Reviewing Performance Measures of the Die-Sinking Electrical Discharge Machining Process: Challenges and Future Scopes
The DOI matches its Crossref record; the references it cites are not checked yet.
Abstract
The most well-known and widely used non-traditional manufacturing method is electrical discharge machining (EDM). It is well-known for its ability to cut rigid materials and high-temperature alloys that are difficult to machine with traditional methods. The significant challenges encountered in EDM are high tool wear rate, low material removal rate, and high surface roughness caused by the continuous electric spark generated between the tool and the workpiece. Researchers have reported using a variety of approaches to overcome this challenge, such as combining the die-sinking EDM process with cryogenic treatment, cryogenic cooling, powder-mixed processing, ultrasonic assistance, and other methods. This paper examines the results of these association techniques on various performance measures, such as material removal rate (MRR), tool wear rate (TWR), surface roughness, surface integrity, and recast layer formed during machining, and identifies potential gap areas and proposes a solution. The manuscript is useful for improving performance and introducing new resolutions to the field of EDM machining.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
The citation lists haven’t been fetched yet
Cited by 53
Research works printed but not linked: 132
- Mordecai, 1995, Developments in spark erosion of ceramics, Br. Ceram. Trans., 94, 21
- Zhang, 1997, Study on the electro-discharge machining of a hot-pressed aluminum oxide-based ceramic, J. Mater. Processing Technol., 63, 908, 10.1016/S0924-0136(96)00012-X · doi:10.1016/s0924-0136(96)00012-x
- Kunieda, 1997, Electrical Discharge Machining in Gas, CIRP Ann., 46, 143, 10.1016/S0007-8506(07)60794-X · doi:10.1016/s0007-8506(07)60794-x
- Kunieda, 2001, High Precision Finish Cutting by Dry WEDM, CIRP Ann., 50, 121, 10.1016/S0007-8506(07)62085-X · doi:10.1016/s0007-8506(07)62085-x
- Kunieda, 2003, High-Speed 3D Milling by Dry EDM, CIRP Ann., 52, 147, 10.1016/S0007-8506(07)60552-6 · doi:10.1016/s0007-8506(07)60552-6
- Furudate, 2002, Gap Phenomena in Dry WEDM, Denki-Kakou-Gijutsu, 26, 21
- Wong, 1995, Effects of Flushing on electro-discharge Machined Surfaces, J. Mater. Processing Technol., 48, 299, 10.1016/0924-0136(94)01662-K · doi:10.1016/0924-0136(94)01662-k
- Godinho, L.H.H., and Noble, C.F. (1977, January 21–24). The Use of Water as inter-electrode Medium in Pulsed EDM. Proceedings of the Fifth International Symposium for Electro-Machining, ISEM 6, Wolfsberg, Switzerland.
- Masuzawa, T. (1981). Machining Characteristics of EDM Using Water as a Dielectric Fluid. Proceedings of the Twenty-Second Machine Tool Design and Research Conference, Macmillan Education. · doi:10.1007/978-1-349-06281-2_55
- Jilam, 1984, Experimental Investigations Into the Performance of Water as Dielectric in EDM, Int. J. Mach. Tool Des. Res., 24, 31, 10.1016/0020-7357(84)90044-1 · doi:10.1016/0020-7357(84)90044-1
- Masuzawa, 1983, Water-based Dielectric Solution for EDM, CIRP Ann., 32, 119, 10.1016/S0007-8506(07)63374-5 · doi:10.1016/s0007-8506(07)63374-5
- Singh, 2004, Some investigations into the electric discharge machining of hardened tool steel using different electrode materials, J. Mater. Processing Technol., 149, 272, 10.1016/j.jmatprotec.2003.11.046 · doi:10.1016/j.jmatprotec.2003.11.046
- Sen, B., Kiyawat, N., Singh, P.K., Mitral, S., Ykmd, J.H., and Purkait, P. (2003, January 17–20). Developments in Electric Power Supply Configurations for Electrical-Discharge-Machining (EDM). Proceedings of the Fifth International Conference on Power Electronics and Drive Systems, 2003. PEDS 2003, Singapore.
