CoChat
Sign Up
Cited by 22Innovative concrete reinforcement materialsNatural Fiber Reinforced CompositesStructural Behavior of Reinforced Concrete

The DOI matches its Crossref record; the references it cites are not checked yet.

Mechanical Behavior and Durability Performance of Concrete Reinforced with Hybrid Date Palm and Polypropylene Polymer Fibers

Open access
Adamu, Musa, Labib, Wafa Abdelmajeed, Ibrahim, Yasser E., Alanazi, Hani·2025·Polymers
DOI 10.3390/polym17101350PMC PMC12115324
Open this paper in CoChat — free accountOpen PDF

Abstract

Concrete faces challenges related to brittleness and crack propagation, which compromise its tensile strength and durability. Fiber reinforcement has emerged as a promising solution, yet research on hybrid systems combining natural fibers, such as date palm fiber (DPF), with synthetic polymer fibers, like polypropylene fiber (PPF), remains limited. This study investigates the mechanical and durability performance of concrete reinforced with hybrid DPF and PPF, aiming to address the gap in understanding the synergistic effects of combining natural and synthetic fibers in cementitious materials, and improving the tensile strength and crack resistance of the concrete. Both the DPF and PPF were added at varying dosages (0%, 0.25%, 0.5%, 0.75%, and 1% by weight of cement). Both DPF and PPF reduced the workability, fresh density and compressive strength of concrete, with DPF exhibiting a more significant reduction due to its higher hydrophilicity and poor compatibility with the cement matrix. A maximum reduction of 44.78% was observed in the mix containing 1% DPF and 0.5% PPF. The fibers improved tensile strength and ductility, with mixes containing up to 1% combinations of DPF and PPF showing up to a 14.6% increase in splitting tensile strength and 9.5% improvement in flexural strength compared to the control mix. However, durability was compromised—water absorption increased by up to 58% in hybrid mixes containing 1.5% total fiber content, while pore volume rose by as much as 17.5% compared to plain concrete. These increases were more pronounced with higher DPF content due to its hydrophilic nature and poor cement compatibility. This study highlights the potential of hybrid fibers to improve concrete performance while promoting eco-friendly and cost-effective solutions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/polym17101350

