The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Antimicrobial Polymers in Solution and on Surfaces: Overview and Functional Principles
Open accessAbstract
The control of microbial infections is a very important issue in modern society. In general there are two ways to stop microbes from infecting humans or deteriorating materials—disinfection and antimicrobial surfaces. The first is usually realized by disinfectants, which are a considerable environmental pollution problem and also support the development of resistant microbial strains. Antimicrobial surfaces are usually designed by impregnation of materials with biocides that are released into the surroundings whereupon microbes are killed. Antimicrobial polymers are the up and coming new class of disinfectants, which can be used even as an alternative to antibiotics in some cases. Interestingly, antimicrobial polymers can be tethered to surfaces without losing their biological activity, which enables the design of surfaces that kill microbes without releasing biocides. The present review considers the working mechanisms of antimicrobial polymers and of contact-active antimicrobial surfaces based on examples of recent research as well as on multifunctional antimicrobial materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Antimicrobial peptides of multicellular organisms
Zasloff, M. (2002) · Nature · doi:10.1038/415389a · Cited by 8,457
Klevens, R. M. (2007) · JAMA · doi:10.1001/jama.298.15.1763 · Cited by 3,726 · cited 1×
“the majority of nosocomial infections and notably causes more deaths in the USA than HIV [13].”
BackgroundSilver bromide nanoparticle/polymer composites: dual action tunable antimicrobial materials
Sambhy, V., MacBride, M. M., Peterson, B. R., & Sen, A. (2006) · Journal of the American Chemical Society · doi:10.1021/ja061442z · Cited by 748
Permanent, nonleaching antibacterial surfaces: 1. Synthesis by atom transfer radical polymerization
Lee, S. B., Koepsel, R. R., Morley, S. W., Matyjaszewski, K., Sun, Y., & Russell, A. J. (2004) · Biomacromolecules · doi:10.1021/bm034352k · Cited by 545
LYSOSTAPHIN: A NEW BACTERIOLYTIC AGENT FOR THE STAPHYLOCOCCUS
Schindler, C. A., & Schuhardt, V. T. (1964) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.51.3.414 · Cited by 482
Two-level antibacterial coating with both release-killing and contact-killing capabilities
Li, Z., Lee, D., Sheng, X., Cohen, R. E., & Rubner, M. F. (2006) · Langmuir · doi:10.1021/la0622166 · Cited by 436 · cited 1×
“A similar behaviour could be afforded by the incorporation of silver nanoparticles into a LbL coating and finishing it with quaternary ammonium groups [130].”
BackgroundA Switchable Biocompatible Polymer Surface with Self‐Sterilizing and Nonfouling Capabilities
Cheng, G., Xue, H., Zhang, Z., Chen, S., & Jiang, S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200803570 · Cited by 371 · cited 1×
“coli by attaching poly(N,N-dimethyl-N-(ethoxycarbonylmethyl)-N-[2′-(methacryloyloxy)ethyl]-ammonium bromide) via ATRP [126].”
MethodSurface-bonded antimicrobial activity of an organosilicon quaternary ammonium chloride
Isquith, A. J., Abbott, E. A., & Walters, P. A. (1972) · Applied Microbiology · doi:10.1128/aem.24.6.859-863.1972 · Cited by 329
Polymeric coatings that inactivate both influenza virus and pathogenic bacteria
Haldar, J., An, D., Álvarez de Cienfuegos, L., Chen, J., & Klibanov, A. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0608803103 · Cited by 297
Huang, J., Koepsel, R. R., Murata, H., Wu, W., Lee, S. B., Kowalewski, T., Russell, A. J., & Matyjaszewski, K. (2008) · Langmuir · doi:10.1021/la8003933 · Cited by 231
Cited by
Antibacterial surfaces: the quest for a new generation of biomaterials
Hasan, J., Crawford, R. J., & Ivanova, E. P. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2013.01.017 · Cited by 955
Recent advances on antimicrobial wound dressing: A review
Simões, D., Miguel, S. P., Ribeiro, M. P., Coutinho, P., Mendonça, A. G., & Correia, I. J. (2018) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2018.02.022 · Cited by 935
Rizwan, M., Yahya, R., Hassan, A., Yar, M., Azzahari, A., Selvanathan, V., Sonsudin, F., & Abouloula, C. (2017) · Polymers · doi:10.3390/polym9040137 · Cited by 844
Antimicrobial Polymeric Materials with Quaternary Ammonium and Phosphonium Salts
Xue, Y., Xiao, H., & Zhang, Y. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16023626 · Cited by 578
Recent progress in marine foul-release polymeric nanocomposite coatings
Selim, M. S., Shenashen, M. A., El-Safty, S. A., Higazy, S. A., Selim, M. M., Isago, H., & Elmarakbi, A. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.02.001 · Cited by 530
Metadata
- Authors
- Siedenbiedel, F., & Tiller, J. C.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2012-01-09
- Volume
- 4
- Issue
- 1
- Pages
- 46-71
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2072084534
- Cited by
- 724
- References
- 11
- FWCI
- 20.85
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Antimicrobial Polymers in Solution and on Surfaces: Overview and Functional Principles. https://app.cochat.ai/papers/10.3390/polym4010046
- The paper
- Siedenbiedel, F., & Tiller, J. C. (2012). Antimicrobial Polymers in Solution and on Surfaces: Overview and Functional Principles. Polymers. https://doi.org/10.3390/polym4010046
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.