Transport and Electrochemical Interface Properties of Ionomers in Low-Pt Loading Catalyst Layers: Effect of Ionomer Equivalent Weight and Relative Humidity
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Catalyst layer (CL) ionomers control several transport and interfacial phenomena including long-range transport of protons, local transport of oxygen to Pt catalyst, effective utilization of Pt catalyst, electrochemical reaction kinetics and double-layer capacitance. In this work, the variation of these properties, as a function of humidity, for CLs made with two ionomers differing in side-chain length and equivalent weight, Nafion-1100 and Aquivion-825, was investigated. This is the first study to examine humidity-dependent oxygen reduction reaction (ORR) kinetics in-situ for CLs with different ionomers. A significant finding is the observation of higher ORR kinetic activity (A/cm2Pt) for the Aquivion-825 CL than for the Nafion-1100 CL. This is attributed to differences in the interfacial protonic concentrations at Pt/ionomer interface in the two CLs. The differences in Pt/ionomer interface is also noted in a higher local oxygen transport resistance for Aquivion-825 CLs compared to Nafion-1100 CLs, consistent with stronger interaction between ionomer and Pt for ionomer with more acid groups. Similar dependency on Pt utilization (ratio of electrochemically active area at any relative humidity (RH) to that at 100% RH) as a function of RH is observed for the two CLs. As expected, strong influence of humidity on proton conduction is observed. Amongst the two, the CL with high equivalent weight ionomer (Nafion-1100) exhibits higher conduction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Three-dimensional analysis of Nafion layers in fuel cell electrodes
Lopez-Haro, M., Guétaz, L., Printemps, T., Morin, A., Escribano, S., Jouneau, P.-H., Bayle-Guillemaud, P., Chandezon, F., & Gebel, G. (2014) · Nature Communications · doi:10.1038/ncomms6229 · Cited by 402
Kodama, K., Motobayashi, K., Shinohara, A., Hasegawa, N., Kudo, K., Jinnouchi, R., Osawa, M., & Morimoto, Y. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03571 · Cited by 258 · cited 6×
“Recently, it has been identified that the chemical structure of ionomer dictates the chemical environment of the electrochemically active interface including poisoning by sulfonic group and ultimately affecting the oxygen reduction reaction (ORR) activity [7].”
BackgroundResultInfluentialPark, Y.-C., Kakinuma, K., Uchida, H., Watanabe, M., & Uchida, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.149 · Cited by 123 · cited 9×
“Decal transfer method was used to prepare an MEA.”
BackgroundMethodResultInfluentialDeCaluwe, S. C., Baker, A. M., Bhargava, P., Fischer, J. E., & Dura, J. A. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.008 · Cited by 122
Cited by
Designing the next generation of proton-exchange membrane fuel cells
Jiao, K., Xuan, J., Du, Q., Bao, Z., Xie, B., Wang, B., Zhao, Y., Fan, L., Wang, H., Hou, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-03482-7 · Cited by 2,947
Ramaswamy, N., Kumaraguru, S., Koestner, R., Fuller, T., Gu, W., Kariuki, N., Myers, D., Dudenas, P. J., & Kusoglu, A. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abe5eb · Cited by 62
Influence of Ionomer Content in the Catalytic Layer of MEAs Based on Aquivion® Ionomer
Gatto, I., Saccà, A., Sebastián, D., Baglio, V., Aricò, A. S., Oldani, C., Merlo, L., & Carbone, A. (2021) · Polymers · doi:10.3390/polym13213832 · Cited by 19
Metadata
- Authors
- Poojary, S., Islam, M. N., Shrivastava, U. N., Roberts, E. P. L., & Karan, K.
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2020-07-26
- Volume
- 25
- Issue
- 15
- Pages
- 3387
- ISSN
- 1420-3049 (ISSN-L)
- OpenAlex
- W3044667607
- Cited by
- 43
- References
- 5
- FWCI
- 1.69
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.