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

The citation lists haven’t been fetched yet

References 57 · Cited by 22

Research works printed but not linked: 59

  1. Shariq, 2020, Successive sustained loading effect on the long-term deflection of flat slab, SN Appl. Sci., 2, 1896, 10.1007/s42452-020-03703-0 · DOI
  2. Shah, S.P., Swartz, S.E., and Ouyang, C. (1995). Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock and Other Quasi-Brittle Materials, John Wiley & Sons.
  3. Hosseinzadeh, 2023, The effects of steel, polypropylene, and high-performance macro polypropylene fibers on mechanical properties and durability of high-strength concrete, Constr. Build. Mater., 386, 131589, 10.1016/j.conbuildmat.2023.131589 · DOI
  4. Hou, L., Wen, B., Huang, W., Zhang, X., and Zhang, X. (2023). Mechanical Properties and Microstructure of Polypropylene–Glass-Fiber-Reinforced Desert Sand Concrete. Polymers, 15. · DOI
  5. Li, F., Jin, S., Cheng, P., Wang, Z., and Yang, Z. (2024). Study on Mechanical Properties and Carbon Emission Analysis of Polypropylene Fiber-Reinforced Brick Aggregate Concrete. Polymers, 16. · DOI
  6. Del Savio, A.A., La Torre Esquivel, D., and García Landeo, J.M. (2023). Post-Cracking Properties of Concrete Reinforced with Polypropylene Fibers through the Barcelona Test. Polymers, 15. · DOI
  7. Yaqin, C., Haq, S.U., Iqbal, S., Khan, I., Room, S., and Khan, S.A. (2024). Performance evaluation of indented macro synthetic polypropylene fibers in high strength self-compacting concrete (SCC). Sci. Rep., 14. · DOI
  8. Balea, A., Fuente, E., Monte, M.C., Blanco, Á., and Negro, C. (2021). Fiber reinforced cement based composites. Fiber Reinforced Composites, Elsevier. · DOI
  9. Bentur, A., and Mindess, S. (2006). Fibre Reinforced Cementitious Composites, CRC Press. · DOI
  10. Al-Oqla, F.M., Alothman, O.Y., Jawaid, M., Sapuan, S., and Es-Saheb, M. (2014). Processing and properties of date palm fibers and its composites. Biomass and Bioenergy: Processing and Properties, Springer. · DOI
  11. Ibrahim, Y.E., Adamu, M., Marouf, M.L., Ahmed, O.S., Drmosh, Q., and Malik, M.A. (2022). Mechanical performance of date-palm-fiber-reinforced concrete containing silica fume. Buildings, 12. · DOI
  12. Adamu, M., Alanazi, F., Ibrahim, Y.E., Alanazi, H., and Khed, V.C. (2022). A comprehensive review on sustainable natural fiber in cementitious composites: The date palm fiber case. Sustainability, 14. · DOI
  13. Benaniba, 2020, Thermo-mechanical characterization of a bio-composite mortar reinforced with date palm fiber, J. Eng. Fibers Fabr., 15, 1558925020948234
  14. Menyhárd, A., Menczel, J.D., and Abraham, T. (2020). Polypropylene fibers. Thermal Analysis of Textiles and Fibers, Elsevier. · DOI
  15. Hsie, 2008, Mechanical properties of polypropylene hybrid fiber-reinforced concrete, Mater. Sci. Eng. A, 494, 153, 10.1016/j.msea.2008.05.037 · DOI
  16. Ayat, 2021, Treatment of date palm fibres mesh: Influence on the rheological and mechanical properties of fibre-cement composites, Constr. Build. Mater., 273, 121056, 10.1016/j.conbuildmat.2020.121056 · DOI
  17. Qin, 2019, Experimental study of compressive behavior of polypropylene-fiber-reinforced and polypropylene-fiber-fabric-reinforced concrete, Constr. Build. Mater., 194, 216, 10.1016/j.conbuildmat.2018.11.042 · DOI
  18. Bentegri, 2020, Rheological and tribological behaviors of polypropylene fiber reinforced concrete, Constr. Build. Mater., 261, 119962, 10.1016/j.conbuildmat.2020.119962 · DOI
  19. Yong, 2024, Utilizing bio-based and industrial waste aggregates to improve mechanical properties and thermal insulation in lightweight foamed macro polypropylene fibre-reinforced concrete, J. Build. Eng., 91, 109588, 10.1016/j.jobe.2024.109588 · DOI
  20. Leong, 2020, Mechanical properties and drying shrinkage of lightweight cementitious composite incorporating perlite microspheres and polypropylene fibers, Constr. Build. Mater., 246, 118410, 10.1016/j.conbuildmat.2020.118410 · DOI
  21. Yuan, 2021, Mechanical properties and microstructure of glass fiber and polypropylene fiber reinforced concrete: An experimental study, Constr. Build. Mater., 266, 121048, 10.1016/j.conbuildmat.2020.121048 · DOI
  22. Razmi, 2017, On the mixed mode I/II fracture properties of jute fiber-reinforced concrete, Constr. Build. Mater., 148, 512, 10.1016/j.conbuildmat.2017.05.034 · DOI
  23. Hasan, 2023, Eco-friendly self-consolidating concrete production with reinforcing jute fiber, J. Build. Eng., 63, 105519, 10.1016/j.jobe.2022.105519 · DOI
  24. Veerappan, 2024, Experimental studies of coir and jute-fiber reinforced concrete with M-sand, MatériaJa, 29, e20240115
  25. Nawab, 2023, A study on improving the performance of cement-based mortar with silica fume, metakaolin, and coconut fibers, Case Stud. Constr. Mater., 19, e02480
  26. Vélez, E., Rodríguez, R., Yanchapanta Gómez, N.B., Mora, E.D., Hernández, L., Albuja-Sánchez, J., and Calvo, M.I. (2022). Coconut-fiber composite concrete: Assessment of mechanical performance and environmental benefits. Fibers, 10. · DOI
  27. Kiamahalleh, 2024, Mechanical, durability and microstructural properties of waste-based concrete reinforced with sugarcane fiber, Structures, 67, 107019, 10.1016/j.istruc.2024.107019 · DOI
  28. Abdulkareem, 2024, Compressive and flexural strengths of bio-recycled concrete incorporated with kenaf fibre, J. Nat. Fibers, 21, 2296913, 10.1080/15440478.2023.2296913 · DOI
  29. Mutuku, 2024, Influence of fiber treatment methods on the mechanical properties of high strength concrete reinforced with sisal fibers, Heliyon, 10, e29760, 10.1016/j.heliyon.2024.e29760 · DOI
