The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
On Residual Stress Development, Prevention, and Compensation in Metal Additive Manufacturing
Open accessAbstract
One of the most appealing qualities of additive manufacturing (AM) is the ability to produce complex geometries faster than most traditional methods. The trade-off for this advantage is that AM parts are extremely vulnerable to residual stresses (RSs), which may lead to geometrical distortions and quality inspection failures. Additionally, tensile RSs negatively impact the fatigue life and other mechanical performance characteristics of the parts in service. Therefore, in order for AM to cross the borders of prototyping toward a viable manufacturing process, the major challenge of RS development must be addressed. Different AM technologies contain many unique features and parameters, which influence the temperature gradients in the part and lead to development of RSs. The stresses formed in AM parts are typically observed to be compressive in the center of the part and tensile on the top layers. To mitigate these stresses, process parameters must be optimized, which requires exhaustive and costly experimentations. Alternative to experiments, holistic computational frameworks which can capture much of the physics while balancing computational costs are introduced for rapid and inexpensive investigation into development and prevention of RSs in AM. In this review, the focus is on metal additive manufacturing, referred to simply as “AM”, and, after a brief introduction to various AM technologies and thermoelastic mechanics, prior works on sources of RSs in AM are discussed. Furthermore, the state-of-the-art knowledge on RS measurement techniques, the influence of AM process parameters, current modeling approaches, and distortion prevention approaches are reported.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Improved Docking of Polypeptides with Glide
Tubert-Brohman, I., Sherman, W., Repasky, M., & Beuming, T. (2013) · Journal of Chemical Information and Modeling · doi:10.1021/ci400128m · Cited by 1,308
Additive manufacturing of titanium alloy for aircraft components
Uhlmann, E., Kersting, R., Klein, T. B., Cruz, M. F., & Borille, A. V. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.061 · Cited by 386 · cited 6×
“SE i ages of Ti–6 l–4 icrostructure for the reference structure (cast), and the SL process ithout heat treat ent, after a stress-relief heat treat ent, and after hot isostatic pressing ( IPing) [22].”
BackgroundMethodInfluential
Cited by
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Chen, S.-G., Gao, H.-J., Zhang, Y.-D., Wu, Q., Gao, Z.-H., & Zhou, X. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.02.054 · Cited by 274
Guo, C., Li, G., Li, S., Hu, X., Lu, H., Li, X., Xu, Z., Chen, Y., Li, Q., Lu, J., et al. (2023) · Nano Materials Science · doi:10.1016/j.nanoms.2022.08.001 · Cited by 273
Metadata
- Authors
- Carpenter, K., & Tabei, A.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-01-07
- Volume
- 13
- Issue
- 2
- Pages
- 255
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2999388800
- Cited by
- 161
- References
- 4
- FWCI
- 8.20
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On Residual Stress Development, Prevention, and Compensation in Metal Additive Manufacturing. https://app.cochat.ai/papers/10.3390/ma13020255
- The paper
- Carpenter, K., & Tabei, A. (2020). On Residual Stress Development, Prevention, and Compensation in Metal Additive Manufacturing. Materials. https://doi.org/10.3390/ma13020255
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.