The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effects of Processing Parameters on Surface Roughness of Additive Manufactured Ti-6Al-4V via Electron Beam Melting
Open accessAbstract
As one of the powder bed fusion additive manufacturing technologies, electron beam melting (EBM) is gaining more and more attention due to its near-net-shape production capacity with low residual stress and good mechanical properties. These characteristics also allow EBM built parts to be used as produced without post-processing. However, the as-built rough surface introduces a detrimental influence on the mechanical properties of metallic alloys. Thereafter, understanding the effects of processing parameters on the part’s surface roughness, in turn, becomes critical. This paper has focused on varying the processing parameters of two types of contouring scanning strategies namely, multispot and non-multispot, in EBM. The results suggest that the beam current and speed function are the most significant processing parameters for non-multispot contouring scanning strategy. While for multispot contouring scanning strategy, the number of spots, spot time, and spot overlap have greater effects than focus offset and beam current. The improved surface roughness has been obtained in both contouring scanning strategies. Furthermore, non-multispot contouring scanning strategy gives a lower surface roughness value and poorer geometrical accuracy than the multispot counterpart under the optimized conditions. These findings could be used as a guideline for selecting the contouring type used for specific industrial parts that are built using EBM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, P., Nai, M. L. S., Lu, S., Bai, J., Zhang, B., & Wei, J. (2017) · JOM · doi:10.1007/s11837-017-2610-5 · Cited by 37
Self-citation
Cited by
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Self-citationCorrosion of Additively Manufactured Alloys: A Review
Sander, G., Tan, J., Balan, P., Gharbi, O., Feenstra, D. R., Singer, L., Thomas, S., Kelly, R. G., Scully, J. R., & Birbilis, N. (2018) · Corrosion · doi:10.5006/2926 · Cited by 344
Jabłońska, M., Jurczak, W., Ozimina, D., & Adamiak, M. (2023) · Eksploatacja i Niezawodność – Maintenance and Reliability · doi:10.17531/ein.2023.1.18 · Cited by 9
Metadata
- Authors
- Wang, P., Sin, W., Nai, M., & Wei, J.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2017-09-22
- Volume
- 10
- Issue
- 10
- Pages
- 1121
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2759154716
- Cited by
- 164
- References
- 1
- FWCI
- 12.24
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of Processing Parameters on Surface Roughness of Additive Manufactured Ti-6Al-4V via Electron Beam Melting. https://app.cochat.ai/papers/10.3390/ma10101121
- The paper
- Wang, P., Sin, W., Nai, M., & Wei, J. (2017). Effects of Processing Parameters on Surface Roughness of Additive Manufactured Ti-6Al-4V via Electron Beam Melting. Materials. https://doi.org/10.3390/ma10101121
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.