aborted, and average calculation time per query was 21 min 46 s.
- For missing sensors, no true positives were detected: precision, recall, and F1-score were all 0.00, while accuracy was 95.00% and specificity 1.000; average calculation time per query was 12 s.
- For time shifts, no true positives were detected: precision, recall, and F1-score were all 0.00, while accuracy was 95.83% and specificity 0.9973; 116 queries were aborted, retrieval took over 10 days, average calculation time per query was 29 min 21 s, and memory use reached almost 400 GB.
Methods
- Design: a Temporal Case-Based Reasoning framework populating the four CBR knowledge containers, with a DataStream-format vocabulary, a fault-annotated case base, tailored similarity measures, and lightweight adaptation rules. Similarity measures included a weighted Dynamic Time Warping variant for missing sensor values, hierarchical list mapping for missing sensors, and increased timestamp weighting for time shifts.
- Data and sample: error-free sensor logs from an extended Fischertechnik Smart Factory in the IoT Lab Trier were used; a domain expert generated DQI-injected event logs for the three DQI types. The case study used a reduced, randomly chosen data set of 500 cases, containing 25 cases of each DQI type, implemented in the ProCAKE framework.
- Analysis: 10-fold cross-validation was performed for retrieval and classification using majority voting over the five most similar cases with a similarity threshold of 0.9. Confusion matrices and performance measures—precision, recall, F1-score, accuracy, specificity, and error rates—were computed; the further CBR phases were omitted in the case study.
Limitations
- Stated: the authors report only limited DQI identification, poor recall and F1-scores, zero true positives for missing sensors and time shifts, small numbers of faulty cases, heterogeneous DQI manifestations, unsuitable similarity measures, fragile expert-only similarity weights, non-scalable naïve retrieval, and failure of a one-size-fits-all similarity measure across DQI types.
- Stated: the approach showed severe technical limitations, including memory consumption exceeding 400 GB RAM, throttling and aborted queries, long runtimes, and unsuitability for edge devices or real-world real-time use.
- Evident from the text: the case study evaluates only retrieval and classification, not the full detection-handling-solving pipeline; the paper also reports inconsistent DQI prevalence figures (25 cases per DQI type versus 5% of 500 cases labeled with a DQI), and the missing-sensor-value confusion matrix implies very few actual negatives, complicating interpretation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Application domains of data quality in cyber-physical systems and IoT environments (based on Goknil et al. [7]).](https://figures.cochat.ai/paper-figures/09165b9a1ed846ce8e45df2c92e4855d/case-based-data-quality-management-for-iot-logs-a-case-study-focusing-on-figure-1.png)
![Figure 2 Illustration of the CBR cycle with the corresponding knowledge containers (based on Aamodt and Plaza [21]).](https://figures.cochat.ai/paper-figures/38ba0d13f4184e3fb7053d3a9f721415/case-based-data-quality-management-for-iot-logs-a-case-study-focusing-on-figure-2.png)
![Figure 3 The data quality management cycle according to Bertrand et al. [11].](https://figures.cochat.ai/paper-figures/7fc08a2ed02e47b38f9a295d6cd0f1bb/case-based-data-quality-management-for-iot-logs-a-case-study-focusing-on-figure-3.png)

![Figure 5 The Vocabulary for Representing an Event in the Data Stream Format As a Case (Adapted from and Extended Based On Schultheis et al. [49]).](https://figures.cochat.ai/paper-figures/8bdc1567597c44be90c0c909cb916ee5/case-based-data-quality-management-for-iot-logs-a-case-study-focusing-on-figure-5.png)
![Figure 6 The undesired mapping in the DQI of a missing sensor value (based on Schultheis et al. [49]).](https://figures.cochat.ai/paper-figures/cdabf75b8f984520925940a697f05445/case-based-data-quality-management-for-iot-logs-a-case-study-focusing-on-figure-6.png)




Verification
Claims the paper makes
14 Valid · 5 Not valid · 13 Not checked · 108 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Bertrand et al. [36] reviewed the IoT-BPM literature to describe the IoT DQIs and the event log DQIs encountered by previous research. The results indicate that the most often reported DQIs, i.e., noise, outliers, and missing data, correspond to the most often reported issues in IoT in general by Teh et al. [6].”