- Wong, 2003, Investigation of Micro-EDM Material Removal Characteristics Using Single RC-Pulse Discharges, J. Mater. Processing Technol., 140, 303, 10.1016/S0924-0136(03)00771-4 · doi:10.1016/s0924-0136(03)00771-4
- Lee, 2003, Relationship between EDM parameters and surface crack formation, J. Mater. Processing Technol., 142, 676, 10.1016/S0924-0136(03)00688-5 · doi:10.1016/s0924-0136(03)00688-5
- Guu, 2007, Effect of machining parameters on surface textures in EDM of Fe-Mn-Al alloy, Mater. Sci. Eng., 466, 61, 10.1016/j.msea.2007.02.035 · doi:10.1016/j.msea.2007.02.035
- Kiyak, 2007, Examination of machining parameters on surface roughness in EDM of tool steel, J. Mater. Processing Technol., 191, 141, 10.1016/j.jmatprotec.2007.03.008 · doi:10.1016/j.jmatprotec.2007.03.008
- Lee, 1988, Quantification of surface damage of tool steels after EDM, Int. J. Mach. Tools Manuf., 28, 359, 10.1016/0890-6955(88)90050-8 · doi:10.1016/0890-6955(88)90050-8
- Rebelo, 1998, Influence of EDM Pulse Energy on The Surface Integrity of Martensitic Steels, J. Mater. Processing Technol., 84, 90, 10.1016/S0924-0136(98)00082-X · doi:10.1016/s0924-0136(98)00082-x
- Luo, 1998, An Investigation into The Actual EDM Off-Time In SEA Machining, J. Mater. Processing Technol., 74, 61, 10.1016/S0924-0136(97)00250-1 · doi:10.1016/s0924-0136(97)00250-1
- Konig, 1988, EDM-future steps towards the machining of ceramics, CIRP Ann., 37, 623, 10.1016/S0007-8506(07)60759-8 · doi:10.1016/s0007-8506(07)60759-8
- Chen, 2002, Analysis of electro-discharge machining process and its comparison with experiments, J. Mater. Processing Technol., 104, 150, 10.1016/S0924-0136(00)00531-8 · doi:10.1016/s0924-0136(00)00531-8
- Pawade, 2013, A brief review of die sinking electrical discharging machining process towards automation, Am. J. Mech. Eng., 1, 43, 10.12691/ajme-1-2-4 · doi:10.12691/ajme-1-2-4
- Abdulkareem, 2010, Cooling effect on electrode and process parameters in EDM, Mater. Manuf. Processes, 25, 462, 10.1080/15394450902996619 · doi:10.1080/15394450902996619
- Choudhary, 2017, Effect of Cryogenic Treatment of Tool Electrode on the Machining Performance and Surface Finish during Electrical Discharge Machining of Hastelloy C-4, Mater. Today Proc., 4, 1158, 10.1016/j.matpr.2017.01.132 · doi:10.1016/j.matpr.2017.01.132
- Gopalakannan, 2013, A parametric study of electrical discharge machining process parameters on machining of cast Al/B4C metal matrix nanocomposites, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 227, 993, 10.1177/0954405413479505 · doi:10.1177/0954405413479505
- Khanra, 2007, Performance of ZrB2–Cu composite as an EDM electrode, J. Mater. Processing Technol., 183, 122, 10.1016/j.jmatprotec.2006.09.034 · doi:10.1016/j.jmatprotec.2006.09.034
- Kumar, 2017, Parametric optimization of powder mixed electrical discharge machining for nickel-based super alloy Inconel-800 using response surface methodology, Mech. Adv. Mater. Mod. Processes, 3, 7, 10.1186/s40759-017-0022-4 · doi:10.1186/s40759-017-0022-4
- Kuppan, 2017, Performance evaluation of electrode materials in electric discharge deep hole drilling of Inconel 718 superalloy, Procedia Eng., 174, 53, 10.1016/j.proeng.2017.01.141 · doi:10.1016/j.proeng.2017.01.141
- Dewangan, 2015, Multi-response optimization of surface integrity characteristics of EDM process using grey-fuzzy logic-based hybrid approach, Eng. Sci. Technol. Int. J., 18, 361
