CoChat

Design of a New Phthalocyanine-Based Ion-Imprinted Polymer for Selective Lithium Recovery from Desalination Plant Reverse Osmosis Waste

Open access

The DOI matches its Crossref record; 64 of the 65 references it cites were found in a registry or an index.

Abstract

In this study, a novel technique is introduced that involves the combination of an ion-imprinted polymer and solid-phase extraction to selectively adsorb lithium ions from reverse osmosis brine. In the process of synthesizing ion-imprinted polymers, phthalocyanine acrylate acted as the functional monomer responsible for lithium chelation. The structural and morphological characteristics of the molecularly imprinted polymers and non-imprinted polymers were assessed using Fourier transform infrared spectroscopy and scanning electron microscopy. The adsorption data for Li on an ion-imprinted polymer showed an excellent fit to the Langmuir isotherm, with a maximum adsorption capacity (Qm) of 3.2 mg·g−1. Comprehensive chemical analyses revealed a significant Li concentration with a higher value of 45.36 mg/L. Through the implementation of a central composite design approach, the adsorption and desorption procedures were systematically optimized by varying the pH, temperature, sorbent mass, and elution volume. This systematic approach allowed the identification of the most efficient operating conditions for extracting lithium from seawater reverse osmosis brine using ion-imprinted polymer–solid-phase extraction. The optimum operating conditions for the highest efficiency of adsorbing Li+ were determined to be a pH of 8.49 and a temperature of 45.5 °C. The efficiency of ion-imprinted polymer regeneration was evaluated through a cycle of the adsorption–desorption process, which resulted in Li recoveries of up to 80%. The recovery of Li from the spiked brine sample obtained from the desalination plant reverse osmosis waste through the ion-imprinted polymer ranged from 62.8% to 71.53%.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/polym15183847

Cites

64 of 64 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Synthesis of 4-(4-hydroxyphenoxy) benzene-1,2-dicarbonitrile.
Figure 1 Synthesis of 4-(4-hydroxyphenoxy) benzene-1,2-dicarbonitrile.CC BY · PubMed Central
Figure 2 Synthesis of 2,9,16,23-tetra-(4′-hydroxyphenoxy) phthalocyanine.
Figure 2 Synthesis of 2,9,16,23-tetra-(4′-hydroxyphenoxy) phthalocyanine.CC BY · PubMed Central
Figure 3 Synthesis of 2,9,16,23-tetra-(4-methacrloyloxyphenoxy) phthalocyanine.
Figure 3 Synthesis of 2,9,16,23-tetra-(4-methacrloyloxyphenoxy) phthalocyanine.CC BY · PubMed Central
Figure 4 Schematic illustration of Li-IIP synthesis steps and Li removal from IIP binding sites.
Figure 4 Schematic illustration of Li-IIP synthesis steps and Li removal from IIP binding sites.CC BY · PubMed Central
Figure 5 IIP or NIP wash process.
Figure 5 IIP or NIP wash process.CC BY · PubMed Central
Figure 6 SEM Images of unleached IIP (a) and leached IIP at different magnifications (b–d).
Figure 6 SEM Images of unleached IIP (a) and leached IIP at different magnifications (b–d).CC BY · PubMed Central
Figure 7 BET (a), BJH (b), and adsorption/desorption isotherms (c) plot of lithium-imprinted polymer.
Figure 7 BET (a), BJH (b), and adsorption/desorption isotherms (c) plot of lithium-imprinted polymer.CC BY · PubMed Central
Figure 8 FT-IR spectra of the unleached (Li-IIP) and the leached IIP (IIP) ion-imprinted polymer.
Figure 8 FT-IR spectra of the unleached (Li-IIP) and the leached IIP (IIP) ion-imprinted polymer.CC BY · PubMed Central
Figure 9 Adsorption capacity studies for the IIP and NIP.
Figure 9 Adsorption capacity studies for the IIP and NIP.CC BY · PubMed Central
Figure 10 RSM showing the interaction between the independent factors (A,D) pH and temperature, (B) pH and sorbent mass, (C) temperature and sorbent mass, (D) pH and elution volume, (E) elution volume and temperature, and (F) elution flow rate and sorbent mass.
Figure 10 RSM showing the interaction between the independent factors (A,D) pH and temperature, (B) pH and sorbent mass, (C) temperature and sorbent mass, (D) pH and elution volume, (E) elution volume and temperature, and (F) elution flow rate and sorbent mass.CC BY · PubMed Central
Figure 11 Contours of estimated response surface and showing the region that maximizes adsorption and desorption for a fixed temperature and elution volume.
Figure 11 Contours of estimated response surface and showing the region that maximizes adsorption and desorption for a fixed temperature and elution volume.CC BY · PubMed Central
Figure 12 Desirability profiles and predicted values for factors affecting the adsorption and extraction of Li(I).
Figure 12 Desirability profiles and predicted values for factors affecting the adsorption and extraction of Li(I).CC BY · PubMed Central
Figure 13 Adsorption stability and regeneration performances of IIP after multiple adsorption–desorption cycles.
Figure 13 Adsorption stability and regeneration performances of IIP after multiple adsorption–desorption cycles.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 16

