The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder
Open accessAbstract
This study aims to determine the effects of appropriate experimental parameters on the thermophysical properties of molten micro droplets, Sn-3Ag-0.5Cu solder balls with an average droplet diameter of 50 μm were prepared. The inkjet printing parameters of the molten micro droplets, such as the dot spacing, stage velocity and sample temperature, were optimized in the 1D and 2D printing of metallic microstructures. The impact and mergence of molten micro droplets were observed with a high-speed digital camera. The line width of each sample was then calculated using a formula over a temperature range of 30 to 70 °C. The results showed that a metallic line with a width of 55 μm can be successfully printed with dot spacing (50 μm) and the stage velocity (50 mm∙s−1) at the substrate temperature of 30 °C. The experimental results revealed that the height (from 0.63 to 0.58) and solidification contact angle (from 72° to 56°) of the metallic micro droplets decreased as the temperature of the sample increased from 30 to 70 °C. High-speed digital camera (HSDC) observations showed that the quality of the 3D micro patterns improved significantly when the droplets were deposited at 70 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lead-free Solders in Microelectronics
Abtew, M., & Selvaduray, G. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00010-3 · Cited by 1,968
Ink-jet printed nanoparticle microelectromechanical systems
Fuller, S. B., Wilhelm, E. J., & Jacobson, J. M. (2002) · Journal of Microelectromechanical Systems · doi:10.1109/84.982863 · Cited by 594
Coalescence of Spreading Droplets on a Wettable Substrate
Ristenpart, W. D., McCalla, P. M., Roy, R. V., & Stone, H. A. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.064501 · Cited by 205
Visualization of drop-on-demand inkjet: Drop formation and deposition
Dong, H., Carr, W. W., & Morris, J. F. (2006) · Review of Scientific Instruments · doi:10.1063/1.2234853 · Cited by 162
Laser jetting of femto-liter metal droplets for high resolution 3D printed structures
Zenou, M., Sa'ar, A., & Kotler, Z. (2015) · Scientific Reports · doi:10.1038/srep17265 · Cited by 112
Investigation of molten metal droplet deposition and solidification for 3D printing techniques
Wang, C.-H., Tsai, H.-L., Wu, Y.-C., & Hwang, W. (2016) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/26/9/095012 · Cited by 76
Self-citationPrinting solder droplets for micro devices packages using pneumatic drop-on-demand (DOD) technique
Luo, J. F., Qi, L., Zhong, S.-Y., Zhou, J., & Li, H. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.05.007 · Cited by 66
Gale, B. K., Eddings, M. A., Sundberg, S. O., Hatch, A. C., Kim, J., & Ho, T. (2008) · Elsevier eBooks · doi:10.1016/b978-044452190-3.00011-2 · Cited by 28
Vincent, S., Bot, C. L., Sarret, F., Meillot, E., Caltagirone, J., & Bianchi, L. (2014) · Computers & Fluids · doi:10.1016/j.compfluid.2014.10.004 · Cited by 28
Thermal diffusivity of Sn–Ag–Cu-based, Pb-free, micro- and nano-sized solder balls
Kim, I., Kang, M. I., Kim, S. W., et al. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.10.022 · Cited by 5
Cited by
Shahbazi, M.-A., Faghfouri, L., Ferreira, M. P. A., Figueiredo, P., Maleki, H., Sefat, F., Hirvonen, J., & Santos, H. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00283a · Cited by 523
Rani, M., Choudhary, P., Krishnan, V., & Zafar, S. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108768 · Cited by 521
High-entropy alloys by mechanical alloying: A review
Vaidya, M., Muralikrishna, G. M., & Murty, B. S. (2019) · Journal of Materials Research · doi:10.1557/jmr.2019.37 · Cited by 492
Boronic acids as building blocks for the construction of therapeutically useful bioconjugates
António, J. P. M., Russo, R., Carvalho, C. P., Cal, P. M. S. D., & Gois, P. M. P. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00184k · Cited by 303
Recent advances in PLGA-based biomaterials for bone tissue regeneration
Jin, S., Xia, X., Huang, J., Yuan, C., Zuo, Y., Li, Y., & Li, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.067 · Cited by 295
Metadata
- Authors
- Wang, C.-H., Tsai, H.-L., & Hwang, W.-S.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2016-12-22
- Volume
- 10
- Issue
- 1
- Pages
- 1
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2561630573
- Cited by
- 271
- References
- 10
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.