Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 1

The DOI matches its Crossref record; the references it cites are not checked yet.

Multi-Physics Study of Hairpin Winding Cooling Systems in Less-Rare-Earth Permanent Magnet Traction Motors

Zarghani, Ali, Sergeant, Peter, Ibrahim, Mohamed N.·2026·Machines

Abstract

Hairpin windings are increasingly adopted in permanent magnet (PM) traction machines owing to their high slot fill factor, compact end-winding structure, and suitability for automated manufacturing. However, limited heat dissipation and high copper losses under peak loading and high-frequency operation result in severe thermal constraints, which restrict the power rating of the machine. This paper presents a multi-physics comparison of different winding cooling topologies for a PM machine with hairpin winding, including hollow conductor cooling, end-winding cooling, and cooling channel insertion at slot-bottom, slot-middle, and slot-opening regions. A coupled electromagnetic–thermal model based on the finite element method (FEM), which accounts the heat transfer between different components, is used to analyze temperature distribution, losses, efficiency, loading capacity, and hydraulic requirements. The results show that the position of the cooling channel has great influence on the thermal behavior and electromagnetic performance of the machine under different working conditions. The study emphasizes the strong coupling between cooling design, conductor geometry, AC loss behavior, and efficiency and provides practical design guidelines for selecting appropriate cooling techniques in high-power-density traction machines. Consequently, an improved cooling system results in a reduced amount of PM for the same output power range.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/machines14070776

