Almond Shell as a Microporous Carbon Source for Sustainable Cathodes in Lithium–Sulfur Batteries
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
A microporous carbon derived from biomass (almond shells) and activated with phosphoric acid was analysed as a cathodic matrix in Li–S batteries. By studying the parameters of the carbonization process of this biomass residue, certain conditions were determined to obtain a high surface area of carbon (967 m2 g−1) and high porosity (0.49 cm3 g−1). This carbon was capable of accommodating up to 60% by weight of sulfur, infiltrated by the disulphide method. The C–S composite released an initial specific capacity of 915 mAh g−1 in the Li–S cell at a current density of 100 mA g−1 with a high retention capacity of 760 mAh g−1 after 100 cycles and a coulombic efficiency close to 100%. The good performance of the composite was also observed under higher current rates (up to 1000 mA g−1). The overall electrochemical behaviour of this microporous carbon acting as a sulfur host reinforces the possibility of using biomass residues as sustainable sources of materials for energy storage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515 · cited 1×
“These values are much higher than those found in current Li–ion batteries that dominate the market today [2].”
BackgroundMicroporous carbon nanosheets derived from corncobs for lithium–sulfur batteries
Guo, J., Zhang, J., Jiang, F., Zhao, S., Su, Q., & Du, G. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.077 · Cited by 175
Cited by
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Senthil, C., & Lee, C. W. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110464 · Cited by 377
Versatile carbon-based materials from biomass for advanced electrochemical energy storage systems
Zhu, Z., Men, Y., Zhang, W., Yang, W., Wang, F., Zhang, Y., Zhang, Y., Zeng, X., Xiao, J., Tang, C., et al. (2024) · eScience · doi:10.1016/j.esci.2024.100249 · Cited by 233
Recent advances in lithium-sulfur batteries using biomass-derived carbons as sulfur host
Benítez, A., Amaro-Gahete, J., Chien, Y.-C., Caballero, Á., Morales, J., & Brandell, D. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111783 · Cited by 177
“V = ( ρ S V/( ρ S V + 1) × 100, where V is the pore volume of the carbon matrix and ρ S is the density of sulfur (~2.07 g cm (cid:0) 3 ) [226,227].”
BackgroundInfluentialSelf-citationA Review of Non-Soil Biochar Applications
Bartoli, M., Giorcelli, M., Jagdale, P., Rovere, M., & Tagliaferro, A. (2020) · Materials · doi:10.3390/ma13020261 · Cited by 156
“[244] reported the use of microporous biochar as a cathodic material for a lithium–sulfur battery with a specific capacity of 915 mAh/g and a current density of 100 mA/g.”
Metadata
- Authors
- Benítez, A., González-Tejero, M., Caballero, Á., & Morales, J.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-08-14
- Volume
- 11
- Issue
- 8
- Pages
- 1428
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2885920126
- Cited by
- 60
- References
- 2
- FWCI
- 2.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Almond Shell as a Microporous Carbon Source for Sustainable Cathodes in Lithium–Sulfur Batteries. https://app.cochat.ai/papers/10.3390/ma11081428
- The paper
- Benítez, A., González-Tejero, M., Caballero, Á., & Morales, J. (2018). Almond Shell as a Microporous Carbon Source for Sustainable Cathodes in Lithium–Sulfur Batteries. Materials. https://doi.org/10.3390/ma11081428
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.