Sustainable Micro and Nano Additives for Controlling the Migration of a Biobased Plasticizer from PLA-Based Flexible Films
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Plasticized poly(lactic acid) (PLA)/poly(butylene succinate) (PBS) blend-based films containing chitin nanofibrils (CN) and calcium carbonate were prepared by extrusion and compression molding. On the basis of previous studies, processability was controlled by the use of a few percent of a commercial acrylic copolymer acting as melt strength enhancer and calcium carbonate. Furthermore, acetyl n-tributyl citrate (ATBC), a renewable and biodegradable plasticizer (notoriously adopted in PLA based products) was added to facilitate not only the processability but also to increase the mechanical flexibility and toughness. However, during the storage of these films, a partial loss of plasticizer was observed. The consequence of this is not only correlated to the change of the mechanical properties making the films more rigid but also to the crystallization and development of surficial oiliness. The effect of the addition of calcium carbonate (nanometric and micrometric) and natural nanofibers (chitin nanofibrils) to reduce/control the plasticizer migration was investigated. The prediction of plasticizer migration from the films’ core to the external surface was carried out and the diffusion coefficients, obtained by regression of the experimental migration data plotted as the square root of time, were evaluated for different blends compositions. The results of the diffusion coefficients, obtained thanks to migration tests, showed that the CN can slow the plasticizer migration. However, the best result was achieved with micrometric calcium carbonate while nanometric calcium carbonate results were less effective due to favoring of some bio polyesters’ chain scission. The use of both micrometric calcium carbonate and CN was counterproductive due to the agglomeration phenomena that were observed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767 · cited 1×
“The improvement of PLA’s toughness can be reached in different ways (that can also be adopted contemporary): plasticization, copolymerization, and melt blending with flexible polymers [9,10].”
BackgroundBenchmarking the in Vitro Toxicity and Chemical Composition of Plastic Consumer Products
Zimmermann, L., Dierkes, G., Ternes, T. A., Völker, C., & Wagner, M. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.9b02293 · Cited by 438
Gigante, V., Canesi, I., Cinelli, P., Coltelli, M. B., & Lazzeri, A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.015 · Cited by 156
Self-citation
Cited by
Aliotta, L., Seggiani, M., Lazzeri, A., Gigante, V., & Cinelli, P. (2022) · Polymers · doi:10.3390/polym14040844 · Cited by 360
Self-citationTowards Higher Quality of Recycled Plastics: Limitations from the Material’s Perspective
Alassali, A., Picuno, C., Chong, Z. K., Guo, J., Maletz, R., & Kuchta, K. (2021) · Sustainability · doi:10.3390/su132313266 · Cited by 68
Kim, D. Y., Lee, J. B., Lee, D. Y., & Seo, K. H. (2020) · Polymers · doi:10.3390/polym12091904 · Cited by 48
Evaluating additive release from conventional and biodegradable mulch films
Scopetani, C., Bellabarba, A., Selvolini, G., Martellini, T., Viti, C., & Cincinelli, A. (2025) · Science of The Total Environment · doi:10.1016/j.scitotenv.2025.179294 · Cited by 15
Metadata
- Authors
- Aliotta, L., Vannozzi, A., Panariello, L., Gigante, V., Coltelli, M.-B., & Lazzeri, A.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2020-06-17
- Volume
- 12
- Issue
- 6
- Pages
- 1366
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3036037103
- Cited by
- 61
- References
- 6
- FWCI
- 2.10
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.