- Mohanty, 2014, An experimental investigation of machinability of Inconel 718 in electrical discharge machining, Procedia Mater. Sci., 6, 605, 10.1016/j.mspro.2014.07.075 · doi:10.1016/j.mspro.2014.07.075
- Rahman, 2012, Modeling of machining parameters of Ti-6Al-4V for electric discharge machining: A neural network approach, Sci. Res. Essays, 7, 881, 10.5897/SRE10.1116 · doi:10.5897/sre10.1116
- Rajesha, 2012, On electro-discharge machining of Inconel 718 with the hollow tool, J. Mater. Eng. Perform., 21, 882, 10.1007/s11665-011-9962-8 · doi:10.1007/s11665-011-9962-8
- Kuppan, 2011, Effect of process parameters on the material removal rate and surface roughness in electric discharge drilling of Inconel 718 using graphite electrode, Int. J. Manuf. Technol. Manag., 23, 214, 10.1504/IJMTM.2011.045509 · doi:10.1504/ijmtm.2011.045509
- Mohanty, 2017, An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm, Eng. Sci. Technol. Int. J., 20, 552
- Kuppan, 2008, Influence of EDM process parameters in deep-hole drilling of Inconel 718, Int. J. Adv. Manuf. Technol., 38, 74, 10.1007/s00170-007-1084-y · doi:10.1007/s00170-007-1084-y
- Mohan, 2004, Electric discharge machining of Al-SiC metal matrix composites using rotary tube electrode, J. Mater. Processing Technol., 153–154, 978, 10.1016/j.jmatprotec.2004.04.347 · doi:10.1016/j.jmatprotec.2004.04.347
- Pradhan, 2009, Investigation of electro-discharge micro-machining of titanium super alloy, Int. J. Adv. Manuf. Technol., 41, 1094, 10.1007/s00170-008-1561-y · DOI
- Yan, 1999, The machining characteristics of Al2O3/6061Al composite using rotary electro-discharge machining with a tube electrode, J. Mater. Processing Technol., 95, 222, 10.1016/S0924-0136(99)00322-2 · doi:10.1016/s0924-0136(99)00322-2
- Majumder, 2014, An approach to optimize the EDM process parameters using desirability-based multi-objective PSO, Prod. Manuf. Res., 2, 228
- Mohanty, 2016, A particle swarm approach for multi-objective optimization of the electrical discharge machining process, J. Intell. Manuf., 27, 1171, 10.1007/s10845-014-0942-3 · doi:10.1007/s10845-014-0942-3
- Kapoor, 2012, Effect of cryogenic treated brass wire electrode on material removal rate in wire electrical discharge machining, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 226, 2750, 10.1177/0954406212438804 · doi:10.1177/0954406212438804
- Gill, 2010, Effect of deep cryogenic treatment on machinability of titanium alloy (Ti-6246) in electric discharge drilling, Mater. Manuf. Processes, 25, 378, 10.1080/10426910903179914 · doi:10.1080/10426910903179914
- Kumar, 2017, Machining process parameter and surface integrity in conventional EDM and cryogenic EDM of Al–SiCp MMC, J. Manuf. Processes, 20, 70, 10.1016/j.jmapro.2015.07.007 · doi:10.1016/j.jmapro.2015.07.007
- Pandey, 2018, Some studies using cryogenically treated Rotary Cu-tool electrode Electrical Discharge Machining, Mater. Today Proc., 5, 7635, 10.1016/j.matpr.2017.11.438 · doi:10.1016/j.matpr.2017.11.438
- Srivastava, 2012, Effect of process parameters on the performance of EDM process with ultrasonic assisted cryogenically cooled electrode, J. Manuf. Processes, 14, 393, 10.1016/j.jmapro.2012.05.001 · doi:10.1016/j.jmapro.2012.05.001
- Kumar, 2015, A mathematical model to predict material removal rate during electric discharge machining of cryogenically treated titanium alloys, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 229, 214, 10.1177/0954405414527955 · doi:10.1177/0954405414527955
