The DOI matches its Crossref record.
Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder
Open accessAbstract
This study aims to determine the effects of appropriate experimental parameters on the thermophysical properties of molten micro droplets, Sn-3Ag-0.5Cu solder balls with an average droplet diameter of 50 μm were prepared. The inkjet printing parameters of the molten micro droplets, such as the dot spacing, stage velocity and sample temperature, were optimized in the 1D and 2D printing of metallic microstructures. The impact and mergence of molten micro droplets were observed with a high-speed digital camera. The line width of each sample was then calculated using a formula over a temperature range of 30 to 70 °C. The results showed that a metallic line with a width of 55 μm can be successfully printed with dot spacing (50 μm) and the stage velocity (50 mm∙s−1) at the substrate temperature of 30 °C. The experimental results revealed that the height (from 0.63 to 0.58) and solidification contact angle (from 72° to 56°) of the metallic micro droplets decreased as the temperature of the sample increased from 30 to 70 °C. High-speed digital camera (HSDC) observations showed that the quality of the 3D micro patterns improved significantly when the droplets were deposited at 70 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Shahbazi, M.-A., Faghfouri, L., Ferreira, M. P. A., Figueiredo, P., Maleki, H., Sefat, F., Hirvonen, J., & Santos, H. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00283a · Cited by 523
Rani, M., Choudhary, P., Krishnan, V., & Zafar, S. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108768 · Cited by 521
High-entropy alloys by mechanical alloying: A review
Vaidya, M., Muralikrishna, G. M., & Murty, B. S. (2019) · Journal of Materials Research · doi:10.1557/jmr.2019.37 · Cited by 492
Boronic acids as building blocks for the construction of therapeutically useful bioconjugates
António, J. P. M., Russo, R., Carvalho, C. P., Cal, P. M. S. D., & Gois, P. M. P. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00184k · Cited by 303
Recent advances in PLGA-based biomaterials for bone tissue regeneration
Jin, S., Xia, X., Huang, J., Yuan, C., Zuo, Y., Li, Y., & Li, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.067 · Cited by 295
Metadata
- Authors
- Wang, C.-H., Tsai, H.-L., & Hwang, W.-S.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2016-12-22
- Volume
- 10
- Issue
- 1
- Pages
- 1
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2561630573
- Cited by
- 271
- References
- 0
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder. https://app.cochat.ai/papers/10.3390/ma10010001
- The paper
- Wang, C.-H., Tsai, H.-L., & Hwang, W.-S. (2016). Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder. Materials. https://doi.org/10.3390/ma10010001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.