CoChat
Sign Up
Cited by 8Concrete and Cement Materials ResearchRecycling and utilization of industrial and municipal waste in materials productionMaterials Engineering and Processing

The DOI matches its Crossref record; the references it cites are not checked yet.

Mechanical Properties and Microstructure of Environmentally Friendly Foam Concrete with Fly Ash Modified with Micro- and Nano-SiO2

Open access
Beskopylny, Alexey N., Stel’makh, Sergey A., Shcherban’, Evgenii M., Shakhalieva, Diana M., Chernil’nik, Andrei, Shcherban’, Natal’ya, Vyalikov, Ivan, Budovskiy, Aleksandr·2026·Materials
DOI 10.3390/ma19040814PMC PMC12941514
Open this paper in CoChat — free accountOpen PDF

Abstract

Currently, foam concrete is a prevalent energy-efficient building material, which is applicable for multiple purposes in a wide variety of buildings and structures. Improving the environmental performance of foam concrete and reducing its production costs through the use of industrial waste is a relevant and promising area. The goal of this study is to create innovative foam concrete (FC) mixtures using industrial waste, focusing on their environmentally friendly and energy-efficient properties for structural and thermal insulation purposes. The production of FC involved industrial waste products like fly ash (FA) and microsilica (MS). Nanosilica (NS) was used as an additional modifying additive. The study experimentally investigated the impact of the proposed formulation and process solutions on FC’s density, compressive strength (CS), and thermal conductivity (TC). The most effective FC modification parameters were identified for FA, MS, and NS. The best combination of 15% FA, 6% MS, and 0.4% NS produces environmentally friendly FC with improved properties: a density of 1142 kg/m3 and a TC of 0.268 W/m×°C, which are 3.8% and 15.2% lower than the control composition, respectively, and a CS of 15.1 MPa, which is 46.6% higher than the control value. Scanning Electron Microscopy (SEM) analysis validates that incorporating pozzolanic additives FA, MS, and NS into the FC composition fosters the development of more robust interpore partitions. This is due to the generation of a significant quantity of supplementary calcium hydrosilicates and a more homogenous pore structure. The structural quality factor of FC with 15% FA, 6% MS, and 0.4% NS increases to 52.4%. The structural and thermal insulation of FCs developed in this study are environmentally friendly building materials with reduced environmental impact and improved performance properties.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma19040814

