Rheological and Curing Behavior of Acrylate-Based Suspensions for the DLP 3D Printing of Complex Zirconia Parts
Open accessThe DOI matches its Crossref record.
Abstract
The present study demonstrates the possibility of fabricating zirconia parts with a complex shape and internal architecture using a low-cost stereolithography-based technique. One of the critical steps in ceramics stereolithography is the preparation of a photo-curable slurry with properties that fulfill specific requirements, such as having a low viscosity, high solids loading and appropriate curing characteristics. Slurries with different acrylic monomers and ceramic fillers were studied concerning their rheological and curing behavior. New formulations based on mono- and tri-functional acrylic monomers revealed the following excellent rheological properties: The viscosity of the mono-/tri-acrylate-based slurry with 75 wt.% of zirconia was 1.6 Pa·s at 30 s−1. Zirconia stabilized with 3 mol.% yttria was found to be more favorable than zirconia with 8 mol.% yttria for slurry preparation, because of its lower surface area and higher tapped density. It was shown that the cure depth of the suspensions was suitable for printing objects with a 50 µm layer thickness, good interlayers connection and surface finishing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
Zakeri, S., Vippola, M., & Levänen, E. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101177 · Cited by 496
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Photopolymerization-based additive manufacturing of ceramics: A systematic review
Rasaki, S. A., Xiong, D., Xiong, S., Su, F., Idrees, M., & Chen, Z. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0468-z · Cited by 297
Additive manufacturing of ceramics: Advances, challenges, and outlook
Dadkhah, M., Tulliani, J.-M., Saboori, A., & Iuliano, L. (2023) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2023.07.033 · Cited by 272
Camargo, I. L. D., Morais, M. M., Fortulan, C. A., & Branciforti, M. C. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.01.031 · Cited by 263
Metadata
- Authors
- Komissarenko, D. A., Sokolov, P. S., Evstigneeva, A. D., Shmeleva, I. A., & Dosovitsky, A. E.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-11-22
- Volume
- 11
- Issue
- 12
- Pages
- 2350
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2901272870
- Cited by
- 192
- References
- 0
- FWCI
- 6.70
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rheological and Curing Behavior of Acrylate-Based Suspensions for the DLP 3D Printing of Complex Zirconia Parts. https://app.cochat.ai/papers/10.3390/ma11122350
- The paper
- Komissarenko, D. A., Sokolov, P. S., Evstigneeva, A. D., Shmeleva, I. A., & Dosovitsky, A. E. (2018). Rheological and Curing Behavior of Acrylate-Based Suspensions for the DLP 3D Printing of Complex Zirconia Parts. Materials. https://doi.org/10.3390/ma11122350
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.