What the sources say
- Supportedcites [36] 36. Bertrand, Y.; Belle, R.V.; Weerdt, J.D.; Serral, E. Defining Data Quality Issues in Process Mining with IoT Data. In International Conference on Process Mining 2022 ; LNBIP; Springer: Berlin/Heidelberg, Germany, 2022; Voume 468, pp. 422-434. [CrossRef] source
Section 4.1 reports that noise, outliers, and missing data were the most frequently encountered IoT data quality issues in the reviewed process-mining literature. Section 5 says those issues are among the most cited error types in the broader IoT literature. The source does not claim that the three have the same frequency ranking in both literatures. (LLM, conf=0.90)
- Partly supportedcites [6] 6. Teh, H.Y.; Kempa-Liehr, A.W.; Wang, K.I.K. Sensor data quality: A systematic review. J. Big Data 2020 , 7 , 11. [CrossRef] sourceExperimental — accuracy not yet measured
Table 2 (section labelled “Symbol”; page unavailable) reports outliers in 32 publications and missing data in 16, making them the two most frequently addressed sensor-data errors. Noise appears in 8 publications, behind bias and drift at 12 each, so Teh et al. do not support calling all three the most often reported issues. The IoT-BPM findings attributed to Bertrand et al. are not the part this citation is offered to support. (LLM, conf=0.90)
hedgedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“which is known to suffer from many Data Quality Issues (DQIs), such as missing data due to faulty sensors or noise due to difficult environmental conditions [5-7].”
What the sources say
- Not checked — no full text of the sourcecites [5] 5. Karkouch, A.; Mousannif, H.; Al Moatassime, H.; Noel, T. Data Quality in Internet of Things: A state-of-the-art survey. J. Netw. Comput. Appl. 2016 , 73 , 57-81. [CrossRef] source
- Partly supportedcites [6] 6. Teh, H.Y.; Kempa-Liehr, A.W.; Wang, K.I.K. Sensor data quality: A systematic review. J. Big Data 2020 , 7 , 11. [CrossRef] sourceExperimental — accuracy not yet measured
The Introduction says IoT sensors are used in industry and lists several sensor-data errors. The Symbol section identifies missing data and noise as errors and says sensor-device outages can cause missing data; the Introduction says harsh outdoor conditions can affect sensor operation. The paper does not specifically say that difficult environmental conditions cause noise, so that causal example is not established. (LLM, conf=0.83)
- Partly supportedcites [7] 7. Goknil, A.; Nguyen, P.; Sen, S.; Politaki, D.; Niavis, H.; Pedersen, K.J.; Suyuthi, A.; Anand, A.; Ziegenbein, A. A Systematic Review of Data Quality in CPS and IoT for Industry 4.0. ACMComput. Surv. 2023 , 55 , 1-38. [CrossRef] sourceExperimental — accuracy not yet measured
The Introduction says CPS/IoT sensor measurements may be corrupted or missing, and Section 4.1 links missing values to sensor failures and identifies noise as a data-quality issue. The cited passages do not link noise specifically to difficult environmental conditions; the Introduction instead gives examples such as electromagnetic interference, packet loss, and signal-processing faults. (LLM, conf=0.86)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Every source the paper cites for this claim was checked and supports it.
In the paper
“The DataStream format [68] offers a flexible, structured solution for integrating IoT sensor data with process events across different contexts (single activity, group of activities, or trace), enabling joint analysis of process and IoT data.”
What the sources say
- Supportedcites [68] 68. Mangler, J.; Grüger, J.; Malburg, L.; Ehrendorfer, M.; Bertrand, Y.; Benzin, J.V.; Rinderle-Ma, S.; Serral Asensio, E.; Bergmann, R. DataStream XES Extension: Embedding IoT Sensor Data into Extensible Event Stream Logs. Future Internet 2023 , 15 , 109. [CrossRef] source
The Abstract says DataStream connects IoT data to process events while preserving context for analysis. Section 3.1 describes how the format structures sensor data for single-activity, group-of-activities, and trace contexts. Section 4.3 says this integration can provide a basis for joint analysis of process and IoT data; it does not claim that analysis tools already implement it. (LLM, conf=0.93)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Such pre-processing would make it impossible to recognize DQI-specific patterns, such as missing values [49].”