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

The citation lists haven’t been fetched yet

References 56 · Cited by 8

Research works printed but not linked: 67

  1. Mezhidov, 2024, Application of ash and slag waste from coal combustion in the construction of the earth bed of roads, Constr. Mater. Prod., 7, 3
  2. Tiraturyan, 2025, Analysis of Deformation Energy Dissipation in Reinforced-Layer Pavement, Adv. Eng. Res. (Rostov—Don), 25, 324, 10.23947/2687-1653-2025-25-4-2184 · DOI
  3. Kara De Maeijer, P. (2025). Innovative Solutions for Concrete Applications. Infrastructures, 10. · DOI
  4. Tran, C.N.N., Illankoon, I.M.C.S., and Tam, V.W.Y. (2025). Decoding Concrete’s Environmental Impact: A Path Toward Sustainable Construction. Buildings, 15. · DOI
  5. Puzatova, 2024, Study of Structural Defects Evolution in Fine-Grained Concrete Using Computed Tomography Methods, Adv. Eng. Res. (Rostov—Don), 24, 227, 10.23947/2687-1653-2024-24-3-227-237 · DOI
  6. Akbulut, Z.F., Yavuz, D., Tawfik, T.A., Smarzewski, P., and Guler, S. (2024). Examining the Workability, Mechanical, and Thermal Characteristics of Eco-Friendly, Structural Self-Compacting Lightweight Concrete Enhanced with Fly Ash and Silica Fume. Materials, 17. · DOI
  7. Zhangabay, 2024, Analysis of the effect of porosity on thermal conductivity with consideration of the internal structure of arbolite, Constr. Mater. Prod., 7, 4
  8. Klyuev, 2025, Finite Element Design and Analysis of Sustainable Mono-Reinforced and Hybrid-Reinforced Fibergeopolymers, Adv. Eng. Res. (Rostov—Don), 25, 171, 10.23947/2687-1653-2025-25-3-171-185 · DOI
  9. Shill, S.K., Garcez, E.O., Al-Deen, S., and Subhani, M. (2024). Influence of Foam Content and Concentration on the Physical and Mechanical Properties of Foam Concrete. Appl. Sci., 14. · DOI
  10. Kumar, R., Srivastava, A., and Lakhani, R. (2022). Industrial Wastes-Cum-Strength Enhancing Additives Incorporated Lightweight Aggregate Concrete (LWAC) for Energy Efficient Building: A Comprehensive Review. Sustainability, 14. · DOI
  11. Derkach, 2025, Assessment of the Compressive Strength of Concrete in a Structure in Cases of Doubt as to its Compliance with the Established Requirements, Mod. Trends Constr. Urban Territ. Plan., 4, 104
  12. Nassiri, S., Butt, A.A., Zarei, A., Roy, S., Filani, I., Pandit, G.A., Mateos, A., Haider, M.M., and Harvey, J.T. (2025). Opportunities for Supplementary Cementitious Materials from Natural Sources and Industrial Byproducts: Literature Insights and Supply Assessment. Buildings, 15. · DOI
  13. Ahmed, M., Mim, N.J., Biswas, W., Shaikh, F., Zhang, X., and Patel, V.I. (2025). Effects of Partial Replacement of Cement with Fly Ash on the Mechanical Properties of Fiber-Reinforced Rubberized Concrete Containing Waste Tyre Rubber and Macro-Synthetic Fibers. Buildings, 15. · DOI
  14. Guo, Y., Xu, C., Hu, Z., Wang, L., Yue, G., Zheng, S., Li, Q., and Wang, P. (2022). Study on the Performance of Foam Concrete Prepared from Decarburized Fly Ash. Appl. Sci., 12. · DOI
  15. Xian, G., Liu, Z., Wang, Z., and Zhou, X. (2022). Study on the Performance and Mechanisms of High-Performance Foamed Concrete. Materials, 15. · DOI
  16. Hashemmoniri, 2023, Optimization of lightweight foamed concrete using fly ash based on mechanical properties, Innov. Infrastruct. Solut., 8, 59, 10.1007/s41062-022-01016-2 · DOI
  17. Siva, 2025, Effectiveness of large-volume Class-F fly ash as a replacement for sand in foam concrete using an environment-friendly foaming agent, J. Mater. Cycles Waste Manag., 27, 1339, 10.1007/s10163-025-02178-8 · DOI
  18. Zhang, D., Ding, S., Ma, Y., and Yang, Q. (2022). Preparation and Properties of Foam Concrete Incorporating Fly Ash. Materials, 15. · DOI
  19. Bat-Erdene, P.-E., and Pareek, S. (2022). Experimental Study on the Development of Fly Ash Foam Concrete Containing Phase Change Materials (PCMs). Materials, 15. · DOI
  20. Shilar, 2026, Valorization of agricultural and industrial wastes in geopolymer foam concrete, a ternary binder approach using corncob ash, red mud, and fly ash, Case Stud. Constr. Mater., 24, e05716
  21. Du, 2025, Foam concrete with untreated phosphogypsum and fly ash: Strength and microstructure, Emerg. Mater. Res., 14, 341
  22. Zhang, 2026, A new insight into moisture transport in foamed concrete: Coupled effects of density and fly ash, Constr. Build. Mater., 506, 144925, 10.1016/j.conbuildmat.2025.144925 · DOI
  23. Beskopylny, A.N., Shcherban’, E.M., Stel’makh, S.A., Mailyan, L.R., Meskhi, B., Evtushenko, A., El’shaeva, D., and Chernil’nik, A. (2023). Improving the Physical and Mechanical Characteristics of Modified Aerated Concrete by Reinforcing with Plant Fibers. Fibers, 11. · DOI