- Chaudhari, 2012, The advanced technology of cryo processing for the enhancement of tool material machining characteristics: A Review, Int. J. Emerg. Technol. Adv. Eng., 2, 1
- Molinari, 2001, Effect of deep cryogenic treatment on the mechanical properties of tool steels, J Mater. Process.Technol., 118, 350, 10.1016/S0924-0136(01)00973-6 · doi:10.1016/s0924-0136(01)00973-6
- Uygur, 2015, A review of cryogenic treatment on cutting tools, Int. J. Adv. Manuf. Technol., 78, 1609, 10.1007/s00170-014-6755-x · DOI · Paper page
- Talla, 2015, Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminum/alumina metal matrix composite, Eng. Sci. Technol. Int. J., 18, 369
- Kolli, 2015, Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method, Eng. Sci. Technol. Int. J., 18, 524
- Kansal, 2007, Effect of silicon powder mixed EDM on machining rate of AISI D2 die steel, J. Manuf. Process., 9, 13, 10.1016/S1526-6125(07)70104-4 · doi:10.1016/s1526-6125(07)70104-4
- Singh, 2012, Optimization of abrasive powder mixed EDM of aluminum matrix composites with multiple responses using Gray relational analysis, J. Mater. Eng. Perform., 21, 481, 10.1007/s11665-011-9861-z · doi:10.1007/s11665-011-9861-z
- Kumar, 2011, Role of powder in the machining of Ale10%Sicp metal matrix composites by powder mixed electric discharge machining, J. Compos. Mater., 45, 133, 10.1177/0021998310371543 · doi:10.1177/0021998310371543
- Ming, 1995, Powder-Suspension Dielectric Fluid for EDM, J. Mater. Process. Technol., 52, 44, 10.1016/0924-0136(94)01442-4 · doi:10.1016/0924-0136(94)01442-4
- Narumiya, H., Mohri, N., Saito, N., Otake, H., Tsunekawa, Y., Takawashi, T., and Kobayashe, K. (2015, January 7–9). EDM by Powder Suspended Working Fluid. Proceedings of the 9th International Symposium for Electrical Machining, Bucharest, Romania.
- 2005, Effect of Powder Mixed Dielectric on Machining Performance in Electric Discharge Machining (EDM), GUU J. Sci., 18, 211
- Tzeng, 2001, Effects of Powder Characteristics on Electro- Discharge Machining Efficiency, Int. J. Adv. Manuf. Technol., 17, 586, 10.1007/s001700170142 · doi:10.1007/s001700170142
- Chow, 2000, Study of Added Powder in Kerosene for the Micro-slit Machining of Titanium Alloy using Electro-discharge Machining, J. Mater. Processing Technol., 101, 95103, 10.1016/S0924-0136(99)00458-6 · doi:10.1016/s0924-0136(99)00458-6
- Uno, 1998, Surface Modification by EDM with Nickel Powder Mixed Fluid, Int. J. Electr. Mach., 4, 4752
- Kremer, 1989, Effects of Ultrasonic Vibrations on the Performances in EDM, CIRP Ann.-Manuf. Technol., 38, 199, 10.1016/S0007-8506(07)62684-5 · doi:10.1016/s0007-8506(07)62684-5
- Abdullah, 2007, Effect of ultrasonic vibration of tool on electrical discharge machining of cemented tungsten carbide (WC-Co), Int. J. Adv. Manuf. Technol., 38, 1137, 10.1007/s00170-007-1168-8 · doi:10.1007/s00170-007-1168-8
- Lin, 2000, Machining characteristics of titanium alloy(Ti-6Al-4V) using a combination process of EDM with USM, J. Mater. Process. Technol., 104, 171, 10.1016/S0924-0136(00)00539-2 · DOI
- Jia, 1995, Combined machining of USM and EDM for advanced ceramics, J. Adv. Mater., 26, 16
- Nikzad, M. (2004). Ultrasonic Assisted Electro Discharge Machining. [Ph.D. Thesis, Amirkabir University of Technology].
