The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Application of Fungal Biomass for the Development of New Polylactic Acid-Based Biocomposites
Abstract
Fungal biomass (FB), a by-product of the fermentation processes produced in large volumes, is a promising biomaterial that can be incorporated into poly(lactic acid) (PLA) to develop enhanced biocomposites that fully comply with the biobased circular economy concept. The PLA/FB composites, with the addition of triethyl citrate (TEC) as a biobased plasticizer, were fabricated by a microcompounder at 150 °C followed by injection molding. The effects of FB (10 and 20 wt %) and TEC (5, 10, and 15 wt %) contents on the mechanical, thermal and surface properties of the biocomposites were analyzed by several techniques. The PLA/FB/TEC composites showed a rough surface in their fracture section. A progressive decrease in tensile strength and Young’s modulus was observed with increasing FB and TEC, while elongation at break and impact strength started to increase. The neat PLA and biocomposite containing 10% FB and 15% TEC exhibited the lowest (3.84%) and highest (224%) elongation at break, respectively. For all blends containing FB, the glass transition, crystallization and melting temperatures were shifted toward lower values compared to the neat PLA. The incorporation of FB to PLA thus offers the possibility to overcome one of the main drawbacks of PLA, which is brittleness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Research works printed but not linked: 71
- Cottet, C., Ramirez-Tapias, Y.A., Delgado, J.F., de la Osa, O., Salvay, A.G., and Peltzer, M.A. (2020). Biobased Materials from Microbial Biomass and Its Derivatives. Materials, 13. · DOI
- Andrew, 2022, Sustainable biobased composites for advanced applications: Recent trends and future opportunities—A critical review, Compos. Part C Open Access, 7, 100220, 10.1016/j.jcomc.2021.100220 · DOI · Paper page
- Díez-Pascual, A.M. (2019). Synthesis and Applications of Biopolymer Composites. Int. J. Mol. Sci., 20. · DOI
- Mousa, N., Galiwango, E., Haris, S., Al-Marzouqi, A.H., Abu-Jdayil, B., and Caires, Y.L. (2022). A New Green Composite Based on Plasticized Polylactic Acid Mixed with Date Palm Waste for Single-Use Plastics Applications. Polymers, 14. · DOI
- Chan, 2020, Mechanical Stability of Polyhydroxyalkanoate (PHA)-Based Wood Plastic Composites (WPCs), J. Polym. Environ., 28, 1571, 10.1007/s10924-020-01697-9 · DOI
- Fang, 2022, Spent coffee Grounds/Poly(butylene succinate) biocomposites with Robust mechanical property and heat resistance via reactive compatibilization, Compos. Commun., 29, 101003, 10.1016/j.coco.2021.101003 · DOI
- Motloung, M.P., Mofokeng, T.G., and Ray, S.S. (2022). Viscoelastic, Thermal, and Mechanical Properties of Melt-Processed Poly (ε-Caprolactone) (PCL)/Hydroxyapatite (HAP) Composites. Materials, 15. · DOI
- Peidayesh, H., Mosnáčková, K., Špitalský, Z., Heydari, A., Šišková, A.O., and Chodák, I. (2021). Thermoplastic Starch-Based Composite Reinforced by Conductive Filler Networks: Physical Properties and Electrical Conductivity Changes during Cyclic Deformation. Polymers, 13. · doi:10.3390/polym13213819
- Hu, H., Xu, A., Zhang, D., Zhou, W., Peng, S., and Zhao, X. (2020). High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization. Molecules, 25. · DOI
- Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N.D., Vlachopoulos, A., Koumentakou, I., and Bikiaris, D.N. (2021). Poly(lactic acid): A Versatile Biobased Polymer for the Future with Multifunctional Properties—From Monomer Synthesis, Polymerization Techniques and Molecular Weight Increase to PLA Applications. Polymers, 13. · DOI · Paper page
- Righetti, M.C., Cinelli, P., Mallegni, N., Massa, C.A., Bronco, S., Stäbler, A., and Lazzeri, A. (2019). Thermal, Mechanical, and Rheological Properties of Biocomposites Made of Poly(lactic acid) and Potato Pulp Powder. Int. J. Mol. Sci., 20. · DOI