  24. Beskopylny, A.N., Shcherban’, E.M., Stel’makh, S.A., Mailyan, L.R., Meskhi, B., Varavka, V., Chernil’nik, A., and Pogrebnyak, A. (2023). Improved Fly Ash Based Structural Foam Concrete with Polypropylene Fiber. J. Compos. Sci., 7. · DOI
  25. Faraji, 2025, A green approach to construction: Fly ash-based one-part geopolymer foam concrete reinforced with waste concrete powder and polypropylene fibers, Constr. Build. Mater., 494, 143429, 10.1016/j.conbuildmat.2025.143429 · DOI
  26. Boddepalli, 2024, Synergistic effect of fly ash and polyvinyl alcohol fibers in improving stability, rheology, and mechanical properties of 3D printable foam concrete, Constr. Build. Mater., 429, 136464, 10.1016/j.conbuildmat.2024.136464 · DOI
  27. Khan, 2025, Exploring the synergy between aluminum powder and silica fume in enhancing lightweight concrete characteristics, Sci. Rep., 15, 42358, 10.1038/s41598-025-26349-7 · DOI
  28. Banaei, 2025, Mechanical and Vibration Properties of Self-compacting Rubberized Concrete Beams with Silica Fume Enhancement, Iran. J. Sci. Technol. Trans. Civ. Eng., 49, 3729, 10.1007/s40996-024-01695-0 · DOI
  29. Mailyan, 2024, Structure and Properties of Variatropic Concrete Combined Modified with Nano- and Micro-silica, Constr. Mater. Prod., 7, 3
  30. Suryanita, 2022, The effect of silica fume admixture on the compressive strength of the cellular lightweight concrete, Results Eng., 14, 100445, 10.1016/j.rineng.2022.100445 · DOI
  31. Wang, 2020, Investigation of silica fume as foam cell stabilizer for foamed concrete, Constr. Build. Mater., 237, 117514, 10.1016/j.conbuildmat.2019.117514 · DOI
  32. Bai, 2023, Preparation of nano-carbon black and silica fume modified foam concrete: Compressive strength, pore structure and electromagnetic property, Constr. Build. Mater., 369, 130553, 10.1016/j.conbuildmat.2023.130553 · DOI
  33. Toklu, 2022, Investigation of the effect of silica fume and synthetic foam additive on cell structure in ultra-low density foam concrete, Case Stud. Constr. Mater., 16, e01062
  34. Gencel, 2022, Basalt fiber-reinforced foam concrete containing silica fume: An experimental study, Constr. Build. Mater., 326, 126861, 10.1016/j.conbuildmat.2022.126861 · DOI
  35. Liu, 2023, Unveiling pore formation and its influence on micromechanical property and stress distribution of 3D printed foam concrete modified with hydroxypropyl methylcellulose and silica fume, Addit. Manuf., 71, 103606
  36. Liu, 2021, Influence of hydroxypropyl methylcellulose and silica fume on stability, rheological properties, and printability of 3D printing foam concrete, Cem. Concr. Compos., 122, 104158, 10.1016/j.cemconcomp.2021.104158 · DOI
  37. Koksal, 2020, Influence of expanded vermiculite powder and silica fume on properties of foam concretes, Constr. Build. Mater., 257, 119547, 10.1016/j.conbuildmat.2020.119547 · DOI
  38. Özkılıç, Y.O., Beskopylny, A.N., Aksoylu, C., Stel’makh, S.A., Shcherban’, E.M., Madenci, E., Shakhalieva, D.M., Chernil’nik, A., and Kosykh, A. (2025). Highly Effective Injection Composites with Fly Ash and Microsilica for Soil Stabilization. J. Compos. Sci., 9. · DOI
  39. Li, H., Zhao, Y., Zhao, Y., Zhang, M., Niu, Y., and Cao, X. (2025). Advances in the Mechanism and Application of Nanoparticles in Concrete Property Modification. Inorganics, 13. · DOI
  40. Xing, T., Zhang, S., and Guan, L. (2024). Insight into the Mechanical Properties and Microstructure of Recycled Aggregate Concrete Containing Carbon Fibers and Nano-SiO2. Materials, 17. · DOI
  41. Majeed, 2024, Development of ultra-lightweight foamed concrete modified with silicon dioxide (SiO2) nanoparticles: Appraisal of transport, mechanical, thermal, and microstructural properties, J. Mater. Res. Technol., 30, 3308, 10.1016/j.jmrt.2024.01.282 · DOI · Paper page
  42. Wan, L., Zhao, Y., Yu, M., Tian, Y., and Wang, Y. (2024). Durability and Mechanical Properties of Nano-SiO2 and Polyvinyl Alcohol Fiber-Reinforced Cementitious Composites Subjected to Saline Freeze–Thaw Cycles. Materials, 17. · DOI
  43. Qu, 2025, Effect of SiO2 aerogel and perlite on properties of foamed concrete, Sci. Rep., 15, 10945, 10.1038/s41598-025-96026-2 · DOI
  44. Zhang, 2024, Ultra-stable foam enabled by nano silica engineering for foam concrete improvement, Cem. Concr. Compos., 150, 105575, 10.1016/j.cemconcomp.2024.105575 · DOI
  45. Wang, Q., Bu, Y., and Lin, J. (2025). Research on the Application of Polymers and Nanoparticles in Foamed Cement. Springer Series in Geomechanics and Geoengineering ((SSGG)), Springer. · DOI