- Wansheng, 2002, Ultrasonic and electric discharge machining to deep and small hole on titanium alloy, J. Mater. Processing Technol., 120, 101, 10.1016/S0924-0136(01)01149-9 · doi:10.1016/s0924-0136(01)01149-9
- Yan, 2002, Study of precision micro-holes in borosilicate glass using micro EDM combined with micro ultrasonic vibration machining, Int. J. Mach. Tools Manuf., 42, 1105, 10.1016/S0890-6955(02)00061-5 · doi:10.1016/s0890-6955(02)00061-5
- Ghoreishi, 2002, A comparative experimental study of machining characteristics in vibratory, rotary and vibro-rotary electro-discharge machining, J. Mater. Processing Technol., 120, 374, 10.1016/S0924-0136(01)01160-8 · doi:10.1016/s0924-0136(01)01160-8
- Shabgard, 2009, The effect of ultrasonic vibration of work piece in electrical discharge machining of AISIH13 tool steel, World Acad. Sci. Eng. Technol., 3, 332
- Huang, 2003, Ultrasonic vibration assisted electro-discharge machining of microholes in Nitinol, J. Micromechanics Microengineering, 13, 693, 10.1088/0960-1317/13/5/322 · doi:10.1088/0960-1317/13/5/322
- Lee, 1998, Machining of engineering ceramics by ultrasonic vibration assisted EDM method, Mater. Manuf. Process., 13, 133, 10.1080/10426919808935224 · doi:10.1080/10426919808935224
- Yu, 2011, Productivity of EDM process assisted by ultrasonic waves, Solid State Phenomena, Volume 175, 157, 10.4028/www.scientific.net/SSP.175.157 · doi:10.4028/www.scientific.net/ssp.175.157
- Murti, 1987, An analysis of the debris in ultrasonic-assisted electrical discharge machining, Wear, 117, 241, 10.1016/0043-1648(87)90258-4 · doi:10.1016/0043-1648(87)90258-4
- Thoe, 1999, Combined ultrasonic and electrical discharge machining of ceramic coated nickel alloy, J. Mater. Processing Technol., 92, 323, 10.1016/S0924-0136(99)00117-X · DOI
- Zhixin, 1997, Study on a new kind of combined machining technology of ultrasonic machining and electrical discharge machining, Int. J. Mach. Tools Manuf., 37, 193, 10.1016/S0890-6955(96)00048-X · doi:10.1016/s0890-6955(96)00048-x
- Straka, 2018, Optimization of material removal rate and tool wear rate of Cu electrode in die-sinking EDM of tool steel, Int. J. Adv. Manuf. Technol., 97, 2647, 10.1007/s00170-018-2150-3 · doi:10.1007/s00170-018-2150-3
- Amorim, 2007, The behavior of graphite and copper electrodes on the finish die-sinking electrical discharge machining (EDM) of AISI P20 tool steel, J. Braz. Soc. Mech. Sci. Eng., 29, 366, 10.1590/S1678-58782007000400004 · doi:10.1590/s1678-58782007000400004
- Khan, 2008, Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes, Int. J. Adv. Manuf. Technol., 39, 482, 10.1007/s00170-007-1241-3 · doi:10.1007/s00170-007-1241-3
- Zarepour, 2007, Statistical analysis on electrode wear in EDM of tool steel DIN 1.2714 used in forging dies, J. Mater. Process. Technol., 187–188, 711, 10.1016/j.jmatprotec.2006.11.202 · doi:10.1016/j.jmatprotec.2006.11.202
- Wang, 2001, Semiempirical model on work removal and tool wear in electrical discharge machining, J. Mater. Process. Technol., 114, 1, 10.1016/S0924-0136(01)00733-6 · doi:10.1016/s0924-0136(01)00733-6
- Khan, 2006, Performance of copper and aluminum electrode during EDM of stainless steel and carbide, Int. J. Manuf. Sci. Prod., 7, 1
- Zaw, 1999, Fabrication of a new EDM electrode material using sintering techniques, J. Mater. Process. Technol., 89–90, 182, 10.1016/S0924-0136(99)00054-0 · doi:10.1016/s0924-0136(99)00054-0
- Puertas, 2004, Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC-Co, J. Mater. Process. Technol., 153–154, 1026, 10.1016/j.jmatprotec.2004.04.346 · doi:10.1016/j.jmatprotec.2004.04.346