  30. Wang, R., Qiao, Z., Deng, X., Shen, X., Yang, Y., Wang, P., and Zhang, J. (2025). Experimental Investigation on Freeze–Thaw Durability of Polyacrylonitrile Fiber-Reinforced Recycled Concrete. Materials, 18. · DOI
  31. Zhao, X., Cai, L., Ji, X., Zeng, W., and Liu, J. (2022). Mechanical properties of polyethylene fiber reinforced ultra high performance concrete (UHPC). Materials, 15. · DOI
  32. Flores Nicolás, A., Menchaca Campos, E.C., Flores Nicolás, M., Martínez González, J.J., González Noriega, O.A., and Uruchurtu Chavarín, J. (2024). Influence of Recycled High-Density Polyethylene Fibers on the Mechanical and Electrochemical Properties of Reinforced Concrete. Fibers, 12. · DOI
  33. Sridhar, M., Kumar, M.V., Nagaprasad, N., Bhagat, S.K., and Ramaswamy, K. (2025). Microstructural and statistical analysis on mechanical performance of novel flattened end nylon fibre reinforced concrete. Sci. Rep., 15. · DOI
  34. Ahmad, 2021, Mechanical properties and durability assessment of nylon fiber reinforced self-compacting concrete, J. Eng. Fibers Fabr., 16, 15589250211062833
  35. Chandrasekhar, 2025, Development and performance analysis of PVA-polyester fiber reinforced cementitious composites incorporating manufactured sand, Eur. J. Environ. Civ. Eng., 29, 1628, 10.1080/19648189.2025.2450696 · DOI
  36. Alawar, 2009, Characterization of treated date palm tree fiber as composite reinforcement, Compos. Part B Eng., 40, 601, 10.1016/j.compositesb.2009.04.018 · DOI
  37. Adamu, 2022, Modeling and optimization of the mechanical properties of date fiber reinforced concrete containing silica fume using response surface methodology, Case Stud. Constr. Mater., 17, e01633
  38. Ali, 2022, Influence of Marble Powder and Polypropylene Fibers on the Strength and Durability Properties of Self-Compacting Concrete (SCC), Adv. Mater. Sci. Eng., 2022, 9553382, 10.1155/2022/9553382 · DOI
  39. Derdour, 2023, Effect of date palm and polypropylene fibers on the characteristics of self-compacting concretes: Comparative study, Frat. Ed Integrità Strutt., 17, 31, 10.3221/IGF-ESIS.64.03 · DOI
  40. Ahmad, J., Burduhos-Nergis, D.D., Arbili, M.M., Alogla, S.M., Majdi, A., and Deifalla, A.F. (2022). A review on failure modes and cracking behaviors of polypropylene fibers reinforced concrete. Buildings, 12. · DOI
  41. Osman, 2020, Effect of Using Natural and Polypropylene Fibers on Fresh and Hardened Concrete Properties, J. Mech. Civ. Eng., 17, 25
  42. Abdelmajeed Labib, W. (2019, January 15). Utilisation of date palm fibres in cement-based composites: A feasibility study. Proceedings of the IOP Conference Series: Materials Science And Engineering, Tatranske Matliare, High Tatras, Slovakia. · DOI
  43. 2002, Mechanical properties of date palm fiber reinforced composites, Appl. Compos. Mater., 9, 369, 10.1023/A:1020216906846 · DOI
  44. Labib, 2022, Plant-based fibres in cement composites: A conceptual framework, J. Eng. Fibers Fabr., 17, 15589250221078922
  45. Labib, 2020, Evaluation of hybrid fibre-reinforced concrete slabs in terms of punching shear, Constr. Build. Mater., 260, 119763, 10.1016/j.conbuildmat.2020.119763 · DOI
  46. Belarbi, 2013, Experimental investigation of the variability of concrete durability properties, Cem. Concr. Res., 45, 21, 10.1016/j.cemconres.2012.11.002 · DOI
  47. Amran, 2021, Long-term durability properties of geopolymer concrete: An in-depth review, Case Stud. Constr. Mater., 15, e00661
  48. Acosta-Calderon, S., Gordillo-Silva, P., García-Troncoso, N., Bompa, D.V., and Flores-Rada, J. (2022). Comparative evaluation of sisal and polypropylene fiber reinforced concrete properties. Fibers, 10. · DOI
  49. Rachedi, 2020, Thermal properties of plaster reinforced with date palm fibers, Civ. Environ. Eng., 16, 259, 10.2478/cee-2020-0025 · DOI
  50. Vantadori, 2019, Lightweight construction materials: Mortar reinforced with date-palm mesh fibres, Theor. Appl. Fract. Mech., 100, 39, 10.1016/j.tafmec.2018.12.011 · DOI
  51. Boumhaout, 2017, Thermomechanical characterization of a bio-composite building material: Mortar reinforced with date palm fibers mesh, Constr. Build. Mater., 135, 241, 10.1016/j.conbuildmat.2016.12.217 · DOI
  52. Adamu, 2023, Mechanical performance of date palm fiber-reinforced concrete modified with nano-activated carbon, Nanotechnol. Rev., 12, 20220564, 10.1515/ntrev-2022-0564 · DOI
  53. Abaeian, 2018, Effects of high temperatures on mechanical behavior of high strength concrete reinforced with high performance synthetic macro polypropylene (HPP) fibres, Constr. Build. Mater., 165, 631, 10.1016/j.conbuildmat.2018.01.064 · DOI
  54. Althoey, F., Hakeem, I.Y., Hosen, M.A., Qaidi, S., Isleem, H.F., Hadidi, H., Shahapurkar, K., Ahmad, J., and Ali, E. (2022). Behavior of concrete reinforced with date palm fibers. Materials, 15. · DOI
  55. Blazy, 2021, Polypropylene fiber reinforced concrete and its application in creating architectural forms of public spaces, Case Stud. Constr. Mater., 14, e00549
  56. Ozerkan, 2013, Mechanical performance and durability of treated palm fiber reinforced mortars, Int. J. Sustain. Built Environ., 2, 131, 10.1016/j.ijsbe.2014.04.002 · DOI
  57. Benmansour, 2014, Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building, Energy Build., 81, 98, 10.1016/j.enbuild.2014.05.032 · DOI
  58. Fallah, 2017, Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume, Constr. Build. Mater., 132, 170, 10.1016/j.conbuildmat.2016.11.100 · DOI
  59. Hannawi, 2016, Effect of different types of fibers on the microstructure and the mechanical behavior of ultra-high performance fiber-reinforced concretes, Compos. Part B Eng., 86, 214, 10.1016/j.compositesb.2015.09.059 · DOI