  46. Luo, J., Wang, S., Quan, X., Xu, J., Li, J., Liu, K., Xu, F., and Hong, Z. (2023). Nano-SiO2 Recycled Concrete Anti-Sulfate Performance and Damage Mechanism Research. Buildings, 13. · DOI
  47. Guo, 2024, Mechanical reinforcement mechanism of nano-SiO2 in grouted consolidation bodies, Appl. Geophys., 21, 1
  48. Zhang, W., Yang, G., Yun, W., Li, J., Xie, J., Wu, W., and Deng, Z. (2025). Combined Impact of Nano-SiO2 and Superabsorbent Polymers on Early-Age Concrete Engineering Properties for Water-Related Structures. Buildings, 15. · DOI
  49. López-Perales, J.F., Alonso-Alonso, M.C., Vázquez-Rodríguez, F.J., Guzmán-Hernández, A.M., Gómez-Zamorano, L.Y., Rodríguez-Castellanos, E.A., and Puente-Ornelas, R. (2024). Geothermal Nano-SiO2 Waste as a Supplementary Cementitious Material for Concrete Exposed at High Critical Temperatures. Materials, 17. · DOI
  50. Beskopylny, A.N., Stel’makh, S.A., Shcherban’, E.M., Mailyan, L.R., Meskhi, B., Varavka, V., Beskopylny, N., and El’shaeva, D. (2022). A Study on the Cement Gel Formation Process during the Creation of Nanomodified High-Performance Concrete Based on Nanosilica. Gels, 8. · DOI
  51. Afsoosbiria, H., and Machowska, A. (2025). Development of Sustainable Concrete Using By-Products as a Green Material, and Potential Solutions for Sustainability in Mass Concrete Construction—Comprehensive Review. Sustainability, 17. · DOI
  52. Zeng, P., Abbas, M.A.A.M., Ran, X., and Li, P. (2025). Impermeability, Strength and Microstructure of Concrete Modified by Nano-Silica and Expansive Agent. J. Compos. Sci., 9. · DOI
  53. Yang, Q., Yang, Q., Peng, X., Xia, K., and Xu, B. (2025). A Review of the Effects of Nanomaterials on the Properties of Concrete. Buildings, 15. · DOI
  54. Meskhi, B., Beskopylny, A.N., Stel’makh, S.A., Shcherban’, E.M., Mailyan, L.R., Beskopylny, N., Chernil’nik, A., and El’shaeva, D. (2022). Insulation Foam Concrete Nanomodified with Microsilica and Reinforced with Polypropylene Fiber for the Improvement of Characteristics. Polymers, 14. · DOI
  55. Mansour, 2025, Developing and Testing Eco-Friendly Lightweight Foam Concrete with Fly Ash, Proceedings of the ICSDI 2024, Volume 558, 287
  56. Hatungimana, 2019, Effect of fly ash and silica fume on hardened properties of foam concrete, Constr. Build. Mater., 194, 1
  57. Sun, Y., Jia, H., Wang, J., Ding, Y., Guan, Y., Lei, D., and Li, Y. (2025). Calculation Model for the Degree of Hydration and Strength Prediction in Basalt Fiber-Reinforced Lightweight Aggregate Concrete. Buildings, 15. · DOI
  58. Arunachalam, K.P., Avudaiappan, S., Flores, E.I.S., and Parra, P.F. (2023). Experimental Study on the Mechanical Properties and Microstructures of Cenosphere Concrete. Materials, 16. · DOI
  59. Majhi, 2021, Performance of structural lightweight concrete produced by utilizing high volume of fly ash cenosphere and sintered fly ash aggregate with silica fume, Clean. Eng. Technol., 3, 100121, 10.1016/j.clet.2021.100121 · DOI
  60. Mazloom, 2021, Effect of nano and micro SiO2 on brittleness and fracture parameters of self-compacting lightweight concrete, Constr. Build. Mater., 299, 124354, 10.1016/j.conbuildmat.2021.124354 · DOI
  61. Wang, 2018, Effect of nano-SiO2 on strength, shrinkage and cracking sensitivity of lightweight aggregate concrete, Constr. Build. Mater., 175, 115, 10.1016/j.conbuildmat.2018.04.113 · DOI
  62. Jia, 2025, Design and thermal insulation simulation of nano-SiO2 foam concrete and vacuum insulation panel system for building exterior wall insulation, Energy, 330, 136833, 10.1016/j.energy.2025.136833 · DOI
  63. Wu, C.-R., Xiao, Z.-P., Wei, J.-J., Kou, S.-C., and Tang, M.-X. (2025). Early Hydration Behaviours and Kinetics of Portland Cement Composites Incorporating Low-Calcium Circulating Fluidized Bed Fly Ash. J. Compos. Sci., 9. · DOI
  64. Si, W., Hopkins, B., Khan, M., and McNally, C. (2025). Towards Sustainable Mortar: Optimising Sika-Fibre Dosage in Ground Granulated Blast Furnace Slag (GGBS) and Silica Fume Blends for 3D Concrete Printing. Buildings, 15. · DOI
  65. Stel’makh, S.A., Shcherban’, E.M., Beskopylny, A.N., Mailyan, L.R., Meskhi, B., Shilov, A.A., Mailyan, A.L., Zakieva, N.I., Chernil’nik, A., and El’shaeva, D. (2023). Structural Formation and Properties of Eco-Friendly Foam Concrete Modified with Coal Dust. J. Compos. Sci., 7. · DOI
  66. Nguyen, T.-K., Thi, K.-D.T., Vo, D.-H., and Taffese, W.Z. (2025). Optimized Quaternary Binder Systems for Sustainable High-Performance Concrete: Insights from Taguchi Design. Appl. Sci., 15. · DOI
  67. Mirzaei, L., Ghebrab, T., and Fedler, C.B. (2025). Review and Evaluation of Agricultural Biomass Ashes as Supplementary Cementitious Materials for Sustainable Concrete. Processes, 13. · DOI

