The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Waste Rubber Recycling: A Review on the Evolution and Properties of Thermoplastic Elastomers
Open accessAbstract
Currently, plastics and rubbers are broadly being used to produce a wide range of products for several applications like automotive, building and construction, material handling, packaging, toys, etc. However, their waste (materials after their end of life) do not degrade and remain for a long period of time in the environment. The increase of polymeric waste materials’ generation (plastics and rubbers) in the world led to the need to develop suitable methods to reuse these waste materials and decrease their negative effects by simple disposal into the environment. Combustion and landfilling as traditional methods of polymer waste elimination have several disadvantages such as the formation of dust, fumes, and toxic gases in the air, as well as pollution of underground water resources. From the point of energy consumption and environmental issues, polymer recycling is the most efficient way to manage these waste materials. In the case of rubber recycling, the waste rubber can go through size reduction, and the resulting powders can be melt blended with thermoplastic resins to produce thermoplastic elastomer (TPE) compounds. TPE are multi-functional polymeric materials combining the processability of thermoplastics and the elasticity of rubbers. However, these materials show poor mechanical performance as a result of the incompatibility and immiscibility of most polymer blends. Therefore, the main problem associated with TPE production from recycled materials via melt blending is the low affinity and interaction between the thermoplastic matrix and the crosslinked rubber. This leads to phase separation and weak adhesion between both phases. In this review, the latest developments related to recycled rubbers in TPE are presented, as well as the different compatibilisation methods used to improve the adhesion between waste rubbers and thermoplastic resins. Finally, a conclusion on the current situation is provided with openings for future works.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Estimation of the surface free energy of polymers
Owens, D. K., & Wendt, R. C. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070130815 · Cited by 9,476
Specific surface area of carbon nanotubes and bundles of carbon nanotubes
Peigney, A., Laurent, C., Flahaut, E., Bacsa, R. R., & Rousset, A. (2001) · Carbon · doi:10.1016/s0008-6223(00)00155-x · Cited by 2,040
Polyurethane types, synthesis and applications – a review
Akindoyo, J. O., Beg, M. D. H., Ghazali, S., Islam, M. R., Jeyaratnam, N., & Yuvaraj, A. R. (2016) · RSC Advances · doi:10.1039/c6ra14525f · Cited by 1,831
Recycling of plastic solid waste: A state of art review and future applications
Singh, N., Hui, D., Singh, R., Ahuja, I. P. S., Feo, L., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.013 · Cited by 1,211
Strategies for compatibilization of polymer blends
Koning, C. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00054-3 · Cited by 881
Reclamation and recycling of waste rubber
Adhikari, B. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00020-4 · Cited by 816
The chemistry of polymer-clay hybrids
Okada, A., & Usuki, A. (1995) · Materials Science and Engineering: C · doi:10.1016/0928-4931(95)00110-7 · Cited by 687
Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends
Taguet, A., Cassagnau, P., & Lopez-Cuesta, J.-M. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.002 · Cited by 572
Progress in used tyres management in the European Union: A review
Sienkiewicz, M., Kucinska-Lipka, J., Janik, H., & Balas, A. (2012) · Waste Management · doi:10.1016/j.wasman.2012.05.010 · Cited by 559
Waste tire rubber in polymer blends: A review on the evolution, properties and future
Ramarad, S., Khalid, M., Ratnam, C. T., Chuah, A. L., & Rashmi, W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.02.004 · Cited by 527
Mechanical recycling: Compatibilization of mixed thermoplastic wastes
Maris, J., Bourdon, S., Brossard, J.-M., Cauret, L., Fontaine, L., & Montembault, V. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.11.001 · Cited by 404
Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers
Karger-Kocsis, J., Mészáros, L., & Bárány, T. (2013) · Journal of Materials Science · doi:10.1007/s10853-012-6564-2 · Cited by 376
Favis, B. D., & Chalifoux, J. P. (1987) · Polymer Engineering & Science · doi:10.1002/pen.760272105 · Cited by 357
Ning, N., Li, S., Wu, H., Tian, H., Yao, P., HU, G.-H., Tian, M., & Zhang, L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.11.003 · Cited by 251
