The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability
Open accessAbstract
In the past few years, the synthesis of Cu nanoparticles has attracted much attention because of its huge potential for replacing expensive nano silver inks utilized in conductive printing. A major problem in utilizing these copper nanoparticles is their inherent tendency to oxidize in ambient conditions. Recently, there have been several reports presenting various approaches which demonstrate that copper nanoparticles can resist oxidation under ambient conditions, if they are coated by a proper protective layer. This layer may consist of an organic polymer, alkene chains, amorphous carbon or graphenes, or inorganic materials such as silica, or an inert metal. Such coated copper nanoparticles enable achieving high conductivities by direct printing of conductive patterns. These approaches open new possibilities in printed electronics, for example by using copper based inkjet inks to form various devices such as solar cells, Radio Frequency Identification (RFID) tags, and electroluminescence devices. This paper provides a review on the synthesis of copper nanoparticles, mainly by wet chemistry routes, and their utilization in printed electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis, Characterization, and Properties of Metallic Copper Nanoparticles
Dhas, N. A., Raj, C. P., & Gedanken, A. (1998) · Chemistry of Materials · doi:10.1021/cm9708269 · Cited by 651
Synthesis of copper metallic clusters using reverse micelles as microreactors
Lisiecki, I., & Pileni, M. P. (1993) · Journal of the American Chemical Society · doi:10.1021/ja00063a006 · Cited by 571
Synthesis of Size-Controlled and Shaped Copper Nanoparticles
Mott, D., Galkowski, J., Wang, L., Luo, J., & Zhong, C.-J. (2007) · Langmuir · doi:10.1021/la0635092 · Cited by 552
Preparation of monodispersed metal particles
Goia, D. V., & Matijević, E. (1998) · New Journal of Chemistry · doi:10.1039/a709236i · Cited by 545
Infrared extinction properties of gold nanoshells
Oldenburg, S. J., Jackson, J. B., Westcott, S. L., & Halas, N. J. (1999) · Applied Physics Letters · doi:10.1063/1.125183 · Cited by 543
Jeong, S., Woo, K., Kim, D., Lim, S., Kim, J. S., Shin, H., Xia, Y., & Moon, J. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700902 · Cited by 529
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Magdassi, S., Grouchko, M., Berezin, O., & Kamyshny, A. (2010) · ACS Nano · doi:10.1021/nn901868t · Cited by 509
Self-citationSynthesis and Optical Characterization of Au/Ag Core/Shell Nanorods
Liu, & Guyot-Sionnest, P. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp037644o · Cited by 448
Control of the Shape and the Size of Copper Metallic Particles
Lisiecki, I., Billoudet, F., & Pileni, M. P. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9523837 · Cited by 358
Synthesis, Characterization, and Nonlinear Optical Properties of Copper Nanoparticles
Huang, H. H., Yan, F. Q., Kek, Y. M., Chew, C. H., Xu, G. Q., Ji, W., Oh, P. S., & Tang, S. H. (1997) · Langmuir · doi:10.1021/la9605495 · Cited by 336
A Novel Method for Preparing Copper Nanorods and Nanowires
Liu, Z., & Bando, Y. (2003) · Advanced Materials · doi:10.1002/adma.200390073 · Cited by 325
Formation and Characteristics of Cu Colloids from CuO Powder by Laser Irradiation in 2-Propanol
Yeh, M.-S., Yang, Y.-S., Lee, Y.-P., Lee, H.-F., Yeh, Y.-H., & Yeh, C.-S. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp984163+ · Cited by 324
Large-scale production of carbon-coated copper nanoparticles for sensor applications
Athanassiou, E. K., Grass, R. N., & Stark, W. J. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/6/022 · Cited by 306
Sonochemical synthesis of amorphous Cu and nanocrystalline Cu2O embedded in a polyaniline matrix
Kumar, R. V., Mastai, Y., Diamant, Y., & Gedanken, A. (2001) · Journal of Materials Chemistry · doi:10.1039/b005769j · Cited by 292
Influence of ligand structure on the stability and oxidation of copper nanoparticles
Kanninen, P., Johans, C., Merta, J., & Kontturi, K. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.09.069 · Cited by 289
Luechinger, N. A., Athanassiou, E. K., & Stark, W. J. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/44/445201 · Cited by 286
Lee, W.-R., Kim, M. G., Choi, J.-R., Park, J.-I., Ko, S. J., Oh, S. J., & Cheon, J. (2005) · Journal of the American Chemical Society · doi:10.1021/ja053659j · Cited by 284
Silver Nanoparticles as Pigments for Water-Based Ink-Jet Inks
Magdassi, S., Bassa, A., Vinetsky, Y., & Kamyshny, A. (2003) · Chemistry of Materials · doi:10.1021/cm021804b · Cited by 268
Self-citationStable hydrosols of metallic and bimetallic nanoparticles immobilized on imogolite fibers
