The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Structural Changes of Oak Wood Main Components Caused by Thermal Modification
Open accessAbstract
Thermal modification of wood causes chemical changes that significantly affect the physical, mechanical and biological properties of wood; thus, it is essential to investigate these changes for better utilization of products. Fourier transform infrared spectroscopy and size exclusion chromatography were used for evaluation of chemical changes at thermal treatment of oak wood. Thermal modification was applied according to Thermowood process at the temperatures of 160, 180 and 210 °C, respectively. The results showed that hemicelluloses are less thermally stable than cellulose. Chains of polysaccharides split to shorter ones leading to a decrease of the degree of polymerization and an increase of polydispersity. At the highest temperature of the treatment (210 °C), also crosslinking reactions take place. At lower temperatures degradation reactions of lignin predominate, higher temperatures cause mainly condensation reactions and a molecular weight increase. Chemical changes in main components of thermally modified wood mainly affect its mechanical properties, which should be considered into account especially when designing various timber constructions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Classification of Lignins from Different Botanical Origins by FT-IR Spectroscopy
Faix, O. (1991) · Holzforschung · doi:10.1515/hfsg.1991.45.s1.21 · Cited by 1,276
Wood modification by heat treatment: A review
Esteves, B. M., & Pereira, H. M. (2008) · BioResources · doi:10.15376/biores.4.1.370-404 · Cited by 1,270
(1992) · Springer Series in Wood Science · doi:10.1007/978-3-642-74065-7 · Cited by 1,043
The mechanism for thermal decomposition of cellulose and its main products
Shen, D. K., & Gu, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.06.095 · Cited by 994
Structural analysis of photodegraded wood by means of FTIR spectroscopy
Colom, X., Carrillo, F., Nogués, F., & Garriga, P. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00051-x · Cited by 635
Prins, M. J., Ptasinski, K. J., & Janssen, F. J. J. G. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.01.001 · Cited by 615
Åkerholm, M., Hinterstoisser, B., & Salmén, L. (2004) · Carbohydrate Research · doi:10.1016/j.carres.2003.11.012 · Cited by 433
Characterisation of thermally modified hard- and softwoods by C CPMAS NMR
WIKBERG, H., & LIISAMAUNU, S. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.08.008 · Cited by 424
Detailed kinetic modeling of the thermal degradation of lignins
Faravelli, T., Frassoldati, A., Migliavacca, G., & Ranzi, E. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.10.018 · Cited by 376
Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen
Kocaefe, D., Poncsák, S., & Boluk, Y. (2008) · BioResources · doi:10.15376/biores.3.2.517-537 · Cited by 319
Chemical changes during the production of thermo-treated beech wood
Windeisen, E., Strobel, C., & Wegener, G. (2007) · Wood Science and Technology · doi:10.1007/s00226-007-0146-5 · Cited by 318
Weiland, J. J., & Guyonnet, R. (2003) · Holz als Roh- und Werkstoff · doi:10.1007/s00107-003-0364-y · Cited by 316
Chemical changes of heat treated Pine and Eucalypt wood monitored by FTIR
Esteves, B., Velez Marques, A., Domingos, I., & Pereira, H. (2014) · Maderas. Ciencia y Tecnología · doi:10.4067/s0718-221x2013005000020 · Cited by 287
Characterization and analysis of torrefied wood
Bourgois, J., & Guyonnet, R. (1988) · Wood Science and Technology · doi:10.1007/bf00355850 · Cited by 266
Thermal Modifications in Softwood Studied by FT‐IR and UV Resonance Raman Spectroscopies
Nuopponen, M., Vuorinen, T., Jämsä, S., & Viitaniemi, P. (2005) · Journal of Wood Chemistry and Technology · doi:10.1081/wct-120035941 · Cited by 263
Control of wood thermal treatment and its effects on decay resistance: a review
Candelier, K., Thevenon, M.-F., Petrissans, A., Dumarcay, S., Gerardin, P., & Petrissans, M. (2016) · Annals of Forest Science · doi:10.1007/s13595-016-0541-x · Cited by 247
Determination of Lignin Content ofEucalyptus globulusWood Using FTIR Spectroscopy
Rodrígues, J. C., Faix, O., & Pereira, H. (1998) · Holzforschung · doi:10.1515/hfsg.1998.52.1.46 · Cited by 244
Determination of chemical changes in heat-treated wood using ATR-FTIR and FT Raman spectrometry
Özgenç, Ö., Durmaz, S., Boyaci, I. H., & Eksi-Kocak, H. (2017) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2016.08.026 · Cited by 228
Effects of hemicellulose extraction on properties of wood flour and wood–plastic composites
