Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index; none of the 25 sources its claims cite is checked for support yet.

Autoignition Problem in Homogeneous Combustion Systems: GQL versus QSSA Combined with DRG

Open access

Abstract

The global quasi-linearization (GQL) is used as a method to study and to reduce the complexity of mathematical models of mechanisms of chemical kinetics. Similar to standard methodologies, such as the quasi-steady-state assumption (QSSA), the GQL method defines the fast and slow invariant subspaces and uses slow manifolds to gain a reduced representation. It does not require empirical inputs and is based on the eigenvalue and eigenvector decomposition of a linear map approximating the nonlinear vector field of the original system. In the present work, the GQL-based slow/fast decomposition is applied for different combustion systems. The results are compared with the standard QSSA approach. For this, an implicit implementation strategy described by differential algebraic equations (DAEs) systems is suggested and used, which allows for treating both approaches within the same computational framework. Hydrogen–air (with 9 species) and ethanol–air (with 57 species) combustion systems are considered representative examples to illustrate and verify the GQL. The results show that 4D GQL for hydrogen–air and 14D GQL ethanol–air slow manifolds outperform the standard QSSA approach based on a DAE-based reduced computation model.

Overview

CoChat Summary

TL;DR

The paper applies global quasi-linearization (GQL) to generate slow manifolds for homogeneous autoignition and compares it with QSSA and DRG-based reduction. Across a Davis-Skodje benchmark, hydrogen-air, and ethanol-air systems, GQL gives accurate low-dimensional reduced models, with 4D hydrogen and 14D ethanol examples outperforming QSSA at comparable or lower dimension.

Key findings

  • In the Davis-Skodje benchmark, for small time-scale separation (γ = 2.0) QSSA fails to predict the slow manifold accurately while GQL remains accurate and similar to ILDM; as γ increases to 10.0, all manifolds almost overlap.
  • For hydrogen-air, a 4D GQL reduced model optimized for isobaric conditions (p₀ = 1 bar, Φ = 1.0, 800 K ≤ T₀ ≤ 2000 K) with relative errors below 2% also works for higher pressures and other equivalence ratios, with relative errors growing to a maximum of around 8% at high initial temperatures; for isochoric conditions errors are well below 5%, whereas 4D QSSA with O and OH as QSS species gives high errors around 15% at high temperatures.
  • For ethanol-air, DRG reduces 57 species to 37 species; further reduction gives DRG-QSSA-23D and DRG-GQL-14D. The further QSSA/GQL reduction causes only additional 8% relative errors in the examples, much smaller than errors induced by DRG; DRG-QSSA-23D has lower relative errors than DRG-GQL-14D only because it has higher dimension, and at p₀ = 20 bar and Φ = 4.0 DRG-GQL-14D can also result in smaller relative errors than DRG-QSSA-23D.
  • The abstract and conclusions state that 4D GQL for hydrogen-air and 14D GQL ethanol-air slow manifolds outperform the standard QSSA approach based on a DAE-based reduced computation model.

Methods

  • GQL uses eigenvalue/eigenvector decomposition of a linear map approximating the nonlinear source term to define fast and slow invariant subspaces and a slow manifold where Z_f · F(ψ) = 0; it is implemented as a DAE system with a constant mass matrix Q_s, allowing comparison with QSSA in the same implicit framework.
  • Test systems: the Davis-Skodje model; a hydrogen-air homogeneous adiabatic reactor (11 dimensions: 2 thermodynamic parameters and 9 species) under isobaric and isochoric conditions; and an ethanol-air full mechanism (57 species), a DRG skeletal mechanism (37 species), then QSSA (23D) and GQL (14D) reductions.
  • Main analysis compares ignition delay times (IDT) and relative errors against detailed chemistry and across mechanisms (Warnatz, GRI3.0, ELTE-2014, O’Conaire, and Keromnes for hydrogen; ethanol isobaric cases at p = 1 bar, Φ = 0.5 and p = 20 bar, Φ = 4.0); GQL matrices are selected stochastically and validated against target quantities and tolerances using the in-house GQL_RedChem.

Limitations

  • The paper states that GQL reduced chemistry quality depends on the predefinition of the application range and target quantities; it can fail outside that range or for other target quantities and must be regenerated. T_GQL selection is stochastic, and a valid T_GQL may be valid only for a certain condition if the slow manifold dimension is low, with the valid range extending as dimension increases.
  • The paper notes that in the Davis-Skodje model the target quantity and user-defined errors are arbitrarily selected, and that hydrogen-air relative errors can be further reduced if the wider ranges are included in the optimization. The DRG skeletal mechanism itself causes large errors.
  • Evident from the text: the study is limited to homogeneous adiabatic reactors without convection or diffusion, and the demonstrations focus on autoignition/IDT target quantities for specific mechanisms and conditions.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/modelling4040027