What the sources say
- Could not verifycites [49] 49. Schultheis, A.; Malburg, L.; Grüger, J.; Weich, J.; Bertrand, Y.; Bergmann, R.; Serral Asensio, E. Identifying Missing Sensor Values in IoT Time Series Data: A Weight-Based Extension of Similarity Measures for Smart Manufacturing. In International Conference on Case-Based Reasoning 2024 ; LNCS; Springer: Berlin/Heidelberg, Germany, 2024; Volume 14775, pp. 240-257. [CrossRef] sourceExperimental — accuracy not yet measured
Our copy of Schultheis et al. (2024) defines the DQI of missing sensor values (Sect. 3.1) and explains why established time series similarity measures fail to detect them (Sect. 3.2, Introduction), but no passage addresses pre-processing steps such as abstraction or removal of irrelevant data points destroying the recognizability of DQI-specific patterns. Searches for 'preprocessing/abstraction/removal of irrelevant data points', 'aggregation/cleaning destroys anomaly patterns' and 'irrelevant data' returned only the Sect. 3.1 survey sentence listing missing, incorrect, imprecise and irrelevant data (crediting Bose et al.) and a passing mention of cleaning methods — nothing stating the attributed point. The paper therefore neither states nor contradicts the claim; its account of why missing values are hard to recognize rests on similarity-measure insensitivity and value-change logging, not on pre-processing. (LLM, conf=0.68)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“For this type of DQI, this provides the advantage that cases in which values are recorded at different intervals are recognized as similar [49].”
What the sources say
- Partly supportedcites [49] 49. Schultheis, A.; Malburg, L.; Grüger, J.; Weich, J.; Bertrand, Y.; Bergmann, R.; Serral Asensio, E. Identifying Missing Sensor Values in IoT Time Series Data: A Weight-Based Extension of Similarity Measures for Smart Manufacturing. In International Conference on Case-Based Reasoning 2024 ; LNCS; Springer: Berlin/Heidelberg, Germany, 2024; Volume 14775, pp. 240-257. [CrossRef] sourceExperimental — accuracy not yet measured
Sect. 3.2 (Identification Problem of Missing Sensor Values) does state the mechanism the claim rests on: with DTW (Cat. 3) 'the different time points would hardly matter, and the two time series would be identified as similar', and Sect. 2.2 (Cat. 3: Dynamic Time Warping) confirms DTW can handle stretching/compression and series of differing lengths. However, the source presents this insensitivity to differing recording intervals as the reason the missing value 'would also go unnoticed' and concludes that 'none of the time series measures presented is therefore suitable' for this DQI type without added weights — so the citing sentence's framing of it as 'the advantage' for this type of DQI is not supported; the paper's claimed advantage of its weight-based extension is penalising outliers so missing values become visible, not interval handling. (LLM, conf=0.75)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
49 more claims
Create a free account to see all 140 claims and to verify the 4 references still open.
- It may state two separate claims as one. 53
- Probably not a substantial claim. 48
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 5.3. Discussion · p. 22
“only 5 % of the 500 cases are labeled with a DQI, yielding a 19:1 skew toward 'healthy' examples.”
§ 5.1. Setup · p. 20
“For the case study, a reduced, randomly chosen data set of 500 cases was used, containing 25 cases of each of the three respective DQIs.”
Citations
Cites
Identification of common molecular subsequences
Smith, T. F., & Waterman, M. S. (1981) · Journal of Molecular Biology · doi:10.1016/0022-2836(81)90087-5 · Cited by 9,940
Edge computing: Vision and challenges
Shi, W., Cao, J., Zhang, Q., Li, Y., & Xu, L. (2016) · IEEE Internet of Things Journal · doi:10.1109/jiot.2016.2579198 · Cited by 8,733 · cited 1×
“Another possibility is distributed CBR approaches [87], for which architectures such as edge–cloud continuums [88,89] can be used.”
Maintaining knowledge about temporal intervals
Allen, J. F. (1983) · Communications of the ACM · doi:10.1145/182.358434 · Cited by 7,593 · cited 1×
“…similarity-based retrieval techniques (e.g., MAC/FAC retrieval [77], index-based case base structures [78], and GPU-accelerated retrieval [79]) and leaner case representations (temporal abstraction [48,80] and constant-value pruning [47]) are mandatory before the approach can be used in practice.”