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

The citation lists haven’t been fetched yet

Cited by 1

Research works printed but not linked: 46

  1. Guo, Y., Liu, L., Ba, X., Lu, H., Lei, G., Yin, W., and Zhu, J. (2023). Designing high-power-density electric motors for electric vehicles with advanced magnetic materials. World Electr. Veh. J., 14. · DOI
  2. Jia, 2025, Overview of High Power Density Machines, CES Trans. Electr. Mach. Syst., 9, 390, 10.30941/CESTEMS.2025.00030 · doi:10.30941/cestems.2025.00030
  3. Wu, S., Zhou, J., Zhang, X., and Yu, J. (2022). Design and research on high power density motor of integrated motor drive system for electric vehicles. Energies, 15. · DOI
  4. Li, L., Dai, L., Niu, S., Fu, W., and Chau, K. (2025). Critical review of direct-drive in-wheel motors in electric vehicles. Energies, 18. · doi:10.3390/en18061521
  5. Zarghani, A., Sergeant, P., and Ibrahim, M.N. (2025, January 18–21). Comprehensive Overview of Using Additive Manufacturing for Multiphysics Performance Improvement of Electric Machines. Proceedings of the 2025 IEEE International Electric Machines & Drives Conference (IEMDC), Houston, TX, USA. · DOI
  6. Karakatsanis, T.S. (2025). Optimization and Performance Evaluation of PM Motor and Induction Motor for Marine Propulsion Systems. Appl. Syst. Innov., 8. · doi:10.3390/asi8030058
  7. Deisenroth, D.C., and Ohadi, M. (2019). Thermal Management of High-Power Density Electric Motors for Electrification of Aviation and Beyond. Energies, 12. · doi:10.3390/en12193594
  8. Ghaheri, 2025, A Detailed Thermal Analysis for Performance Improvement of Axial Transverse-Flux-Switching PM Wind Turbine Generator, CES Trans. Electr. Mach. Syst., 9, 212, 10.30941/CESTEMS.2025.00017 · doi:10.30941/cestems.2025.00017
  9. Selema, A., Ibrahim, M.N., and Sergeant, P. (2022). Electrical machines winding technology: Latest advancements for transportation Electrification. Machines, 10. · DOI
  10. Shams Ghahfarokhi, P., Podgornovs, A., Cardoso, A.J.M., Kallaste, A., Belahcen, A., and Vaimann, T. (2022). Hairpin windings for electric vehicle motors: Modeling and investigation of AC loss-mitigating approaches. Machines, 10. · DOI
  11. Notari, 2024, An asymmetrical additively manufactured hairpin winding for increased efficiency and sustainability, IEEE Trans. Transp. Electrif., 10, 9529, 10.1109/TTE.2024.3374515 · DOI
  12. Jiang, 2025, Comparative Study of Stranded and Hairpin Windings for 250 kW Continuous Operation of High-Speed Heavy-Duty EV Traction Motor, IEEE Trans. Ind. Appl., 61, 9254, 10.1109/TIA.2025.3583649 · doi:10.1109/tia.2025.3583649
  13. Tesfamikael, H.H., Darmani, M.A., Murataliyev, M., Hague, R.J.M., Gerada, C., and Degano, M. (2026). Loss Characterisation of Additively Manufactured Windings for Aerospace Propulsion Motors. IEEE Trans. Transp. Electrif. · doi:10.1109/tte.2026.3683253
  14. Ahmad, Z., Kallaste, A., Naseer, M.U., Vaimann, T., and Hussain, S. (2026). An Approach Towards AC Power Loss Reduction in Additively Manufactured Winding for Electrical Machine. IEEE Trans. Magn. · doi:10.1109/tmag.2026.3696461
  15. Ismaeel, S.M., Ibrahim, M.N., Rashad, E.M., and Sergeant, P. (2024). Asymmetric Hairpin Winding Design for Losses Reduction with Thermal Analysis for an Electric Vehicle Case Study. Energies, 17. · doi:10.3390/en17246494
  16. Liang, 2021, Water jacket and slot optimization of a water-cooling permanent magnet synchronous in-wheel motor, IEEE Trans. Ind. Appl., 57, 2431, 10.1109/TIA.2021.3064779 · doi:10.1109/tia.2021.3064779
  17. Li, 2023, Cooling water jacket design of motorized spindle system using multi-objective topology optimization, Appl. Therm. Eng., 224, 120112, 10.1016/j.applthermaleng.2023.120112 · doi:10.1016/j.applthermaleng.2023.120112
  18. Acquaviva, 2020, Design and verification of in-slot oil-cooled tooth coil winding PM machine for traction application, IEEE Trans. Ind. Electron., 68, 3719, 10.1109/TIE.2020.2985009 · doi:10.1109/tie.2020.2985009
  19. Park, 2022, Enhancement of cooling performance in traction motor of electric vehicle using direct slot cooling method, Appl. Therm. Eng., 217, 119082, 10.1016/j.applthermaleng.2022.119082 · doi:10.1016/j.applthermaleng.2022.119082
  20. Tikadar, 2025, Comparative performance analysis of slot-embedded cooling of electric motors for various topologies, Appl. Therm. Eng., 268, 125843, 10.1016/j.applthermaleng.2025.125843 · doi:10.1016/j.applthermaleng.2025.125843
  21. Liu, 2025, Immersion evaporative cooling for high-power density motors in future aircraft, Appl. Therm. Eng., 278, 127036, 10.1016/j.applthermaleng.2025.127036 · doi:10.1016/j.applthermaleng.2025.127036
  22. Reinap, A., Andersson, M., Márquez-Fernández, F.J., Abrahamsson, P., and Alaküla, M. (2019, January 19–21). Performance estimation of a traction machine with direct cooled hairpin winding. Proceedings of the 2019 IEEE Transportation Electrification Conference and Expo (ITEC), Detroit, MI, USA. · doi:10.1109/itec.2019.8790545
  23. Canseven, 2025, Advanced Direct Cooling Arrangements for Machines With Hairpin Windings, IEEE Access, 13, 201711, 10.1109/ACCESS.2025.3636754 · doi:10.1109/access.2025.3636754
  24. Cai, W., Li, G., Yang, Y., and Gong, H. (2024, January 20–22). New Cooling Structure for Improving the Oil Cooling Effects of the End Winding of Flat Winding. Proceedings of the Annual Conference of China Electrotechnical Society, Xi’an, China. · doi:10.1007/978-981-96-1379-3_60
  25. Gai, 2025, Numerical and experimental investigation of fluid flow and heat transfer in hairpin end winding for an oil-injected cooled traction motor, IEEE Trans. Transp. Electrif., 11, 7243, 10.1109/TTE.2024.3524666 · doi:10.1109/tte.2024.3524666