Cites

21 of 21 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Time evolution ( left ) and phase plane ( right ) for g = 2.0.
Figure 1 Time evolution ( left ) and phase plane ( right ) for g = 2.0.CC-BY · From the PDF
Figure 2 Time evolution ( left ) and phase plane ( right ) for g = 5.0.
Figure 2 Time evolution ( left ) and phase plane ( right ) for g = 5.0.CC-BY · From the PDF
Figure 3 Time evolution ( left ) and phase plane ( right ) for g = 10.0.
Figure 3 Time evolution ( left ) and phase plane ( right ) for g = 10.0.CC-BY · From the PDF
Figure 4 Time evolution ( left ) and phase plane ( right ) for g = 2.0 together with 2 GQL candidates.
Figure 4 Time evolution ( left ) and phase plane ( right ) for g = 2.0 together with 2 GQL candidates.CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Figure 8 4D QSSA for the prediction of ignition delay times vs. initial temperature T 0 at p 0 = 1 bar and F = 4.0 for isochoric condition using the Warnatz mechanism, GRI3.0 mechanism, ELTE-2014 mechanism, O'Conaire mechanism, and Keromnes mechanism.
Figure 8 4D QSSA for the prediction of ignition delay times vs. initial temperature T 0 at p 0 = 1 bar and F = 4.0 for isochoric condition using the Warnatz mechanism, GRI3.0 mechanism, ELTE-2014 mechanism, O'Conaire mechanism, and Keromnes mechanism.CC-BY · From the PDF
Figure 9 Cont.
Figure 9 Cont.CC-BY · From the PDF
Figure 9 4D GQL for the prediction of the ignition delay times for an isochoric system using different mechanisms. Symbols: detailed chemistry; solid lines: 4D GQL reduced chemistry. Colors are the same as in Figure 7.
Figure 9 4D GQL for the prediction of the ignition delay times for an isochoric system using different mechanisms. Symbols: detailed chemistry; solid lines: 4D GQL reduced chemistry. Colors are the same as in Figure 7.CC-BY · From the PDF
Image 11
CC-BY · From the PDF
Image 12
CC-BY · From the PDF
Image 13
CC-BY · From the PDF

Verification

Claims the paper makes

0 Valid · 3 Not valid · 22 Not checked · 53 Own results and interpretations

48 more claims

Create a free account to see all 78 claims and to verify the 25 references still open.

See all claims — free account
  • It may state two separate claims as one. 12
  • Probably not a substantial claim. 12
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Citations

Cites

Show all 21 references

Research works printed but not linked: 4

  1. Warnatz, J., Maas, U., Dibble, R.W., and Warnatz, J. (2006). Combustion, Springer.
  2. Turns, S.R. (1996). Introduction to Combustion, McGraw-Hill Companies.
  3. Law, C.K. (2010). Combustion Physics, Cambridge University Press.
  4. Goussis, D.A., and Maas, U. (2011). Turbulent Combustion Modeling: Advances, New Trends and Perspectives, Springer.

Cited by

Still being checked.

Metadata

Authors
Yu, C., Shashidharan, S., Wu, S., Minuzzi, F., & Bykov, V.
Affiliations
  • Karlsruhe Institute of Technology (DE)
  • Universidade Federal de Santa Maria (BR)
Corresponding author
Yu, Chunkan
Venue
Modelling
Publisher
MDPI AG
Published
2023-10-25
Volume
4
Issue
4
Pages
470-484
ISSN
2673-3951 (ISSN-L)
OpenAlex
W4387937327
Cited by
0
References
21
FWCI
0.00
Type
journal article
Language
en
Open access
Locations
  • Modelling—International Open Access Journal of Modelling in Engineering Science (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • KITopen (cc-by)
Funders
Deutsche Forschungsgemeinschaft (DFG) (237267381)
Topics
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Advanced Combustion Engine Technologies
  • Physical Sciences › Engineering › Computational Mechanics › Combustion and flame dynamics
  • Physical Sciences › Physics and Astronomy › Statistical and Nonlinear Physics › Model Reduction and Neural Networks
Keywords
quasi-steady-state approximation, slow manifold, slow-fast decomposition, chemical kinetics reduction, differential-algebraic equations, homogeneous combustion, autoignition, hydrogen-air combustion, model reduction

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-19, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-19 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Autoignition Problem in Homogeneous Combustion Systems: GQL versus QSSA Combined with DRG. https://app.cochat.ai/papers/10.3390/modelling4040027
The paper
Yu, C., Shashidharan, S., Wu, S., Minuzzi, F., & Bykov, V. (2023). Autoignition Problem in Homogeneous Combustion Systems: GQL versus QSSA Combined with DRG. Modelling. https://doi.org/10.3390/modelling4040027

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.