Factors Affecting the Compressive Strength of Geopolymers: A Review
Open accessThe DOI matches its Crossref record; 202 of the 202 references it cites were found in a registry or an index.
Abstract
Geopolymers are created by mixing a source of aluminosilicates, which can be natural or by-products from other industries, with an alkaline solution. These materials based on by-products from other industries have proven to be a less polluting alternative for concrete production than ordinary Portland cement (OPC). Geopolymers offer many advantages over OPC, such as excellent mechanical strength, increased durability, thermal resistance, and excellent stability in acidic and alkaline environments. Within these properties, mechanical strength, more specifically compressive strength, is the most important property for analyzing geopolymers as a construction material. For this reason, this study compiled information on the different variables that affect the compressive strength of geopolymers, such as Si/Al ratio, curing temperature and time, type and concentration of alkaline activator, water content, and the effect of impurities. From the information collected, it can be mentioned that geopolymers with Si/Al ratios between 1.5 and 2.0 obtained the highest compressive strengths for the different cases. On the other hand, high moderate temperatures (between 80 and 90 °C) induced higher compressive strengths in geopolymers, because the temperature favors the geopolymerization process. Moreover, longer curing times helped to obtain higher compressive strengths for all the cases analyzed. Furthermore, it was found that the most common practice is the use of sodium hydroxide combined with sodium silicate to obtain geopolymers with good mechanical strength, where the optimum SS/NaOH ratio depends on the source of aluminosilicates to be used. Generally speaking, it was observed that higher water contents lead to a decrease in compressive strength. The presence of calcium was found to be favorable in controlled proportions as it increases the compressive strength of geopolymers, on the other hand, impurities such as heavy metals have a negative effect on the compressive strength of geopolymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Nath, P., & Sarker, P. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.080 · Cited by 1,557
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Morandeau, A., Thiéry, M., & Dangla, P. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.015 · Cited by 1,114
Research works printed but not linked: 8
- 34. Rodríguez, E.; Mejía de Gutiérrez, R.; Bernal, S.; Gordillo, M. Effect of the S i O 2 /Al 2 O 3 and Na 2 O/S i O 2 ratios on the properties of geopolymers based on MK. Revista Facultad de Ingeniería Universidad de Antioquia 2009, 49, 30-41.
- 49. Lalitha, G.; Sasidhar, C.; Ramachandrudu, C. A review paper on strength and durability studies on concrete fine aggregate replaced with recycled crushed glass. Int. J. Civ. Eng. Technol. 2017, 8, 199-202.
- 78. Nagral, M.R.; Ostwal, T.; Chitawadagi, M.V. Effect Of Curing Temperature And Curing Hours On The Properties Of Geo-Polymer Concrete. Int. J. Comput. Eng. Res. 2014, 4, 2250-3005.
- 79. Manesh, S.B.; Madhukar, R.W.; Subhash, V.P. Effect of duration and temperature of curing on compressive strength of geopolymer concrete. Int. J. Eng. Innov. Technol. 2012, 1, 152-155.
- Janardhanan, 2016, Comparative study on the production cost of geopolymer and conventional concretes, Int. J. Civ. Eng. Res., 7, 117
- Nath, P., and Sarker, P. (2012, January 11–13). Geopolymer concrete for ambient curing condition. Proceedings of the Australasian Structural Engineering Conference, Perth, Australia.
- Budh, 2014, Effect of molarity on compressive strength of geopolymer mortar, Int. J. Civ. Eng. Res., 5, 2278
- Pavithra, P., Reddy, M.S., Dinakar, P., Rao, B.H., Satpathy, B.K., and Mohanty, A.N. (2016, January 14–18). Effect of the Na2SiO3/NaOH Ratio and NaOH Molarity on the Synthesis of Fly Ash-Based Geopolymer Mortar. Proceedings of the Geo-Chicago 2016, Chicago, IL, USA.
Cited by
A Review on Geopolymer Technology for Lunar Base Construction
Lee, S., & van Riessen, A. (2022) · Materials · doi:10.3390/ma15134516 · Cited by 45
Metadata
- Authors
- Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S.
- Affiliations
- Universidad Técnica Federico Santa María (CL)
- Universidad de Santiago de Chile (CL)
- Pontificia Universidad Católica de Valparaíso (CL)
- JRI Ingeniería, Santiago 7770445, Chile
- CIMS–JRI, Santiago 7850000, Chile
- Corresponding author
- Castillo, Hengels
- Venue
- Minerals
- Publisher
- MDPI AG
- Published
- 2021-11-25
- Volume
- 11
- Issue
- 12
- Pages
- 1317
- ISSN
- 2075-163X (ISSN-L)
- OpenAlex
- W3216835877
- Cited by
- 231
- References
- 202
- Citations by year
- 2026: 64 · 2025: 75 · 2024: 48 · 2023: 28 · 2022: 16
- FWCI
- 11.89
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Minerals (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Environmental Science › Environmental Engineering › Microbial Applications in Construction Materials
- Keywords
- geopolymer, compressive strength, Si/Al ratio, curing temperature, curing time, alkaline activator, sodium hydroxide, sodium silicate, moisture content, calcium content, heavy metal impurities, industrial by-products, aluminosilicate source, geopolymerization, cement replacement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Factors Affecting the Compressive Strength of Geopolymers: A Review. https://app.cochat.ai/papers/10.3390/min11121317
- The paper
- Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021). Factors Affecting the Compressive Strength of Geopolymers: A Review. Minerals. https://doi.org/10.3390/min11121317
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.