- Kunieda, 2004, Clarifying mechanism of determining tool electrode wear ratio in EDM using spectroscopic measurement of vapor density, J. Mater. Process. Technol., 149, 284, 10.1016/j.jmatprotec.2004.02.022 · doi:10.1016/j.jmatprotec.2004.02.022
- Franco, 2017, Experimental study of tool degradation in EDM processes: Electrode material loss at the border and central zones, Int. J. Adv. Manuf. Technol., 95, 3497
- Shabgard, 2015, Investigation of the effect of thermal diffusivity coefficient of tool material on electrode-tool Wear in the EDM process, Arch. Civil. Mech. Eng., 15, 806, 10.1016/j.acme.2015.06.009 · doi:10.1016/j.acme.2015.06.009
- Kiyak, 2015, Effects of discharge energy density on wear rate and surface roughness in EDM, Int. J. Adv. Manuf. Technol., 79, 513, 10.1007/s00170-015-6840-9 · doi:10.1007/s00170-015-6840-9
- Puthumana, 2017, Modeling of the effect of tool wear per discharge estimation error on the depth of machined cavities in micro-EDMmilling, Int. J. Adv. Manuf. Technol., 92, 3253, 10.1007/s00170-017-0371-5 · doi:10.1007/s00170-017-0371-5
- Venugopal, 2017, Fabrication of differently shaped tool electrodes for micro-EDM, J. Mater. Sci. Surf. Eng., 5, 641
- Torres, 2015, Analysis of the influence of EDM parameters on surface finish, material removal rate, and electrode wear of an INCONEL 600 alloy, Int. J. Adv. Manuf. Technol., 80, 123, 10.1007/s00170-015-6974-9 · DOI
- Torres, 2017, EDM machinability and surface roughness analysis of TiB2 using copper electrodes, J. Alloys Comp., 690, 337, 10.1016/j.jallcom.2016.08.110 · doi:10.1016/j.jallcom.2016.08.110
- Uhlmann, 2016, Automated dressing of graphite electrodes for electrical discharge machining (EDM) of seal slots in turbine components, Proc. Manuf., 6, 45
- Wildner, 2017, Multifilament carbon fibre tool electrodes in micro EDM—Evaluation of process performance based on influence of input parameters, Int. J. Adv. Manuf. Technol., 91, 3737, 10.1007/s00170-017-0041-7 · doi:10.1007/s00170-017-0041-7
- Barenji, 2016, Electrical discharge machining of the AISI D6 tool steel: Prediction and modeling of the material removal rate and tool wear ratio, Prec. Eng., 45, 435, 10.1016/j.precisioneng.2016.01.012 · doi:10.1016/j.precisioneng.2016.01.012
- Haque, 2021, Comparative study of parametric effects on the performance of simple and powder mixed EDM using aluminium and graphite powder on Inconel X750 alloy, Mater. Today Proc., 46, 8366, 10.1016/j.matpr.2021.03.419 · doi:10.1016/j.matpr.2021.03.419
- Kumar, 2015, Experimental investigation of the process parameters in cryogenic cooled electrode in EDM, J. Mech. Sci. Technol., 29, 3865, 10.1007/s12206-015-0832-4 · doi:10.1007/s12206-015-0832-4
- 2015, Wear Properties of Cryogenic Treated Electrodes on Machining of En-31, Mater. Today Proc., 2, 1406, 10.1016/j.matpr.2015.07.060 · doi:10.1016/j.matpr.2015.07.060
- Kumar, 2017, Effect of cryogenically treated copper-tungsten electrode on tool wear rate during electro-discharge machining of Ti-5Al-2.5 Sn alloy, Wear, 386, 223, 10.1016/j.wear.2017.01.067 · doi:10.1016/j.wear.2017.01.067
- Mathai, V.J., Vaghela, R.V., Dave, H.K., Raval, H.K., and Desai, K.P. (2013, January 13–15). Study of the Effect of Cryogenic Treatment of Tool Electrodes during Electro Discharge Machining. Proceedings of the Eighth International Conference on Precision Meso, Micro & Nano Engineering (COPEN-8: 2013) At: National Institute of Technology, Calicut, India.
