The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
A Review of Feature Extraction Methods in Vibration-Based Condition Monitoring and Its Application for Degradation Trend Estimation of Low-Speed Slew Bearing
Open accessAbstract
This paper presents an empirical study of feature extraction methods for the application of low-speed slew bearing condition monitoring. The aim of the study is to find the proper features that represent the degradation condition of slew bearing rotating at very low speed (≈ 1 r/min) with naturally defect. The literature study of existing research, related to feature extraction methods or algorithms in a wide range of applications such as vibration analysis, time series analysis and bio-medical signal processing, is discussed. Some features are applied in vibration slew bearing data acquired from laboratory tests. The selected features such as impulse factor, margin factor, approximate entropy and largest Lyapunov exponent (LLE) show obvious changes in bearing condition from normal condition to final failure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564
Image analysis and mathematical morphology
(1982) · Computer Graphics and Image Processing · doi:10.1016/0146-664x(82)90078-8 · Cited by 8,151
Physiological time-series analysis using approximate entropy and sample entropy
Richman, J. S., & Moorman, J. R. (2000) · American Journal of Physiology-Heart and Circulatory Physiology · doi:10.1152/ajpheart.2000.278.6.h2039 · Cited by 7,880 · cited 4×
“The sample entropy has been proposed by Richman and Moorman [66] to improve the approximate entropy.”
BackgroundMethodInfluentialEmpirical Mode Decomposition as a Filter Bank
Flandrin, P., Rilling, G., & Goncalves, P. (2004) · IEEE Signal Processing Letters · doi:10.1109/lsp.2003.821662 · Cited by 2,583
A review on empirical mode decomposition in fault diagnosis of rotating machinery
Lei, Y., Lin, J., He, Z., & Zuo, M. J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.09.015 · Cited by 1,886
Dimensionality Reduction for Fast Similarity Search in Large Time Series Databases
Keogh, E., Chakrabarti, K., Pazzani, M., & Mehrotra, S. (2001) · Knowledge and Information Systems · doi:10.1007/pl00011669 · Cited by 1,573
Qiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477
Estimation of the Kolmogorov entropy from a chaotic signal
Grassberger, P., & Procaccia, I. (1983) · Physical Review A · doi:10.1103/physreva.28.2591 · Cited by 1,440
On empirical mode decomposition and its algorithms
Rilling, G., Flandrin, P., & Gonçalvès, P. (2003) · Cited by 1,402
Antoni, J., & Randall, R. B. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.002 · Cited by 1,333
Peng, Z. K., & Chu, F. L. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00075-x · Cited by 1,192
Short term spectral analysis, synthesis, and modification by discrete Fourier transform
Allen, J. (1977) · IEEE Transactions on Acoustics, Speech, and Signal Processing · doi:10.1109/tassp.1977.1162950 · Cited by 1,051
Feng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998
Fast Time Sequence Indexing for Arbitrary Lp Norms
Yi, B.-K., & Faloutsos, C. (2018) · doi:10.1184/r1/6605618 · Cited by 650
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Approximate Entropy as a diagnostic tool for machine health monitoring
Yan, R., & Gao, R. X. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.02.009 · Cited by 454
Use of the fractal dimension for the analysis of electroencephalographic time series
Affinito, M., Carrozzi, M., Accardo, A., & Bouquet, F. (1997) · Biological Cybernetics · doi:10.1007/s004220050394 · Cited by 426
Rangayyan, R. M. (2001) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470544204 · Cited by 422
Locally adaptive dimensionality reduction for indexing large time series databases
Chakrabarti, K., Keogh, E., Mehrotra, S., & Pazzani, M. (2002) · ACM Transactions on Database Systems · doi:10.1145/568518.568520 · Cited by 407
Vibration analysis of rotating machinery using time–frequency analysis and wavelet techniques
Al-Badour, F., Sunar, M., & Cheded, L. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.01.017 · Cited by 353
Staszewski, W. J., Worden, K., & Tomlinson, G. R. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1997.0102 · Cited by 329
Fault diagnosis of low speed bearing based on relevance vector machine and support vector machine
Widodo, A., Kim, E. Y., Son, J.-D., Yang, B.-S., Tan, A. C. C., Gu, D.-S., Choi, B.-K., & Mathew, J. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.09.033 · Cited by 324 · cited 1×
“The RMS, skewness, kurtosis, entropy and AR coefficients have been applied in vibration datasets from induction motor [14] and rolling element bearing [15].”
