The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Kinetics, Isotherm and Thermodynamic Studies for Efficient Adsorption of Congo Red Dye from Aqueous Solution onto Novel Cyanoguanidine-Modified Chitosan Adsorbent
Open accessAbstract
Novel Cyanoguanidine-modified chitosan (CCs) adsorbent was successfully prepared via a four-step procedure; first by protection of the amino groups of chitosan, second by insertion of epoxide rings, third by opening the latter with cyanoguanidine, and fourth by restoring the amino groups through elimination of the protection. Its structure and morphology were checked using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The adsorption capacity of CCs for Congo Red (CR) dye was studied under various conditions. It decreased significantly with the increase in the solution pH value and dye concentration, while it increased with increasing temperature. The adsorption fitted to the pseudo-second order kinetic model and Elovich model. The intraparticle diffusion model showed that the adsorption involved a multi-step process. The isotherm of CR dye adsorption by CCs conforms to the Langmuir isotherm model, indicating the monolayer nature of adsorption. The maximum monolayer coverage capacity, qmax, was 666.67 mg g−1. Studying the thermodynamic showed that the adsorption was endothermic as illustrated from the positive value of enthalpy (34.49 kJ mol−1). According to the values of ΔG°, the adsorption process was spontaneous at all selected temperatures. The value of ΔS° showed an increase in randomness for the adsorption process. The value of activation energy was 2.47 kJ mol−1. The desorption percentage reached to 58% after 5 cycles. This proved that CCs is an efficient and a promising adsorbent for the removal of CR dye from its aqueous solution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Non-conventional low-cost adsorbents for dye removal: A review
CRINI, G. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.05.001 · Cited by 4,508
Vakili, M., Rafatullah, M., Salamatinia, B., Abdullah, A. Z., Ibrahim, M. H., Tan, K. B., Gholami, Z., & Amouzgar, P. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.007 · Cited by 1,099
Banerjee, S., & Chattopadhyaya, M. C. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.06.005 · Cited by 791
Kadirvelu, K., Kavipriya, M., Karthika, C., Radhika, M., Vennilamani, N., & Pattabhi, S. (2003) · Bioresource Technology · doi:10.1016/s0960-8524(02)00201-8 · Cited by 773
Chitosan-based hydrogels: Preparation, properties and applications
Shariatinia, Z., & Jalali, A. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.034 · Cited by 393
Lafi, R., Montasser, I., & Hafiane, A. (2019) · Adsorption Science & Technology · doi:10.1177/0263617418819227 · Cited by 357
Adsorption of an anionic dye (Congo red) from aqueous solutions by pine bark
Litefti, K., Freire, M. S., Stitou, M., & González-Álvarez, J. (2019) · Scientific Reports · doi:10.1038/s41598-019-53046-z · Cited by 311
Buthelezi, S., Olaniran, A., & Pillay, B. (2012) · Molecules · doi:10.3390/molecules171214260 · Cited by 207
Kinetic modeling of liquid-phase adsorption of Congo red dye using guava leaf-based activated carbon
Ojedokun, A. T., & Bello, O. S. (2017) · Applied Water Science · doi:10.1007/s13201-015-0375-y · Cited by 162
Preparation of Chitosan-Polyvinyl Alcohol Blends and Studies on Thermal and Mechanical Properties
Abraham, A., Soloman, P. A., & Rejini, V. O. (2016) · Procedia Technology · doi:10.1016/j.protcy.2016.05.206 · Cited by 161
Sabaa, M. W., Mohamed, N. A., Mohamed, R. R., Khalil, N. M., & Soliman, S. M. A. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.10.024 · Cited by 153
Self-citationJabar, J. M., Odusote, Y. A., Alabi, K. A., & Ahmed, I. B. (2020) · Applied Water Science · doi:10.1007/s13201-020-01221-3 · Cited by 144