  1. Taniguchi, 2016, Seawater Desalination for Potable Water Supply: A Review, J. Water Env. Technol., 14, 69
  2. Kim, 2015, A Review of Lithium-ion Battery Recycling Processes, J. Ind. Eng. Chem., 23, 1
  3. Hwang, 2015, A Review of the Extraction and Utilization of Lithium from Primary and Secondary Sources, J. Ind. Eng. Chem., 29, 1
  4. Hosseini, 2020, Lithium Recovery from Seawater by Electrospun Nanofibrous Adsorbent: A Review, Chem. Eng. J., 382, 123026
  5. Lee, 2005, Lithium Recovery from Seawater by Electrolysis, J. Power Sources, 146, 47
  6. (2023, September 18). Saudi Arabian desal plant recognized with Guinness World Record. Waterworld, 9 April 2021. Available online: https://www.waterworld.com/drinking-water/treatment/press-release/14201071/saudi-arabian-desal-plant-recognized-with-guinness-world-record.
  7. Burgos, 2020, Lithium Extraction from Seawater: A Review and Technical Assessment of Selected Adsorbents, Sep. Purif. Technol., 245, 116863
  8. Cui, 2017, Ion-imprinting Technology: Advances and Applications in Separation Science, TrAC Trends Analyt. Chem., 87, 63
  9. Ema, 2020, Recent Advances in Crown Ether-based Molecularly Imprinted Polymers, Polymers, 12, 2690
  10. Kumari, 2016, Molecularly Imprinted Polymers: A Cost-effective Alternative to Expensive Receptors for Biomimetic Sensing, Biosens. Bioelectron., 75, 328
  11. Zhang, 2018, Macrocyclic Crown Ethers: Synthesis, Functionalization, and Applications, Chem. Rev., 118, 10569
  12. Li, 2020, Development of Crown Ethers-Based Materials for Selective Separation and Extraction of Lithium, J. Ind. Eng. Chem., 82, 10
  13. Zhou, 2019, Recent Advances in Crown Ethers for Lithium Extraction from Salt Lakes, Sep. Purif. Technol., 226, 366
  14. Han, 2020, Determination of Lithium in High Salinity Samples by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), Spectrosc. Spect. Anal., 40, 1214
  15. Yang, 2019, Preparation and Evaluation of Li+ Ion-Imprinted Polymer by Emulsion Polymerization for Selective Separation and Recovery of Li+, Sep. Purif. Technol., 215, 449
  16. Yang, 2018, Synthesis and Characterization of Li+ Ion-Imprinted Polymers by Suspension Polymerization for Selective Separation and Recovery of Li+, Ind. Eng. Chem. Res., 57, 6356

Cited by

See all 14

Metadata

Authors
Jamoussi, B., Chakroun, R., Al-Mur, B. A., Halawani, R. F., Aloufi, F. A., Chaabani, A., & Aljohani, N. S.
Affiliations
  • King Abdulaziz University (SA)
  • Department of Environment, Faculty of Environmental Sciences, King Abdulaziz University, Jeddah 21589, Saudi Arabia
Corresponding author
Jamoussi, Bassem
Venue
Polymers
Publisher
MDPI AG
Published
2023-09-21
Volume
15
Issue
18
Pages
3847
ISSN
2073-4360 (ISSN-L)
OpenAlex
W4386914354
Cited by
14
References
65
Citations by year
2026: 9 · 2025: 4 · 2024: 1
FWCI
1.38
Type
journal article
Language
en
Open access
Locations
  • Polymers (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
King Abdulaziz University (G:344-155-1443)
Topics
  • Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
  • Physical Sciences › Chemistry › Analytical Chemistry › Analytical chemistry methods development
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
Keywords
ion-imprinted polymer, lithium recovery, reverse osmosis brine, desalination wastewater, solid-phase extraction, selective adsorption, Langmuir isotherm, central composite design, pH and temperature optimization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.