MethodAn Introduction to Audio Content Analysis: Applications in Signal Processing and Music Informatics
Lerch, A. (2012) · Wiley eBooks · doi:10.1002/9781118393550 · Cited by 298
Intelligent fault diagnosis of rolling element bearing based on SVMs and fractal dimension
Yang, J., Zhang, Y., & Zhu, Y. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.10.005 · Cited by 275
Yu, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.02.006 · Cited by 258
Yiakopoulos, C. T., Gryllias, K. C., & Antoniadis, I. A. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.08.083 · Cited by 241
Wang, S., Huang, W., & Zhu, Z. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.10.013 · Cited by 188
EEMD-based multiscale ICA method for slewing bearing fault detection and diagnosis
Žvokelj, M., Zupan, S., & Prebil, I. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.01.046 · Cited by 184
Fractal Dimension in Human Cerebellum Measured by Magnetic Resonance Imaging
Liu, J. Z., Zhang, L. D., & Yue, G. H. (2003) · Biophysical Journal · doi:10.1016/s0006-3495(03)74817-6 · Cited by 160
Žvokelj, M., Zupan, S., & Prebil, I. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.03.002 · Cited by 159
APPLICATION OF MORPHOLOGICAL OPERATORS AS ENVELOPE EXTRACTORS FOR IMPULSIVE-TYPE PERIODIC SIGNALS
Nikolaou, N. G., & Antoniadis, I. A. (2003) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2002.1576 · Cited by 159
Early Classification of Bearing Faults Using Morphological Operators and Fuzzy Inference
Raj, A., & Murali, N. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188259 · Cited by 158
Widodo, A., & Yang, B. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.06.018 · Cited by 150
Žvokelj, M., Zupan, S., & Prebil, I. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.09.002 · Cited by 141
Logan, D. B., & Mathew, J. (1996) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1996.0018 · Cited by 141
Characterization of Atrophic Changes in the Cerebral Cortex Using Fractal Dimensional Analysis
Initiative, A. T. A. D. N., King, R., George, A. T., Jeon, T., Hynan, L. S., Youn, T. S., Kennedy, D. N., & Dickerson, B. C. (2009) · Brain Imaging and Behavior · doi:10.1007/s11682-008-9057-9 · Cited by 133
Adaptive neuro-fuzzy inference system for classification of ECG signals using Lyapunov exponents
Übeylı, E. D. (2008) · Computer Methods and Programs in Biomedicine · doi:10.1016/j.cmpb.2008.10.012 · Cited by 126
Fractal dimensions of speech sounds: Computation and application to automatic speech recognition
Maragos, P. A., & Potamianos, A. (1999) · The Journal of the Acoustical Society of America · doi:10.1121/1.426738 · Cited by 125
Epileptic seizure detection: A nonlinear viewpoint
Päivinen, N., Lammi, S., Pitkänen, A., Nissinen, J., Penttonen, M., & Grönfors, T. (2005) · Computer Methods and Programs in Biomedicine · doi:10.1016/j.cmpb.2005.04.006 · Cited by 115
Instantaneous energy density as a feature for gear fault detection
Loutridis, S. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.12.001 · Cited by 112
Faults diagnosis of rolling element bearings based on modified morphological method
Dong, Y., Liao, M., Zhang, X., & Wang, F. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.10.008 · Cited by 104
Degradation trend estimation of slewing bearing based on LSSVM model
Lu, C., Chen, J., Hong, R., et al. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.02.031 · Cited by 100
Shen, Z., He, Z., Chen, X., Sun, C., & Liu, Z. (2012) · Sensors · doi:10.3390/s120810109 · Cited by 93