- Scaffaro, 2018, Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves, Compos. Part A Appl. Sci. Manuf., 112, 315, 10.1016/j.compositesa.2018.06.024 · DOI
- Herrera, N., Singh, A.A., Salaberria, A.M., Labidi, J., Mathew, A.P., and Oksman, K. (2017). Triethyl Citrate (TEC) as a Dispersing Aid in Polylactic Acid/Chitin Nanocomposites Prepared via Liquid-Assisted Extrusion. Polymers, 9. · DOI
- Singh, 2020, Green Processing Route for Polylactic Acid–Cellulose Fiber Biocomposites, ACS Sustain. Chem. Eng., 8, 4128, 10.1021/acssuschemeng.9b06760 · DOI
- Ambone, 2017, Polylactic Acid (PLA) Biocomposites Filled with Waste Leather Buff (WLB), J. Polym. Environ., 25, 1099, 10.1007/s10924-016-0891-3 · DOI
- Choi, 2006, Development of biodegradable hot-melt adhesive based on poly-ε-caprolactone and soy protein isolate for food packaging system, LWT Food Sci. Technol., 39, 591, 10.1016/j.lwt.2005.04.012 · DOI
- Zhu, 2012, Compatibilizing Effects of Maleated Poly(lactic acid) (PLA) on Properties of PLA/Soy Protein Composites, Ind. Eng. Chem. Res., 51, 7786, 10.1021/ie300118x · DOI
- Zaaba, 2019, A review on tensile and morphological properties of poly (lactic acid) (PLA)/thermoplastic starch (TPS) blends, Polym.-Plast. Technol. Mater., 58, 1945
- Koh, 2018, Fully biodegradable Poly(lactic acid)/Starch blends: A review of toughening strategies, Int. J. Biol. Macromol., 109, 99, 10.1016/j.ijbiomac.2017.12.048 · DOI · Paper page
- Useche, 2022, Thermoplastic Starch (TPS)/Polylactic Acid (PLA) Blending Methodologies: A Review, J. Polym. Environ., 30, 75, 10.1007/s10924-021-02207-1 · DOI · Paper page
- Tian, 2018, Fabrication, properties and applications of soy-protein-based materials: A review, Int. J. Biol. Macromol., 120, 475, 10.1016/j.ijbiomac.2018.08.110 · DOI · Paper page
- Gautam, 2021, Green Natural Protein Isolate based composites and nanocomposites: A review, Polym. Test., 99, 106626, 10.1016/j.polymertesting.2020.106626 · DOI
- Boontima, 2015, Mechanical Properties of Sugarcane Bagasse Fiber-Reinforced Soy Based Biocomposites, J. Polym. Environ., 23, 97, 10.1007/s10924-014-0679-2 · DOI
- Bartos, 2021, Biobased PLA/sugarcane bagasse fiber composites: Effect of fiber characteristics and interfacial adhesion on properties, Compos. Part A Appl. Sci. Manuf., 143, 106273, 10.1016/j.compositesa.2021.106273 · DOI
- Orue, 2020, The use of alkali treated walnut shells as filler in plasticized poly(lactic acid) matrix composites, Ind. Crops Prod., 145, 111993, 10.1016/j.indcrop.2019.111993 · DOI
- Guo, 2021, Preparation and characterization of bio-based green renewable composites from poly(lactic acid) reinforced with corn stover, J. Polym. Res., 28, 199, 10.1007/s10965-021-02559-1 · DOI
- Scaffaro, R., Maio, A., Gulino, E.F., Alaimo, G., and Morreale, M. (2021). Green Composites Based on PLA and Agricultural or Marine Waste Prepared by FDM. Polymers, 13. · doi:10.3390/polym13091361
- Ozyhar, 2020, Effect of functional mineral additive on processability and material properties of wood-fiber reinforced poly(lactic acid) (PLA) composites, Compos. Part A Appl. Sci. Manuf., 132, 105827, 10.1016/j.compositesa.2020.105827 · DOI
- Madyan, 2020, Classification of wood fibre geometry and its behaviour in wood poly(lactic acid) composites, Compos. Part A Appl. Sci. Manuf., 133, 105871, 10.1016/j.compositesa.2020.105871 · DOI
- Dobrzyńska-Mizera, M., Knitter, M., Woźniak-Braszak, A., Baranowski, M., Sterzyński, T., and Di Lorenzo, M.L. (2020). Poly(l-Lactic Acid)/Pine Wood Bio-Based Composites. Materials, 13. · DOI
- Tao, 2021, Waste office paper filled polylactic acid composite filaments for 3D printing, Compos. Part B Eng., 221, 108998, 10.1016/j.compositesb.2021.108998 · DOI
- Huda, 2006, Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative study, Compos. Sci. Technol., 66, 1813, 10.1016/j.compscitech.2005.10.015 · DOI · Paper page
- Huda, 2005, A Study on Biocomposites from Recycled Newspaper Fiber and Poly(lactic acid), Ind. Eng. Chem. Res., 44, 5593, 10.1021/ie0488849 · DOI · Paper page
