The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening
Open accessAbstract
The laser shock peening (LSP) process using a Q-switched pulsed laser beam for surface modification has been reviewed. The development of the LSP technique and its numerous advantages over the conventional shot peening (SP) such as better surface finish, higher depths of residual stress and uniform distribution of intensity were discussed. Similar comparison with ultrasonic impact peening (UIP)/ultrasonic shot peening (USP) was incorporated, when possible. The generation of shock waves, processing parameters, and characterization of LSP treated specimens were described. Special attention was given to the influence of LSP process parameters on residual stress profiles, material properties and structures. Based on the studies so far, more fundamental understanding is still needed when selecting optimized LSP processing parameters and substrate conditions. A summary of the parametric studies of LSP on different materials has been presented. Furthermore, enhancements in the surface micro and nanohardness, elastic modulus, tensile yield strength and refinement of microstructure which translates to increased fatigue life, fretting fatigue life, stress corrosion cracking (SCC) and corrosion resistance were addressed. However, research gaps related to the inconsistencies in the literature were identified. Current status, developments and challenges of the LSP technique were discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Laser shock processing and its effects on microstructure and properties of metal alloys: a review
Montross, C. (2002) · International Journal of Fatigue · doi:10.1016/s0142-1123(02)00022-1 · Cited by 1,111
Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour
Peyre, P., Fabbro, R., Merrien, P., & Lieurade, H. P. (1996) · Materials Science and Engineering A · doi:10.1016/0921-5093(95)10084-9 · Cited by 736
Nalla, R. K., Altenberger, I., Noster, U., Liu, G. Y., Scholtes, B., & Ritchie, R. O. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00069-8 · Cited by 523
Laser shock processing: a review of the physics and applications
Peyre, P., & Fabbro, R. (1995) · Optical and Quantum Electronics · doi:10.1007/bf00326477 · Cited by 519
Physics and applications of laser-shock processing
Fabbro, R., Peyre, P., Berthe, L., & Scherpereel, X. (1998) · Journal of Laser Applications · doi:10.2351/1.521861 · Cited by 419
Surface nanocrystallization of iron induced by ultrasonic shot peening
Tao, N. R., Sui, M., Lü, J., & Lua, K. (1999) · Nanostructured Materials · doi:10.1016/s0965-9773(99)00324-4 · Cited by 402
Engineering Materials: Properties and Selection
Budinski, K. G. (1979) · Cited by 373
Sano, Y., OBATA, M., Kubo, T., Mukai, N., Yoda, M., MASAKI, K., & Yasuo, O. C. H. I. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.11.017 · Cited by 371
Improvement of fatigue life of Ti–6Al–4V alloy by laser shock peening
Zhang, X. C., Zhang, Y. K., Lu, J., Xuan, F., Wang, Z. D., & Tu, S. T. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.01.076 · Cited by 319
Finite element simulation of laser shock peening
Braisted, W. (1999) · International Journal of Fatigue · doi:10.1016/s0142-1123(99)00035-3 · Cited by 305
Cited by
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Mao, B., Siddaiah, A., Liao, Y., & Menezes, P. L. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.02.009 · Cited by 489
Uzan, N. E., Ramati, S., Shneck, R., Frage, N., & Yeheskel, O. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.030 · Cited by 274
Recent development and future perspectives of low energy laser shock peening
Kalainathan, S., & Prabhakaran, S. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.02.007 · Cited by 101
Xie, X., Zhang, L., Zhu, L., Li, Y., Hong, T., Yang, W., & Shan, X. (2023) · Coatings · doi:10.3390/coatings13050859 · Cited by 49
Metadata
- Authors
- Gujba, A., & Medraj, M.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2014-12-10
- Volume
- 7
- Issue
- 12
- Pages
- 7925-7974
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2129390192
- Cited by
- 416
- References
- 78
- FWCI
- 16.75
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening. https://app.cochat.ai/papers/10.3390/ma7127925
- The paper
- Gujba, A., & Medraj, M. (2014). Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening. Materials. https://doi.org/10.3390/ma7127925
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.