Spectral Regression Based Fault Feature Extraction for Bearing Accelerometer Sensor Signals
Xia, Z., Xia, S., Wan, L., & Cai, S. (2012) · Sensors · doi:10.3390/s121013694 · Cited by 91
Braun, S. G., & Feldman, M. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.04.005 · Cited by 91
Application of improved morphological filter to the extraction of impulsive attenuation signals
Wang, J., Xu, G., Zhang, Q., & Liang, L. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.03.012 · Cited by 90
Dong, G., & Chen, J. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.06.008 · Cited by 87
Caesarendra, W., Kosasih, B., Tieu, A. K., et al. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.05.021 · Cited by 75
Self-citationCaesarendra, W., Kosasih, B., Tieu, A. K., & Moodie, C. A. S. (2013) · IEEE/ASME International Conference on Advanced Intelligent Mechatronics · doi:10.1109/aim.2013.6584344 · Cited by 69
Self-citationMachinery Diagnosis Based on Wavelet Packets
Liu, B., Ling, S.-F., & Meng, Q. (1997) · Journal of Vibration and Control · doi:10.1177/107754639700300102 · Cited by 64
Niu, G., Widodo, A., Son, J.-D., Yang, B., Hwang, D.-H., & Kang, D.-S. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.08.024 · Cited by 59
Kolmogorov-Smirnov test for rolling bearing performance degradation assessment and prognosis
Cong, F., Chen, J., & Pan, Y. (2010) · Journal of Vibration and Control · doi:10.1177/1077546310384003 · Cited by 56
Classification of Power Quality disturbances using the iterative Hilbert Huang Transform
Drummond, C., & Sutanto, D. (2010) · International Conference on Harmonics and Quality of Power · doi:10.1109/ichqp.2010.5625326 · Cited by 52
Kanjilal, P. P., Bhattacharya, J., & Saha, G. (1999) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.59.4013 · Cited by 52
Circular domain features based condition monitoring for low speed slewing bearing
Caesarendra, W., Kosasih, B., Tieu, A. K., & Moodie, C. A. S. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.10.021 · Cited by 50
Self-citationReliability-based residual life prediction of large-size low-speed slewing bearings
Feng, Y., Huang, X., Chen, J., Wang, H., & Hong, R. (2014) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2014.06.013 · Cited by 30
Unbiased estimation of multi-fractal dimensions of finite data sets
Roberts, A. J., & Cronin, A. (1996) · Physica A Statistical Mechanics and its Applications · doi:10.1016/s0378-4371(96)00165-3 · Cited by 27
Cited by
Zio, E. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.108119 · Cited by 714
Zhang, C., Mousavi, A. A., Masri, S. F., Gholipour, G., Yan, K., & Li, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109175 · Cited by 395
A hybrid deep-learning model for fault diagnosis of rolling bearings
Xu, Y., Li, Z., Wang, S., Li, W., Sarkodie-Gyan, T., & Feng, S. (2021) · Measurement · doi:10.1016/j.measurement.2020.108502 · Cited by 326
A Review on Vibration-Based Condition Monitoring of Rotating Machinery
Tiboni, M., Remino, C., Bussola, R., & Amici, C. (2022) · Applied Sciences · doi:10.3390/app12030972 · Cited by 314
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2019) · IEEE Access · doi:10.1109/access.2019.2938227 · Cited by 312
Metadata
- Authors
- Caesarendra, W., & Tjahjowidodo, T.
- Venue
- Machines
- Publisher
- MDPI AG
- Published
- 2017-09-27
- Volume
- 5
- Issue
- 4
- Pages
- 21
- ISSN
- 2075-1702 (ISSN-L)
- OpenAlex
- W2759531725
- Cited by
- 427
- References
- 57
- FWCI
- 19.29
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.