- Xu, 2019, Study on Mechanical and Thermal Properties of Poly(Lactic acid)/Poly(Butylene adipate-co-terephthalate)/Office Wastepaper Fiber Biodegradable Composites, J. Polym. Environ., 27, 1273, 10.1007/s10924-019-01428-9 · DOI
- Gama, 2022, New poly(lactic acid) composites produced from coffee beverage wastes, J. Appl. Polym. Sci., 139, 51434, 10.1002/app.51434 · DOI
- Akderya, 2020, Investigation of long-term ageing effect on the thermal properties of chicken feather fibre/poly(lactic acid) biocomposites, J. Polym. Res., 27, 162, 10.1007/s10965-020-02132-2 · DOI
- Molins, 2018, Environmental Impact Assessment of Polylactide(PLA)/Chicken Feathers Biocomposite Materials, J. Polym. Environ., 26, 873, 10.1007/s10924-017-0982-9 · DOI
- Baba, 2017, Preparation and mechanical characterization of chicken feather/PLA composites, Polym. Compos., 38, 837, 10.1002/pc.23644 · DOI
- Aymerich, 2015, Properties and optimal manufacturing conditions of chicken feathers/poly(lactic acid) biocomposites, J. Compos. Mater., 50, 1671
- Baba, 2017, Thermal characterization of chicken feather/PLA biocomposites, J. Therm. Anal. Calorim., 129, 347, 10.1007/s10973-017-6188-5 · DOI
- Islam, 2017, Morphology and mechanics of fungal mycelium, Sci. Rep., 7, 13070, 10.1038/s41598-017-13295-2 · DOI · Paper page
- 2020, Potential of residual fungal biomass: A review, Environ. Sci. Pollut. Res., 27, 13019, 10.1007/s11356-020-08193-6 · DOI · Paper page
- Filipova, I., Irbe, I., Spade, M., Skute, M., Dāboliņa, I., Baltiņa, I., and Vecbiskena, L. (2021). Mechanical and Air Permeability Performance of Novel Biobased Materials from Fungal Hyphae and Cellulose Fibers. Materials, 14. · DOI
- Gallardo, 2020, Utilization of industrial by-product fungal biomass from Aspergillus niger and Fusarium culmorum to obtain biosorbents for removal of pesticide and metal ions from aqueous solutions, J. Environ. Chem. Eng., 8, 104355, 10.1016/j.jece.2020.104355 · doi:10.1016/j.jece.2020.104355
- 2016, Evaluation of single cell protein from yeast for the development of wood adhesives, Eur. J. Wood Wood Prod., 74, 821, 10.1007/s00107-016-1063-9 · doi:10.1007/s00107-016-1063-9
- Bustillos, 2020, Uncovering the Mechanical, Thermal, and Chemical Characteristics of Biodegradable Mushroom Leather with Intrinsic Antifungal and Antibacterial Properties, ACS Appl. Bio Mater., 3, 3145, 10.1021/acsabm.0c00164 · DOI
- Wijayarathna, 2022, Fungal textile alternatives from bread waste with leather-like properties, Resour. Conserv. Recycl., 179, 106041, 10.1016/j.resconrec.2021.106041 · doi:10.1016/j.resconrec.2021.106041
- Bruscato, 2019, High performance of macrofungi in the production of mycelium-based biofoams using sawdust—Sustainable technology for waste reduction, J. Clean. Prod., 234, 225, 10.1016/j.jclepro.2019.06.150 · DOI
- Svensson, 2021, Fungal textiles: Wet spinning of fungal microfibers to produce monofilament yarns, Sustain. Mater. Technol., 28, e00256
- Irbe, I., Filipova, I., Skute, M., Zajakina, A., Spunde, K., and Juhna, T. (2021). Characterization of Novel Biopolymer Blend Mycocel from Plant Cellulose and Fungal Fibers. Polymers, 13. · doi:10.3390/polym13071086
- Appels, 2020, Fungal mycelium classified in different material families based on glycerol treatment, Commun. Biol., 3, 334, 10.1038/s42003-020-1064-4 · DOI
- Nawawi, 2020, Surface properties of chitin-glucan nanopapers from Agaricus bisporus, Int. J. Biol. Macromol., 148, 677, 10.1016/j.ijbiomac.2020.01.141 · doi:10.1016/j.ijbiomac.2020.01.141
- Yousefi, 2021, Fungal chitin-glucan nanopapers with heavy metal adsorption properties for ultrafiltration of organic solvents and water, Carbohydr. Polym., 253, 117273, 10.1016/j.carbpol.2020.117273 · DOI
- Nawawi, 2020, Plastic to elastic: Fungi-derived composite nanopapers with tunable tensile properties, Compos. Sci. Technol., 198, 108327, 10.1016/j.compscitech.2020.108327 · DOI
- Janesch, 2020, Mushroom-derived chitosan-glucan nanopaper filters for the treatment of water, React. Funct. Polym., 146, 104428, 10.1016/j.reactfunctpolym.2019.104428 · DOI