- Shastri, 2019, Study of the Effect of Cryogenically treated tools during Rapid Drill Electro-discharge machining of Ti-6Al-4V alloy, Mater. Today: Proc., 18, 3122
- Franco, 2006, Performance of cryogenically treated HSS tools, Wear, 261, 674, 10.1016/j.wear.2006.01.017 · doi:10.1016/j.wear.2006.01.017
- Kumar, 2012, Machining efficiency evaluation of cryogenically treated copper electrode in additive mixed EDM, Mater. Manuf. Processes, 27, 1051, 10.1080/10426914.2011.654151 · doi:10.1080/10426914.2011.654151
- Kumar, 2017, Modeling the tool wear rate in powder mixed electro-discharge machining of titanium alloys using dimensional analysis of cryogenically treated electrodes and work piece, Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., 231, 271, 10.1177/0954408915593875 · doi:10.1177/0954408915593875
- Sundaram, M.M., Yildiz, Y., and Rajurkar, K.P. (2009, January 4–7). Experimental study of the effect of cryogenic treatment on the performance of electro discharge machining. Proceedings of the ASME 2009 International Manufacturing Science and Engineering Conference, West Lafayette, IN, USA. · doi:10.1115/msec2009-84247
- Guu, 2003, Effect of electrical discharge machining on surface characteristics and machining damage of AISI D2 tool steel, Mater. Sci. Eng. A, 358, 37, 10.1016/S0921-5093(03)00272-7 · doi:10.1016/s0921-5093(03)00272-7
- Rahul, 2018, Analysis on surface characteristics of electro-discharge machined Inconel 718, Int. J. Mater. Prod. Technol., 56, 135, 10.1504/IJMPT.2018.089121 · doi:10.1504/ijmpt.2018.089121
- Bhattacharyya, 2007, Modelling and analysis of EDM ED job surface integrity, J. Mater. Processing Technol., 189, 169, 10.1016/j.jmatprotec.2007.01.018 · doi:10.1016/j.jmatprotec.2007.01.018
- Keskin, 2006, An experimental study for determination of the effects of machining parameters on surface roughness in electrical discharge machining (EDM), Int. J. Adv. Manuf. Technol., 28, 1118, 10.1007/s00170-004-2478-8 · doi:10.1007/s00170-004-2478-8
- Lee, 2000, Characteristic analysis of EDMed surfaces using the Taguchi approach, Mater. Manuf. Processes, 15, 781, 10.1080/10426910008913021 · DOI
- Liao, 2004, A study to achieve a fine surface finish in wire-EDM, J. Mater. Processing Technol., 149, 165, 10.1016/j.jmatprotec.2003.10.034 · doi:10.1016/j.jmatprotec.2003.10.034
- Mandal, 2017, Improvement of surface integrity of Nimonic C 263 super alloy produced by WEDM through various post-processing techniques, Int. J. Adv. Manuf. Technol., 93, 433, 10.1007/s00170-017-9993-x · DOI
- Aspinwall, 2008, Work piece surface roughness and integrity after WEDM of Ti– 6Al–4V and Inconel 718 using minimum damage generator technology, CIRP Ann., 57, 187, 10.1016/j.cirp.2008.03.054 · DOI
- Bleys, 2006, Surface and Sub-Surface Quality of Steel after EDM, Adv. Eng. Mater., 8, 15, 10.1002/adem.200500211 · doi:10.1002/adem.200500211
- Goyal, 2017, Investigating the surface properties of EN-31 die-steel after machining with powder metallurgy EDM electrodes, Mater. Today: Proc., 4, 3694
- Li, 2015, Machining characteristics of Inconel 718 by sinking-EDM and wire-EDM, Mater. Manuf. Processes, 30, 968, 10.1080/10426914.2014.973579 · doi:10.1080/10426914.2014.973579
- Venkaiah, 2015, Parametric optimization in machining of Nimonic-263 alloy using RSM and particle swarm optimization, Procedia Mater. Sci., 10, 70, 10.1016/j.mspro.2015.06.027 · doi:10.1016/j.mspro.2015.06.027
- Datta, 2017, A novel satisfaction function and distance-based approach for machining performance optimization during electro-discharge machining on super alloy Inconel 718, Arab. J. Sci. Eng., 42, 1999, 10.1007/s13369-017-2422-5 · DOI