Metadata

Authors
Beskopylny, A. N., Stel’makh, S. A., Shcherban’, E. M., Shakhalieva, D. M., Chernil’nik, A., Shcherban’, N., Vyalikov, I., & Budovskiy, A.
Affiliations
  • Don State Technical University (RU)
  • Department of Design, Don State Technical University, 344003 Rostov-on-Don, Russia
  • Department of Unique Buildings and Constructions Engineering, Don State Technical University, 344003 Rostov-on-Don, Russia
Corresponding author
Beskopylny, Alexey N.
ORCID
Venue
Materials
Publisher
MDPI AG
Published
2026-02-20
Volume
19
Issue
4
Pages
814
ISSN
1996-1944 (ISSN-L)
DOI
10.3390/ma19040814
PMC
PMC12941514
OpenAlex
W7130654144
Cited by
8
References
56
Citations by year
2026: 8
FWCI
15.77
Type
journal article
Language
en
Open access
Licence
Locations
  • Materials (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • PubMed Central (publishedVersion, cc-by)
Funders
Russian Science Foundation (25-79-00121)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
  • Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
  • Physical Sciences › Engineering › Building and Construction › Materials Engineering and Processing
Keywords
foam concrete, fly ash, silica fume, silica nanoparticles, pozzolanic additives, compressive strength, thermal conductivity, density, pore structure, calcium silicate hydrate, industrial waste utilization, thermal insulation, microstructure

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review