Liz-Marzan, L. M., & Philipse, A. P. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100041a031 · Cited by 246
Core−Shell (Ag)Au Bimetallic Nanoparticles: Analysis of Transmission Electron Microscopy Images
Srnová-Šloufová, I., Lednický, F., Gemperle, A., & Gemperlová, J. (2000) · Langmuir · doi:10.1021/la0009588 · Cited by 241
Radiation induced synthesis and characterization of copper nanoparticles
Joshi, S. S., Patil, S. F., Iyer, V., & Mahumuni, S. (1998) · Nanostructured Materials · doi:10.1016/s0965-9773(98)00153-6 · Cited by 233
Synthesis of Copper Nanoparticles in Nonionic Water-in-Oil Microemulsions
Qi, L., Ma, J., & Shen, J. (1997) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1996.4647 · Cited by 209
A method for the synthesis of spherical copper nanoparticles in the organic phase
Song, X., Sun, S., Zhang, W., & Yin, Z. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.01.019 · Cited by 204
Gas phase synthesis of fcc-cobalt nanoparticles
Grass, R. N., & Stark, W. J. (2006) · Journal of Materials Chemistry · doi:10.1039/b601013j · Cited by 174
Preparation of AucoreAgshell Nanorods and Characterization of Their Surface Plasmon Resonances
Ah, C. S., Hong, S. D., & Jang, D.-J. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp0113578 · Cited by 170
Nanoscale Copper Particles Derived from Solvated Cu Atoms in the Activation of Molecular Oxygen
Vitulli, G., Bernini, M., Bertozzi, S., Pitzalis, E., Salvadori, P., Coluccia, S., & Martra, G. (2002) · Chemistry of Materials · doi:10.1021/cm011199x · Cited by 167
Preparation and characterization of colloidal silver-platinum alloys
Torigoe, K., Nakajima, Y., & Esumi, K. (1993) · The Journal of Physical Chemistry · doi:10.1021/j100133a029 · Cited by 161
Synthesis of well-defined copper nanocubes by a one-pot solution process
Wang, Y., Chen, P., & Liu, M. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/24/016 · Cited by 140
Three-Dimensional Self-Assembled Monolayer (3D SAM) of n-Alkanethiols on Copper Nanoclusters
Ang, T. P., Wee, A. T. S., & Chin, W. S. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp049006r · Cited by 127
Casella, I. G., Cataldi, T. R. I., Guerrieri, A., & Desimoni, E. (1996) · Analytica Chimica Acta · doi:10.1016/s0003-2670(96)00351-0 · Cited by 112
Catalytic Properties of Layered Gold–Palladium Colloids
Schmid, G., West, H., Malm, J., et al. (1996) · Chemistry - A European Journal · doi:10.1002/chem.19960020910 · Cited by 112
Cu-Ag core-shell nanoparticles: A direct correlation between micro-Raman and electron microscopy
Cazayous, M., Langlois, C., Oikawa, T., Ricolleau, C., & Sacuto, A. (2006) · Physical Review B · doi:10.1103/physrevb.73.113402 · Cited by 97
Colloid stability : the role of surface forces
Tadros, T. F. (2007) · Cited by 74
New approaches to the synthesis of anisotropic, core–shell and hollow metal nanostructures
Sastry, M., Swami, A., Mandal, S., & Selvakannan, P. (2005) · Journal of Materials Chemistry · doi:10.1039/b502704g · Cited by 72
Synthesis of hydrophilic copper nanoparticles: effect of reaction temperature
Khanna, P. K., More, P. V., Jawalkar, J., et al. (2008) · Journal of Nanoparticle Research · doi:10.1007/s11051-008-9441-9 · Cited by 64
Nanoparticulate copper – routes towards oxidative stability
Engels, V., Benaskar, F., Jefferson, D. A., Johnson, B. F. G., & Wheatley, A. E. H. (2010) · Dalton Transactions · doi:10.1039/c0dt00134a · Cited by 62
Reduction of the copper ion to its metal and clusters in alcoholic media: A radiation chemical study
Dey, G. R. (2005) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2005.04.012 · Cited by 46
Yanase, A., & Komiyama, H. (1991) · Surface Science · doi:10.1016/0039-6028(91)90057-y · Cited by 12
Cited by
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Self-citationHuang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Stability and Reactivity: Positive and Negative Aspects for Nanoparticle Processing
Xu, L., Liang, H.-W., Yang, Y., & Yu, S.-H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00208 · Cited by 472
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Self-citationMicrofluidization of Graphite and Formulation of Graphene-Based Conductive Inks
Karagiannidis, P. G., Hodge, S. A., Lombardi, L., Tomarchio, F., Decorde, N., Milana, S., Goykhman, I., Su, Y., Mesite, S. V., Johnstone, D. N., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b07735 · Cited by 348
Metadata
- Authors
- Magdassi, S., Grouchko, M., & Kamyshny, A.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2010-09-08
- Volume
- 3
- Issue
- 9
- Pages
- 4626-4638
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2108234203
- Cited by
- 429
- References
- 38
- FWCI
- 10.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.