Salzano de Luna, M., & Filippone, G. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.02.023 · Cited by 239
İlkılıç, C., & Aydın, H. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.01.009 · Cited by 238
Resource recovery from used rubber tires
Amari, T., Themelis, N. J., & Wernick, I. K. (1999) · Resources Policy · doi:10.1016/s0301-4207(99)00025-2 · Cited by 228
The status of recycling of waste rubber
Fang, Y., Zhan, M., & Wang, Y. (2001) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(00)00052-2 · Cited by 215
Composites with recycled rubber aggregates: Properties and opportunities in construction
Medina, N. F., Garcia, R., Hajirasouliha, I., Pilakoutas, K., Guadagnini, M., & Raffoul, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.069 · Cited by 185
LDPE-based thermoplastic elastomers containing ground tire rubber with and without dynamic curing
Kumar, C. R., Fuhrmann, I., & Karger-Kocsis, J. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00007-1 · Cited by 172
Scrap tires to crumb rubber: feasibility analysis for processing facilities
Sunthonpagasit, N., & Duffey, M. R. (2003) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(03)00073-9 · Cited by 155
Kinetically Trapped Co-continuous Polymer Morphologies through Intraphase Gelation of Nanoparticles
Li, L., Miesch, C., Sudeep, P. K., Balazs, A. C., Emrick, T. S., Russell, T. P., & Hayward, R. C. (2011) · Nano Letters · doi:10.1021/nl200366z · Cited by 126
Recycling technology of tire rubber
Fukumori, K. (2002) · JSAE Review · doi:10.1016/s0389-4304(02)00173-x · Cited by 113
Ground Rubber Tire / Thermoplastic Composites: Effect of Different Ground Rubber Tires
Rajalingam, P., Sharpe, J., & Baker, W. E. (1993) · Rubber Chemistry and Technology · doi:10.5254/1.3538337 · Cited by 113
Huang, S., Bai, L., Trifkovic, M., Cheng, X., & Macosko, C. W. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00212 · Cited by 112
Thermoplastic olefin/clay nanocomposites: Morphology and mechanical properties
Mehta, S., Mirabella, F. M., Rufener, K., & Bafna, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.13693 · Cited by 111
Polymer alloys and blends: Recent advances
Favis, B. D. (1991) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450690303 · Cited by 107
The use of cryogenically ground rubber tires as a filler in polyolefin blends
Oliphant, K., & Baker, W. E. (1993) · Polymer Engineering and Science · doi:10.1002/pen.760330307 · Cited by 99
Effect of chemically modified waste rubber powder as a filler in natural rubber vulcanizates
Yehia, A. A., Mull, M. A., Ismail, M. N., Hefny, Y. A., & Abdel‐Bary, E. M. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20349 · Cited by 93
Catalytic conversion of waste tyres into valuable hydrocarbons
Shah, J., Jan, M. R., & Mabood, F. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-007-0062-7 · Cited by 75
Formela, K., Korol, J., & Saeb, M. R. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.01.003 · Cited by 55
Wang, Y.-H., Chen, Y., & Rodrigue, D. (2018) · International Polymer Processing · doi:10.3139/217.3544 · Cited by 52
Self-citationSripornsawat, B., Saiwari, S., Pichaiyut, S., & Nakason, C. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.10.031 · Cited by 48
Kakroodi, A. R., & Rodrigue, D. (2013) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/1743289812y.0000000042 · Cited by 47
Self-citationAmani, M., Sharif, M., Kashkooli, A., Rahnama, N., & Fazli, A. (2015) · RSC Advances · doi:10.1039/c5ra16975e · Cited by 40
Self-citationMicrohardness studies of PMMA/natural rubber blends
Mina, M. F., Ania, F., Calleja, F. J. B., & ASANO, T. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13246 · Cited by 38
Application of nanomaterials in alkali-activated materials
Yu, Q. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102641-0.00005-0 · Cited by 29
Lopattananon, N., Tanglakwaraskul, S., Kaesaman, A., Seadan, M., & Sakai, T. (2014) · International Polymer Processing · doi:10.3139/217.2935 · Cited by 17
Cited by
Plastic recycling: A panacea or environmental pollution problem
Singh, N., & Walker, T. R. (2024) · npj Materials Sustainability · doi:10.1038/s44296-024-00024-w · Cited by 314
Evaluation of rubber powder waste as reinforcement of the polyurethane derived from castor oil
Silva, N. G. S., Cortat, L. I. C. O., Orlando, D., & Mulinari, D. R. (2020) · Waste Management · doi:10.1016/j.wasman.2020.07.032 · Cited by 66
Metadata
- Authors
- Fazli, A., & Rodrigue, D.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-02-08
- Volume
- 13
- Issue
- 3
- Pages
- 782
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W3005034901
- Cited by
- 256
- References
- 38
- FWCI
- 12.23
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.