Dynamic Programming Algorithm Optimization for Spoken Word Recognition
Sakoe, H., & Chiba, S. (1978) · IEEE Transactions on Acoustics Speech and Signal Processing · doi:10.1109/tassp.1978.1163055 · Cited by 6,727 · cited 1×
“Therefore, we use the following measure for the time series. sim SensorStream ( q , c ) = sim weighted ( q , c ) with DTW as sim trad This is based on the DTW algorithm [54], which can identify stretching and compression in time series without a negative influence on the resulting similarity values.”
MissForest—Non-parametric missing value imputation for mixed-type data
Stekhoven, D. J., & Bühlmann, P. (2012) · Bioinformatics · doi:10.1093/bioinformatics/btr597 · Cited by 6,156 · cited 1×
“Depending on the cause, the failure must be addressed in different ways, such as manual recalibration or data imputation [71,72].”
Case-Based Reasoning: Foundational Issues, Methodological Variations, and System Approaches
Aamodt, A., & Plaza, E. (1994) · AI Communications · doi:10.3233/aic-1994-7104 · Cited by 5,624 · cited 4×
“An established AI method for reusing the collected experience is Case-Based Reasoning (CBR) [21,22].”
InfluentialLOF: identifying density-based local outliers
Breunig, M. M., Kriegel, H.-P., Ng, R. T., & Sander, J. (2000) · ACM SIGMOD Record · doi:10.1145/335191.335388 · Cited by 5,207
Beyond Accuracy: What Data Quality Means to Data Consumers
Wang, R. Y., & Strong, D. M. (1996) · Journal of Management Information Systems · doi:10.1080/07421222.1996.11518099 · Cited by 4,672 · cited 1×
“First is the Total Data Quality Management (TDQM) cycle, which comprises four main steps: defining, measuring, analyzing, and enhancing data [56,57].”
LOF: identifying density-based local outliers
Breunig, M. M., Kriegel, H.-P., Ng, R. T., & Sander, J. (2000) · Proceedings of the 2000 ACM SIGMOD international conference on Management of data · doi:10.1145/342009.335388 · Cited by 4,149 · cited 2×
“This step can use techniques for DQI detection mentioned earlier, such as local outlier factor [13] or isolation forests [12].”
Isolation-Based Anomaly Detection
Liu, F. T., Ting, K. M., & Zhou, Z.-H. (2012) · ACM Transactions on Knowledge Discovery from Data · doi:10.1145/2133360.2133363 · Cited by 2,063 · cited 2×
“Conventional approaches typically focus either on the detection of sensor DQIs, i.e., by using anomaly and outlier detection with isolation forests [12], local outlier factor [13], or Artificial Neural Networks (ANNs) [14]), or on handling and solving them, i.e., imputation methods such as spline…”
Research works printed but not linked: 17
- 19. Mitchell, T.M. Machine Learning ; McGraw-Hill: New York, NY, USA, 1997.
- 22. Bergmann, R. Experience Management: Foundations, Development Methodology, and Internet-Based Applications ; LNCS; Springer: Berlin/Heidelberg, Germany, 2003; Volume 2432. [CrossRef]
- 25. Richter, M.M. Knowledge Containers. In Readings in Case-Based Reasoning ; Morgan Kaufmann Publishers: Cambridge, MA, USA, 2003.
- 38. Verhulst, R. Evaluating Quality of Event Data within Event Logs: An Extensible Framework. Master's Thesis, Eindhoven University of Technology, Eindhoven, The Netherlands, 2016.
- 47. Malburg, L.; Schultheis, A.; Bergmann, R. Modeling and Using Complex IoT Time Series Data in Case-Based Reasoning: From Application Scenarios to Implementations. In ICCBR Workshops ; Springer: Cham, Switzerland, 2023; Volume 3438, pp. 81-96.
- 50. Stahl, A. Learning of Knowledge-Intensive Similarity Measures in Case-Based Reasoning. Ph.D. Thesis, University of Kaiserslautern, der Pfalz, Germany, 2004.
- 58. English, L.P. Improving Data Warehouse and Business Information Quality: Methods for Reducing Costs and Increasing Profits ; John Wiley & Sons, Inc.: Hoboken, NJ, USA, 1999.
- 65. Ehrlinger, L.; Wöß, W. Automated Data Quality Monitoring. In Proceedings of the 22nd ICIQ, Little Rock, AR, USA, 6-7 October 2017.