- Jones, 2019, Waste-Derived Low-Cost Mycelium Nanopapers with Tunable Mechanical and Surface Properties, Biomacromolecules, 20, 3513, 10.1021/acs.biomac.9b00791 · DOI
- Lee, 2019, Chitin Nanopaper from Mushroom Extract: Natural Composite of Nanofibers and Glucan from a Single Biobased Source, ACS Sustain. Chem. Eng., 7, 6492, 10.1021/acssuschemeng.9b00721 · doi:10.1021/acssuschemeng.9b00721
- Haneef, 2017, Advanced Materials from Fungal Mycelium: Fabrication and Tuning of Physical Properties, Sci. Rep., 7, 41292, 10.1038/srep41292 · DOI · Paper page
- Attias, 2021, Biofabrication of Nanocellulose–Mycelium Hybrid Materials, Adv. Sustain. Syst., 5, 2000196, 10.1002/adsu.202000196 · DOI
- Sun, 2019, Fully Bio-Based Hybrid Composites Made of Wood, Fungal Mycelium and Cellulose Nanofibrils, Sci. Rep., 9, 3766, 10.1038/s41598-019-40442-8 · DOI
- Gurram, 2018, A Solvent-Free Approach for Production of Films from Pectin and Fungal Biomass, J. Polym. Environ., 26, 4282, 10.1007/s10924-018-1300-x · DOI · Paper page
- Ageyeva, 2021, Improving the ductility and heat deflection temperature of injection molded Poly(lactic acid) products: A comprehensive review, Polym. Test., 101, 107282, 10.1016/j.polymertesting.2021.107282 · DOI
- Paul, 2021, Effect of Green Plasticizer on the Performance of Microcrystalline Cellulose/Polylactic Acid Biocomposites, ACS Appl. Polym. Mater., 3, 3071, 10.1021/acsapm.1c00281 · doi:10.1021/acsapm.1c00281
- Gzyra-Jagieła, K., Sulak, K., Draczyński, Z., Podzimek, S., Gałecki, S., Jagodzińska, S., and Borkowski, D. (2021). Modification of Poly(lactic acid) by the Plasticization for Application in the Packaging Industry. Polymers, 13. · DOI
- Gigante, V., Cinelli, P., Sandroni, M., D’ambrosio, R., Lazzeri, A., and Seggiani, M. (2021). On the Use of Paper Sludge as Filler in Biocomposites for Injection Moulding. Materials, 14. · DOI
- Mysiukiewicz, 2019, Utilization of linseed cake as a postagricultural functional filler for poly(lactic acid) green composites, J. Appl. Polym. Sci., 136, 47152, 10.1002/app.47152 · DOI
- Surya, I., Olaiya, N.G., Rizal, S., Zein, I., Sri Aprilia, N.A., Hasan, M., Yahya, E.B., Sadasivuni, K.K., and Abdul Khalil, H.P.S. (2020). Plasticizer Enhancement on the Miscibility and Thermomechanical Properties of Polylactic Acid-Chitin-Starch Composites. Polymers, 12. · DOI
- Vasile, C., Stoleru, E., Darie-Niţa, R.N., Dumitriu, R.P., Pamfil, D., and Tarţau, L. (2019). Biocompatible Materials Based on Plasticized Poly(lactic acid), Chitosan and Rosemary Ethanolic Extract I. Effect of Chitosan on the Properties of Plasticized Poly(lactic acid) Materials. Polymers, 11. · DOI
- Jones, 2018, Thermal Degradation and Fire Properties of Fungal Mycelium and Mycelium—Biomass Composite Materials, Sci. Rep., 8, 17583, 10.1038/s41598-018-36032-9 · DOI · Paper page
- Li, D., Jiang, Y., Lv, S., Liu, X., Gu, J., Chen, Q., and Zhang, Y. (2018). Preparation of plasticized poly (lactic acid) and its influence on the properties of composite materials. PLoS ONE, 13. · DOI
- Halko, 2018, Study of the binding sites in the biomass of Aspergillus niger wild-type strains by FTIR spectroscopy, Chem. Pap., 72, 2283, 10.1007/s11696-018-0487-6 · doi:10.1007/s11696-018-0487-6
Metadata
- Authors
- Asadollahzadeh, M., Mahboubi, A., Taherzadeh, M. J., Åkesson, D., & Lennartsson, P. R.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-04-24
- Volume
- 14
- Issue
- 9
- Pages
- 1738
- ISSN
- 2073-4360
- Cited by
- 26
- References
- 1
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Application of Fungal Biomass for the Development of New Polylactic Acid-Based Biocomposites. https://app.cochat.ai/papers/10.3390/polym14091738
- The paper
- Asadollahzadeh, M., Mahboubi, A., Taherzadeh, M. J., Åkesson, D., & Lennartsson, P. R. (2022). Application of Fungal Biomass for the Development of New Polylactic Acid-Based Biocomposites. Polymers. https://doi.org/10.3390/polym14091738
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.