CoChat

Biogas Purification: A Comparison of Adsorption Performance in D4 Siloxane Removal Between Commercial Activated Carbons and Waste Wood-Derived Char Using Isotherm Equations

Open access

The DOI matches its Crossref record; 48 of the 49 references it cites were found in a registry or an index.

Abstract

Biogas production from organic waste could be an option to reduce landfill and pollutant emissions into air, water, and soil. These fuels contain several trace compounds that are crucial for highly efficient energy generators or gas injection into the grid. The ability of adsorbents to physically remove such adsorbates was investigated using adsorption isotherms at a constant temperature. We experimentally modelled isotherms for siloxane removal. Siloxanes were considered due to their high impact on energy generators performance even at low concentrations. Octamethylcyclotetrasiloxane was selected as a model compound and was tested using commercially available carbon and char derived from waste materials. The results show that recyclable material can be used in an energy production site and that char must be activated to improve its removal performance. The adsorption capacity is a function of specific surface area and porous volume rather than the elemental composition. The most common adsorption isotherms were employed to find the most appropriate isotherm to estimate the adsorption capacity and to compare the sorbents. The Dubinin-Radushkevich isotherm coupled with the Langmuir isotherm was found to be the best for estimating the adsorption capacity.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/pr7100774

Cites

48 of 48 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Experimental set-up for siloxane isotherm test.
Figure 1 Experimental set-up for siloxane isotherm test.CC-BY · From the PDF
Figure 2 Adsorption capacity values in relation with specific surface area (SSA), and microporous (micro) and mesoporous (meso) volumes. (x 10 ppm(v); Δ 5 ppm(v) ; □ 2 ppm(v); ◇ 1 ppm(v))
Figure 2 Adsorption capacity values in relation with specific surface area (SSA), and microporous (micro) and mesoporous (meso) volumes. (x 10 ppm(v); Δ 5 ppm(v) ; □ 2 ppm(v); ◇ 1 ppm(v))CC-BY · From the PDF
Figure 3 Langmuir isotherm for D4 removal with biochar, C64 and CKC. AC, activated carbon.
Figure 3 Langmuir isotherm for D4 removal with biochar, C64 and CKC. AC, activated carbon.CC-BY · From the PDF
Figure 4 Freundlich isotherm for D4 removal with biochar, C64, and CKC.
Figure 4 Freundlich isotherm for D4 removal with biochar, C64, and CKC.CC-BY · From the PDF
Figure 5 Dubinin-Radushkevich isotherm for D4 removal with biochar, C64 and CKC.
Figure 5 Dubinin-Radushkevich isotherm for D4 removal with biochar, C64 and CKC.CC-BY · From the PDF
Figure 6 Temkin isotherm for D4 removal with biochar, C64, and CKC.
Figure 6 Temkin isotherm for D4 removal with biochar, C64, and CKC.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 48 references

Research works printed but not linked: 4

  1. Rogers, K.A. (1973). Adsorption on activated carbon by hydrogen, methane and carbon dioxide gases and their mixtures at 212.deg.K to 301.deg.K and up tp 35 atmospheres. [Ph.D. Thesis, Georgia Institute of Technology].
  2. Do, D.D. (1998). Adsorption Analysis: Equilibria and Kinetics, Imperial College Press. · doi:10.1142/9781860943829 · Paper page
  3. Adamson, A.W., and Gast, A.P. (1997). Physical Chemistry Of Surfaces, Wiley, Interscience Publishers, Inc.. [6th ed.].
  4. Temkin, 1940, Kinetics of ammonia synthesis on promoted iron catalyst, Acta Phys. Chim. USSR, 12, 327

Cited by

See all 49

Metadata

Authors
Papurello, D., Gandiglio, M., Kafashan, J., & Lanzini, A.
Affiliations
  • Politecnico di Torino (IT)
  • Agricultural Research & Education Organization (IR)
Corresponding author
Papurello, Davide
Venue
Processes
Publisher
MDPI AG
Published
2019-10-22
Volume
7
Issue
10
Pages
774
ISSN
2227-9717 (ISSN-L)
OpenAlex
W2982280487
Cited by
48
References
49
Citations by year
2026: 1 · 2025: 7 · 2024: 9 · 2023: 10 · 2022: 10 · 2021: 5 · 2020: 6
FWCI
1.90
Type
journal article
Language
en
Open access
Locations
  • Processes (publishedVersion, cc-by)
  • PORTO@Iris (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
European Union - DEMOSOFC (671470)
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
Keywords
biogas upgrading, siloxane removal, octamethylcyclotetrasiloxane, activated carbon, adsorption isotherms, Dubinin-Radushkevich isotherm, Langmuir isotherm, adsorption capacity, specific surface area, char activation, waste valorization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Biogas Purification: A Comparison of Adsorption Performance in D4 Siloxane Removal Between Commercial Activated Carbons and Waste Wood-Derived Char Using Isotherm Equations. https://app.cochat.ai/papers/10.3390/pr7100774
The paper
Papurello, D., Gandiglio, M., Kafashan, J., & Lanzini, A. (2019). Biogas Purification: A Comparison of Adsorption Performance in D4 Siloxane Removal Between Commercial Activated Carbons and Waste Wood-Derived Char Using Isotherm Equations. Processes. https://doi.org/10.3390/pr7100774

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.