- 69. IEEE Std 1849-2016 ; IEEE Standard for eXtensible Event Stream (XES) for Achieving Interoperability in Event Logs and Event Streams. IEEE: New York, NY, USA, 2016. [CrossRef]
- 70. IEEE Std 1849-2023 (Revision of IEEE Std 1849-2016) ; IEEE Standard for eXtensible Event Stream (XES) for Achieving Interoperability in Event Logs and Event Streams. IEEE: New York, NY, USA, 2023. [CrossRef]
- 73. Levenshtein, V.I. Binary Codes Capable of Correcting Deletions, Insertions and Reversals. In Soviet Physics-Doklady ; Soviet Union: Moscow, Russia, 1966; Volume 10, pp. 707-710.
- 74. Bergmann, R.; Grumbach, L.; Malburg, L.; Zeyen, C. ProCAKE: A Process-Oriented Case-Based Reasoning Framework. In Proceedings of the 27th ICCBR Workshop, Otzenhausen, Germany, 8-12 September 2019; Volume 2567, pp. 156-161.
- 75. Mahalanobis, P.C. On the Generalized Distance in Statistics. Proc. Natl. Inst. Sci. India 1936 , 2 , 49-55, reprinted in Sankhy¯ a: Indian J. Stat. 2018 , 80-A (Suppl. 1), S1-S7.
- 82. Hoffmann, M. Hybrid AI for Process Management: Improving Similarity Assessment in Process-Oriented Case-Based Reasoning via Deep Learning. Ph.D. Thesis, Trier University, Trier, Germany, 2025.
- 84. Augusti, F.; Albertini, D.; Esmer, K.; Sannino, R.; Bernardini, A. IMAD-DS: A Dataset for Industrial Multi-Sensor Anomaly Detection Under Domain Shift Conditions. In Proceedings of the Detection and Classification of Acoustic Scenes and Events 2024, Tokyo, Japan, 23-25 October 2024. [CrossRef]
- 91. Smyth, B.; Keane, M.T. Remembering To Forget: A Competence-Preserving Case Deletion Policy for Case-Based Reasoning Systems. In Proceedings of the 14th IJCAI, Montreal, QC, Canada, 20-25 August 1995; Morgan Kaufmann: Cambridge, MA, USA, 1995; pp. 377-383.
- 92. Buduma, N. Fundamentals of Deep Learning: Designing Next-Generation Machine Intelligence Algorithms , 1st ed.; O'Reilly: Sebastopol, CA, USA, 2017. Disclaimer/Publisher's Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
Cited by
Explanation of Similarities in Temporal Case-Based Reasoning by Visualization
Schander, R., Schultheis, A., & Bergmann, R. (2026) · Lecture notes in computer science · doi:10.1007/978-3-032-33865-5_11 · Cited by 1
Self-citation
Metadata
- Authors
- Schultheis, A., Bertrand, Y., Grüger, J., Malburg, L., Bergmann, R., & Serral Asensio, E.
- Affiliations
- German Research Centre for Artificial Intelligence (DE)
- Ghent University (BE)
- Research Centre for Information Systems Engineering (LIRIS), KU Leuven, Warmoesberg 26, 1000 Brussels, Belgium
- Corresponding author
- Schultheis, Alexander
- ORCID
- Venue
- IoT
- Publisher
- MDPI AG
- Published
- 2025-10-23
- Volume
- 6
- Issue
- 4
- Pages
- 63
- ISSN
- 2624-831X (ISSN-L)
- OpenAlex
- W4415491316
- Cited by
- 2
- References
- 63
- Citations by year
- 2026: 2
- FWCI
- 0.55
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- IoT (publishedVersion, cc-by)
- Ghent University Academic Bibliography (Ghent University) (submittedVersion, cc-by)
- Lirias (KU Leuven) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Federal Ministry for Economic Affairs and Energy (01MD22002C)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Computer Science › Information Systems › Data Quality and Management
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Keywords
- case-based reasoning, data quality issues, Industrial Internet of Things, sensor data, data quality management, missing data imputation, data alignment, missing data, similarity measures, dynamic time warping, expert systems, smart manufacturing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues. https://app.cochat.ai/papers/10.3390/iot6040063
- The paper
- Schultheis, A., Bertrand, Y., Grüger, J., Malburg, L., Bergmann, R., & Serral Asensio, E. (2025). Case-Based Data Quality Management for IoT Logs: A Case Study Focusing on Detection of Data Quality Issues. IoT. https://doi.org/10.3390/iot6040063
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.