CoChat

High-Precision Propagation-Loss Measurement of Single-Mode Optical Waveguides on Lithium Niobate on Insulator

Open access
Lin, Jintian, Zhou, Junxia, Wu, Rongbo, Wang, Min, Fang, Zhiwei, Chu, Wei, Zhang, Jianhao, Qiao, Lingling, Cheng, Ya · 2019 · Micromachines

Published version of a preprint

The DOI matches its Crossref record; 28 of the 30 references it cites were found in a registry or an index.

Abstract

We demonstrate the fabrication of single-mode optical waveguides on lithium niobate on an insulator (LNOI) by optical patterning combined with chemomechanical polishing. The fabricated LNOI waveguides had a nearly symmetric mode profile of ~2.5 µm mode field size (full-width at half-maximum). We developed a high-precision measurement approach by which single-mode waveguides were characterized to have propagation loss of ~0.042 dB/cm.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/mi10090612

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Process flow of lithium niobate on insulator (LNOI) waveguide fabrication. (a) Structure of LNOI substrate; (b) Depositing a layer of Cr film on LNOI; (c) Patterning the Cr film by femtosecond laser ablation for producing the mask of waveguides; (d) Transferring the mask pattern to LNOI by chemo-mechanical polish; (e) Removing the remaining Cr film by wet chemical etching; (f) Coating the waveguides with a layer of Ta2O5 to form the cladding.
Figure 1 Process flow of lithium niobate on insulator (LNOI) waveguide fabrication. (a) Structure of LNOI substrate; (b) Depositing a layer of Cr film on LNOI; (c) Patterning the Cr film by femtosecond laser ablation for producing the mask of waveguides; (d) Transferring the mask pattern to LNOI by chemo-mechanical polish; (e) Removing the remaining Cr film by wet chemical etching; (f) Coating the waveguides with a layer of Ta2O5 to form the cladding.CC BY · PubMed Central
Figure 2 (a) Scanning-electron-microscope (SEM) images of lithium niobate (LN) waveguide before coating the Ta2O5 cladding layer) showing very smooth sidewalls. Inset: waveguide cross-section. Spatial distributions of (b) transverse-electric (TE) and (c) transverse-magnetic (TM) modes.
Figure 2 (a) Scanning-electron-microscope (SEM) images of lithium niobate (LN) waveguide before coating the Ta2O5 cladding layer) showing very smooth sidewalls. Inset: waveguide cross-section. Spatial distributions of (b) transverse-electric (TE) and (c) transverse-magnetic (TM) modes.CC BY · PubMed Central
Figure 3 (a) SEM image of waveguide covered with Ta2O5. (b) Measured and (c) calculated TE mode profiles. (d) Measured and (e) calculated TM mode profiles.
Figure 3 (a) SEM image of waveguide covered with Ta2O5. (b) Measured and (c) calculated TE mode profiles. (d) Measured and (e) calculated TM mode profiles.CC BY · PubMed Central
Figure 4 (a) Device layout. Here, phase differences θL, θ, and θR were contributed by fabrication imperfections of interferometer arms and of electro-optic (EO) modulation. (b) SEM image of directional coupler; inset: overview photograph of fabricated device consisting of three beam splitters. (c) Optical-microscope image of electrodes contacted by three pins.
Figure 4 (a) Device layout. Here, phase differences θL, θ, and θR were contributed by fabrication imperfections of interferometer arms and of electro-optic (EO) modulation. (b) SEM image of directional coupler; inset: overview photograph of fabricated device consisting of three beam splitters. (c) Optical-microscope image of electrodes contacted by three pins.CC BY · PubMed Central
Figure 5 (a) Calculated normalized electric-field distribution in cross-sectional plane of LNOI waveguide when applying voltage on Au microelectrodes, showing that the electric field was almost parallel to the LN optic axis. (b) Normalized transmission spectra of output Ports U and G as a function of applied voltage V, featuring sinusoidal-like curve.
Figure 5 (a) Calculated normalized electric-field distribution in cross-sectional plane of LNOI waveguide when applying voltage on Au microelectrodes, showing that the electric field was almost parallel to the LN optic axis. (b) Normalized transmission spectra of output Ports U and G as a function of applied voltage V, featuring sinusoidal-like curve.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 28 references

Research works printed but not linked: 1

  1. Chrostowski L. Hochberg M. Silicon Photonics Design Cambridge University Press Cambridge, UK

Cited by

See all 31

Metadata

Authors
Lin, J., Zhou, J., Wu, R., Wang, M., Fang, Z., Chu, W., Zhang, J., Qiao, L., & Cheng, Y.
Affiliations
  • Chinese Academy of Sciences (CN)
  • East China Normal University (CN)
  • Shanxi University (CN)
Corresponding author
Cheng, Ya
Venue
Micromachines
Publisher
MDPI AG
Published
2019-09-15
Volume
10
Issue
9
Pages
612
ISSN
2072-666X (ISSN-L)
OpenAlex
W2972510821
Cited by
31
References
30
Citations by year
2026: 2 · 2025: 2 · 2024: 6 · 2023: 10 · 2022: 1 · 2021: 3 · 2020: 6 · 2019: 1
FWCI
1.21
Type
journal article
Language
en
Open access
Locations
  • Micromachines (publishedVersion, cc-by)
  • Preprints.org (acceptedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
National Natural Science Foundation of China (11734009)
Topics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photorefractive and Nonlinear Optics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
Keywords
lithium niobate on insulator, single-mode waveguides, path loss, optical patterning, chemical mechanical polishing, integrated photonics, waveguide fabrication

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: High-Precision Propagation-Loss Measurement of Single-Mode Optical Waveguides on Lithium Niobate on Insulator. https://app.cochat.ai/papers/10.3390/mi10090612
The paper
Lin, J., Zhou, J., Wu, R., Wang, M., Fang, Z., Chu, W., Zhang, J., Qiao, L., & Cheng, Y. (2019). High-Precision Propagation-Loss Measurement of Single-Mode Optical Waveguides on Lithium Niobate on Insulator. Micromachines. https://doi.org/10.3390/mi10090612

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.