The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
Open accessAbstract
Three-dimensional printing (3DP) has demonstrated great potential for multi-material fabrication because of its capability for printing bespoke and spatially separated material conformations. Such a concept could revolutionise the pharmaceutical industry, enabling the production of personalised, multi-layered drug products on demand. Here, we developed a novel stereolithographic (SLA) 3D printing method that, for the first time, can be used to fabricate multi-layer constructs (polypills) with variable drug content and/or shape. Using this technique, six drugs, including paracetamol, caffeine, naproxen, chloramphenicol, prednisolone and aspirin, were printed with different geometries and material compositions. Drug distribution was visualised using Raman microscopy, which showed that whilst separate layers were successfully printed, several of the drugs diffused across the layers depending on their amorphous or crystalline phase. The printed constructs demonstrated excellent physical properties and the different material inclusions enabled distinct drug release profiles of the six actives within dissolution tests. For the first time, this paper demonstrates the feasibility of SLA printing as an innovative platform for multi-drug therapy production, facilitating a new era of personalised polypills.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fixed-Dose Combinations Improve Medication Compliance: A Meta-Analysis
Bangalore, S., Kamalakkannan, G., Parkar, S., & Messerli, F. H. (2007) · The American Journal of Medicine · doi:10.1016/j.amjmed.2006.08.033 · Cited by 1,075
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
Self-citationKhaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.09.028 · Cited by 606
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577
Self-citation3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Self-citationEmergence of 3D Printed Dosage Forms: Opportunities and Challenges
Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 554
Fonseca, V., Rosenstock, J., Patwardhan, R., & Salzman, A. (2000) · JAMA · doi:10.1001/jama.283.13.1695 · Cited by 540
Goyanes, A., Wang, J., Buanz, A., Martínez-Pacheco, R., Telford, R., Gaisford, S., & Basit, A. W. (2015) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00510 · Cited by 511
Self-citation3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Trenfield, S. J., Awad, A., Goyanes, A., Gaisford, S., & Basit, A. W. (2018) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2018.02.006 · Cited by 502
Self-citation
Cited by
Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies
Bhujbal, S. V., Mitra, B., Jain, U., Gong, Y., Agrawal, A., Karki, S., Taylor, L. S., Kumar, S., & (Tony) Zhou, Q. (2021) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2021.05.014 · Cited by 556
3D Printing as a Promising Tool in Personalized Medicine
Vaz, V. M., & Kumar, L. (2021) · AAPS PharmSciTech · doi:10.1208/s12249-020-01905-8 · Cited by 409
Connected healthcare: Improving patient care using digital health technologies
Awad, A., Trenfield, S. J., Pollard, T. D., Ong, J. J., Elbadawi, M., McCoubrey, L. E., Goyanes, A., Gaisford, S., & Basit, A. W. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113958 · Cited by 405
Self-citationVat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Self-citationAzad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020124 · Cited by 356
Metadata
- Authors
- Robles-Martinez, P., Xu, X., Trenfield, S. J., Awad, A., Goyanes, A., Telford, R., Basit, A. W., & Gaisford, S.
- Venue
- Pharmaceutics
- Publisher
- MDPI AG
- Published
- 2019-06-11
- Volume
- 11
- Issue
- 6
- Pages
- 274
- ISSN
- 1999-4923 (ISSN-L)
- OpenAlex
- W2950716533
- Cited by
- 358
- References
- 59
- FWCI
- 18.77
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method. https://app.cochat.ai/papers/10.3390/pharmaceutics11060274
- The paper
- Robles-Martinez, P., Xu, X., Trenfield, S. J., Awad, A., Goyanes, A., Telford, R., Basit, A. W., & Gaisford, S. (2019). 3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method. Pharmaceutics. https://doi.org/10.3390/pharmaceutics11060274
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.