- Shastri, 2019, Machinability investigation on Nimonic C263 alloy in electric discharge machine, Mater. Today Proc., 26, 529, 10.1016/j.matpr.2019.12.133 · doi:10.1016/j.matpr.2019.12.133
- Zhang, 2018, Analysis and optimization of process energy consumption and environmental impact in electrical discharge machining of titanium superalloys, J. Clean. Prod., 198, 833, 10.1016/j.jclepro.2018.07.053 · doi:10.1016/j.jclepro.2018.07.053
- Shastri, 2021, Sustainable Electrical Discharge Machining of Nimonic C263 Superalloy, Arab. J. Sci. Eng., 46, 7273, 10.1007/s13369-020-05211-0 · doi:10.1007/s13369-020-05211-0
- Rajhi, 2021, A contribution to numerical prediction of surface damage and residual stresses on die-sinking EDM of Ti6Al4V, J. Manuf. Processes., 68, 1458, 10.1016/j.jmapro.2021.06.056 · doi:10.1016/j.jmapro.2021.06.056
- Pei, 2021, Oxidation behavior of recast layer of air-film hole machined by EDM technology of Ni-based single crystal blade and its effect on creep strength, Surf. Coat. Technol., 419, 127285, 10.1016/j.surfcoat.2021.127285 · doi:10.1016/j.surfcoat.2021.127285
- Li, 2019, Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy, J. Alloys Compd., 783, 95, 10.1016/j.jallcom.2018.12.283 · doi:10.1016/j.jallcom.2018.12.283
- Xavior, 2018, Effect of recast layer thickness on the mechanical characteristics of INCONEL 718 machined by spark EDM process, Mater. Today Proc., 5, 8249, 10.1016/j.matpr.2017.11.515 · doi:10.1016/j.matpr.2017.11.515
- Reddy, 2021, Multi-objective optimization of surface roughness, recast layer thickness and surface crack density in WEDM of Al2124/SiCp using desirability approach, Mater. Today Proc., 39, 1320, 10.1016/j.matpr.2020.04.563 · doi:10.1016/j.matpr.2020.04.563
- Sahu, 2018, Multi-objective optimisation of EDM process using ANN integrated with NSGA-II algorithm, Int. J. Manuf. Technol. Manag., 32, 381, 10.1504/IJMTM.2018.093356 · doi:10.1504/ijmtm.2018.093356
- Kumar, 2018, GA-based optimisation using RSM in WEDM of Nimonic-90: A nickel-based super alloy, Int. J. Ind. Syst. Eng., 28, 53
- Gostimirovic, 2018, Evolutionary multi-objective optimization of energy efficiency in electrical discharge machining, J. Mech. Sci. Technol., 32, 4775, 10.1007/s12206-018-0925-y · doi:10.1007/s12206-018-0925-y
- Mandal, 2021, Multi-objective optimization of Cu-MWCNT composite electrode in electro discharge machining using MOPSO-TOPSIS, Measurement, 169, 108347, 10.1016/j.measurement.2020.108347 · doi:10.1016/j.measurement.2020.108347
- Sahoo, 2020, Experimental Investigation and Multi-Objective Optimization of Die sink EDM Process Parameters on Inconel-625 alloy by using Utility Function Approach, Mater. Today Proc., 24, 995, 10.1016/j.matpr.2020.04.412 · doi:10.1016/j.matpr.2020.04.412
- Kumari, 2020, Optimization of surface roughness in EDM of pure magnesium (Mg) using TLBO, Mater. Today Proc., 26, 2458, 10.1016/j.matpr.2020.02.523 · doi:10.1016/j.matpr.2020.02.523
Metadata
- Authors
- Shastri, R. K., Mohanty, C. P., Dash, S., Gopal, K. M. P., Annamalai, A. R., & Jen, C.-P.
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2022-01-25
- Volume
- 12
- Issue
- 3
- Pages
- 384
- ISSN
- 2079-4991
- Cited by
- 53
- Language
- en
- Funders
- Ministry of Science and Technology (MOST 109-2221-E-194 -011 -MY2)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reviewing Performance Measures of the Die-Sinking Electrical Discharge Machining Process: Challenges and Future Scopes. https://app.cochat.ai/papers/10.3390/nano12030384
- The paper
- Shastri, R. K., Mohanty, C. P., Dash, S., Gopal, K. M. P., Annamalai, A. R., & Jen, C.-P. (2022). Reviewing Performance Measures of the Die-Sinking Electrical Discharge Machining Process: Challenges and Future Scopes. Nanomaterials. https://doi.org/10.3390/nano12030384
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.