Tahira, I., Aslam, Z., Abbas, A., Monim-ul-Mehboob, M., Ali, S., & Asghar, A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.06.173 · Cited by 143
Development of novel cross-linked chitosan for the removal of anionic Congo red dye
Zahir, A., Aslam, Z., Kamal, M. S., Ahmad, W., Abbas, A., & SHAWABKEH, R. A. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.09.006 · Cited by 141
Cai, L., Ying, D., Liang, X., Zhu, M., Lin, X., Xu, Q., Cai, Z., Xu, X., & Zhang, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128404 · Cited by 136
Adsorption of Methylene Blue from Aqueous Solution by Crosslinked Chitosan/Bentonite Composite
Bulut, Y., & Karaer, H. (2014) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2014.888004 · Cited by 120
Al‐Harby, N. F., Almutairi, R. S., & Mohamed, N. A. (2021) · Polymers · doi:10.3390/polym13213659 · Cited by 109
Self-citationAl‐Harby, N. F., Ibrahim, S. M., & Mohamed, N. A. (2017) · Water Science & Technology · doi:10.2166/wst.2017.442 · Cited by 79
Self-citationLiquid phase adsorption of Congo red dye on functionalized corn cobs
Ojedokun, A. T., & Bello, O. S. (2016) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2016.1234384 · Cited by 68
Xanthated chitosan/cellulose sponges for the efficient removal of anionic and cationic dyes
Xu, X., Yu, J., Liu, C., Yang, G. Y., Shi, L., & Zhuang, X. (2021) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2021.104840 · Cited by 68
Elmehbad, N. Y., & Mohamed, N. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.298 · Cited by 67
Self-citationSurikumaran, H., Mohamad, S., & Sarih, N. M. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15046111 · Cited by 52
Mohamed, N. A., & El‐Ghany, N. A. A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.101 · Cited by 52
Self-citationRemoval of Congo Red from Aqueous Solution Using Magnetic Chitosan Composite Microparticles
Wang, P., Yan, T., & Wang, L. (2013) · BioResources · doi:10.15376/biores.8.4.6026-6043 · Cited by 47
Novel antimicrobial superporous cross-linked chitosan/pyromellitimide benzoyl thiourea hydrogels
Mohamed, N. A., El‐Ghany, N. A. A., & Fahmy, M. M. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.09.023 · Cited by 46
Self-citationMohamed, N. A., Al‐Harby, N. F., & Almarshed, M. S. (2019) · Polymer Bulletin · doi:10.1007/s00289-019-03058-6 · Cited by 41
Self-citationMohamed, N. A., & El‐Ghany, N. A. A. (2018) · Cellulose · doi:10.1007/s10570-018-2096-5 · Cited by 40
Self-citationCyanoguanidine-crosslinked chitosan to adsorption of food dyes in the aqueous binary system
Gonçalves, J. O., Dotto, G. L., & Pinto, L. A. D. A. (2015) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2015.07.061 · Cited by 36
Xu, G., Zhu, Y., Wang, X., Wang, S., Cheng, T., Ping, R., Cao, J., & Lv, K. (2019) · e-Polymers · doi:10.1515/epoly-2019-0025 · Cited by 27
Removal of Congo red dye by gemini surfactant C12-4-C12 · 2Br-modified chitosan hydrogel beads
Lin, C., Li, S., Chen, M., & Jiang, R. (2016) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2016.1138229 · Cited by 26
Mohamed, N. A., Al‐Harby, N. F., & Almarshed, M. S. (2021) · Polymers and Polymer Composites · doi:10.1177/0967391121999364 · Cited by 22
Self-citationTerephthalohydrazido cross-linked chitosan hydrogels: synthesis, characterization and applications
Elmehbad, N. Y., & Mohamed, N. A. (2021) · International Journal of Polymeric Materials · doi:10.1080/00914037.2021.1933975 · Cited by 19
Self-citation
Cited by
Milakin, K. A., Taboubi, O., Lhotka, M., Hromádková, J., Hodan, J., Pop-Georgievski, O., & Bober, P. (2025) · Emergent Materials · doi:10.1007/s42247-025-01130-8 · Cited by 4
Metadata
- Authors
- Al-Harby, N. F., Albahly, E. F., & Mohamed, N. A.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-12-18
- Volume
- 13
- Issue
- 24
- Pages
- 4446
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4200589021
- Cited by
- 280
- References
- 32
- FWCI
- 7.74
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.