Metadata

Authors
Adamu, M., Labib, W. A., Ibrahim, Y. E., & Alanazi, H.
Affiliations
  • Prince Sultan University (SA)
  • Majmaah University (SA)
Corresponding author
  • Adamu, Musa
  • Alanazi, Hani
ORCID
Venue
Polymers
Publisher
MDPI AG
Published
2025-05-15
Volume
17
Issue
10
Pages
1350
ISSN
2073-4360 (ISSN-L)
DOI
10.3390/polym17101350
PMC
PMC12115324
OpenAlex
W4410400555
Cited by
22
References
57
Citations by year
2026: 15 · 2025: 7
FWCI
7.04
Type
journal article
Language
en
Open access
Licence
Locations
  • Polymers (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
Prince Sultan University, Riyadh Saudi Arabia
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
  • Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
  • Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
Keywords
hybrid fiber reinforced concrete, date palm fiber, polypropylene fibers, natural fiber reinforcement, tensile strength, flexural strength, splitting tensile strength, water absorption, pore volume, compressive strength, workability, fiber-matrix compatibility, durability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Mechanical Behavior and Durability Performance of Concrete Reinforced with Hybrid Date Palm and Polypropylene Polymer Fibers. https://app.cochat.ai/papers/10.3390/polym17101350
The paper
Adamu, M., Labib, W. A., Ibrahim, Y. E., & Alanazi, H. (2025). Mechanical Behavior and Durability Performance of Concrete Reinforced with Hybrid Date Palm and Polypropylene Polymer Fibers. Polymers. https://doi.org/10.3390/polym17101350