  26. Keuter, R.J., Niebuhr, F., Nozinski, M., Krüger, E., Kabelac, S., and Ponick, B. (2023). Design of a direct-liquid-cooled motor and operation strategy for the cooling system. Energies, 16. · doi:10.3390/en16145319
  27. Kampker, A., Brans, F., Heimes, H.H., Backes, T., Dorn, B., and Al-Kinani, R. (2023, January 29–30). Parameter Study on Bending of Rectangular Copper Hollow Wire for the Use in Hairpin Stator Electric Traction Motors. Proceedings of the 2023 13th International Electric Drives Production Conference (EDPC), Regensburg, Germany. · doi:10.1109/edpc60603.2023.10372152
  28. Zharkov, 2026, Stator winding design for a high specific power aircraft propulsion motor, Electr. Eng., 108, 123, 10.1007/s00202-025-03338-7 · doi:10.1007/s00202-025-03338-7
  29. Venturini, G., Volpe, G., and Popescu, M. (2021, January 17–20). Slot water jacket cooling system for traction electrical machines with hairpin windings: Analysis and comparison. Proceedings of the 2021 IEEE International Electric Machines & Drives Conference (IEMDC), Hartford, CT, USA. · doi:10.1109/iemdc47953.2021.9449581
  30. Lehmann, R., Künzler, M., Moullion, M., and Gauterin, F. (2022). Comparison of commonly used cooling concepts for electrical machines in automotive applications. Machines, 10. · doi:10.3390/machines10060442
  31. Tikadar, 2021, Comparison of electro-thermal performance of advanced cooling techniques for electric vehicle motors, Appl. Therm. Eng., 183, 116182, 10.1016/j.applthermaleng.2020.116182 · doi:10.1016/j.applthermaleng.2020.116182
  32. Tran, 2025, Coupled electromagnetic-thermal analysis of propulsion motor for fully electric ships with system-level design approach, IEEE Trans. Transp. Electrif., 11, 8018, 10.1109/TTE.2025.3534575 · DOI
  33. Reinecke, 2024, Investigation of stator cooling concepts of an electric machine for maximization of continuous power, SAE Int. J. Adv. Curr. Pract. Mobil., 7, 1187, 10.4271/2024-01-3014 · doi:10.4271/2024-01-3014
  34. Konda, 2024, Quantitative assessment of cooling methods for electrical machines in aircraft drives, IEEE Access, 12, 192768, 10.1109/ACCESS.2024.3517319 · DOI
  35. Gierczynski, M., Jakubowski, R., Kupiec, E., Seredynski, M., Jaworski, M., and Grzesiak, L.M. (2024). Modeling of the fourth-generation Toyota Prius traction machine as the reference for future designs. Energies, 17. · doi:10.3390/en17194796
  36. Chen, 2019, Thermal modeling of hollow conductors for direct cooling of electrical machines, IEEE Trans. Ind. Electron., 67, 895, 10.1109/TIE.2019.2899542 · doi:10.1109/tie.2019.2899542
  37. Ramones, 2025, Estimating the real-time temperature of a 48V permanent magnet synchronous motor using a thermal neural network, Energy Convers. Manag. X, 27, 101140
  38. Mishra, 2025, Fast hotspot thermal network for grid optimization of large multi-machine reactive power boosting at ultra-high losses, Int. J. Electr. Power Energy Syst., 171, 110927, 10.1016/j.ijepes.2025.110927 · doi:10.1016/j.ijepes.2025.110927
  39. Zhao, 2025, A Review of Research Methods for Stator Temperature Monitoring in PMSM, CES Trans. Electr. Mach. Syst., 9, 407, 10.30941/CESTEMS.2025.00037 · DOI
  40. Ghahfarokhi, 2018, Hybrid thermal model of a synchronous reluctance machine, Case Stud. Therm. Eng., 12, 381, 10.1016/j.csite.2018.05.007 · doi:10.1016/j.csite.2018.05.007
  41. Ding, L., Ju, X., Cui, S., and Cheng, Y. (2022, January 27–29). Hybrid modeling method for thermal analysis of hairpin winding permanent magnet machine. Proceedings of the 2022 IEEE 5th International Electrical and Energy Conference (CIEEC), Nangjing, China. · doi:10.1109/cieec54735.2022.9845908
  42. Chong, Y.C., Jahangirian, S., Adam, H., Michon, M., Liu, C., Xu, Z., Gerada, D., and Gerada, C. (2023, January 15–18). Analytical modelling technique of oil-cooled electric machine using empirical correlation and LPTN. Proceedings of the 2023 IEEE International Electric Machines & Drives Conference (IEMDC), San Francisco, CA, USA. · doi:10.1109/iemdc55163.2023.10239074
  43. Camilleri, 2017, Prediction and measurement of the heat transfer coefficient in a direct oil-cooled electrical machine with segmented stator, IEEE Trans. Ind. Electron., 65, 94, 10.1109/TIE.2017.2714131 · doi:10.1109/tie.2017.2714131
  44. Staton, 2008, Convection heat transfer and flow calculations suitable for electric machines thermal models, IEEE Trans. Ind. Electron., 55, 3509, 10.1109/TIE.2008.922604 · doi:10.1109/tie.2008.922604
  45. Hlioui, 2023, Ac losses in windings: Review and comparison of models with application in electric machines, IEEE Access, 12, 1552
  46. Petrov, 2025, Design of a High-Specific-Power Traction Motor: Innovations and Strategies for Superior Performance, IEEE Access, 13, 125659, 10.1109/ACCESS.2025.3589939 · doi:10.1109/access.2025.3589939

Metadata

Authors
Zarghani, A., Sergeant, P., & Ibrahim, M. N.
Venue
Machines
Publisher
MDPI AG
Published
2026-07-10
Volume
14
Issue
7
Pages
776
ISSN
2075-1702
Cited by
1
Language
en
Funders
Research Foundation - Flanders (G0A2824N)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Multi-Physics Study of Hairpin Winding Cooling Systems in Less-Rare-Earth Permanent Magnet Traction Motors. https://app.cochat.ai/papers/10.3390/machines14070776
The paper
Zarghani, A., Sergeant, P., & Ibrahim, M. N. (2026). Multi-Physics Study of Hairpin Winding Cooling Systems in Less-Rare-Earth Permanent Magnet Traction Motors. Machines. https://doi.org/10.3390/machines14070776

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.