Hosseinaei, O., Wang, S., Enayati, A. A., & Rials, T. G. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.01.007 · Cited by 201
Thermochemical behavior of Norway spruce ( Picea abies ) at 180-225 °C
Alén, R., Kotilainen, R., & Zaman, A. (2002) · Wood Science and Technology · doi:10.1007/s00226-001-0133-1 · Cited by 196
A Review of the Relationship Between Thermally-Accelerated Ageing of Paper and Hornification
Kato, K. L., & Cameron, R. E. (1999) · Cellulose · doi:10.1023/a:1009292120151 · Cited by 187
Popescu, M.-C., Froidevaux, J., Navi, P., & Popescu, C.-M. (2013) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2012.08.035 · Cited by 187
The effects of thermal modification on crystalline structure of cellulose in soft and hardwood
Yildiz, S., & Gümüşkaya, E. (2007) · Building and Environment · doi:10.1016/j.buildenv.2005.07.009 · Cited by 186
Pine wood modification by heat treatment in air
Esteves, B. M., Domingos, I. J., & Pereira, H. M. (2008) · BioResources · doi:10.15376/biores.3.1.142-154 · Cited by 184
On the effect of heat on the chemical composition and dimensions of thermally-modified wood
González-Peña, M. M., Curling, S. F., & Hale, M. D. C. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.09.003 · Cited by 168
Spiridon, I., Teacă, C.-A., & Bodîrlău, R. (2010) · BioResources · doi:10.15376/biores.6.1.400-413 · Cited by 159
Effects of thermal treatment on chemical, mechanical and colour traits in Norway spruce wood
Kačíková, D., Kačík, F., Čabalová, I., & Ďurkovič, J. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.06.110 · Cited by 159
Self-citationImpact of thermal modification on color and chemical changes of spruce and oak wood
Síkora, A., Kačík, F., Gaff, M., Vondrová, V., Bubeníková, T., & Kubovský, I. (2018) · Journal of Wood Science · doi:10.1007/s10086-018-1721-0 · Cited by 153
Self-citationWang, S., Ru, B., Dai, G., Sun, W., Qiu, K., & Zhou, J. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.04.098 · Cited by 150
Vartanian, E., Barrès, O., & Roque, C. (2014) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2014.10.011 · Cited by 150
Investigation of structural modification and thermal characteristics of lignin after heat treatment
Kim, J., Hwang, H., Oh, S., Kim, Y., Kim, U., & Choi, J. W. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.02.013 · Cited by 138
Chemical reactivity of heat-treated wood
Inari, G. N., Pétrissans, M., & Gérardin, P. (2006) · Wood Science and Technology · doi:10.1007/s00226-006-0092-7 · Cited by 122
Zhang, Y., Ma, Z., Zhang, Q., Wang, J., Ma, Q., Yang, Y., Luo, X., & Zhang, W. (2017) · BioResources · doi:10.15376/biores.12.3.4652-4669 · Cited by 121
Turner, I., Rousset, P. L. A., Rémond, R., & Perré, P. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.10.020 · Cited by 113
Comparative studies of thermal degradation between larch lignin and manchurian ash lignin
Li, J., Li, B., & Zhang, Y. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00172-6 · Cited by 94
Lin, B.-J., Colin, B., Chen, W., Pétrissans, A., Rousset, P. L. A., & Pétrissans, M. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.02.005 · Cited by 83
Okon, K. E., Lin, F., Chen, Y., & Huang, B. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.076 · Cited by 79
Applications of infrared photo-acoustic spectroscopy for wood samples
Kuo, M., McClelland, J. F., Luo, S., Chien, P. L., Walker, R. D., & Hse, C. (1988) · Wood and Fiber Science (Society of Wood Science and Technology) · Cited by 56
Discolouration of thermally modified wood during simulated indoor sunlight exposure
Miklečić, J., Jirouš-Rajković, V., Antonović, A., & Španić, N. (2010) · BioResources · doi:10.15376/biores.6.1.434-446 · Cited by 49
Changes in DRIFT spectra of wood irradiated by UV laser as a function of energy
Papp, G., Barta, E., Preklet, E., Tolvaj, L., Berkesi, O., Nagy, T., & Szatmári, S. (2005) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2005.01.012 · Cited by 36
Cited by
Influences of extractives and thermal modification on the UV resistance of Albizia lebbeck wood
Anish, M. C., Giridhar, B. N., Nair, S., Anantha, N. S., & Pandey, K. K. (2023) · Wood Material Science & Engineering · doi:10.1080/17480272.2022.2053586 · Cited by 20
Metadata
- Authors
- Kubovský, I., Kačíková, D., & Kačík, F.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2020-02-21
- Volume
- 12
- Issue
- 2
- Pages
- 485
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3008788121
- Cited by
- 289
- References
- 41
- FWCI
- 24.08
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.