RadCalNet: A Radiometric Calibration Network for Earth Observing Imagers Operating in the Visible to Shortwave Infrared Spectral Range
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Vicarious calibration approaches using in situ measurements saw first use in the early 1980s and have since improved to keep pace with the evolution of the radiometric requirements of the sensors that are being calibrated. The advantage of in situ measurements for vicarious calibration is that they can be carried out with traceable and quantifiable accuracy, making them ideal for interconsistency studies of on-orbit sensors. The recent development of automated sites to collect the in situ data has led to an increase in the available number of datasets for sensor calibration. The current work describes the Radiometric Calibration Network (RadCalNet) that is an effort to provide automated surface and atmosphere in situ data as part of a network including multiple sites for the purpose of optical imager radiometric calibration in the visible to shortwave infrared spectral range. The key goals of RadCalNet are to standardize protocols for collecting data, process to top-of-atmosphere reflectance, and provide uncertainty budgets for automated sites traceable to the international system of units. RadCalNet is the result of efforts by the RadCalNet Working Group under the umbrella of the Committee on Earth Observation Satellites (CEOS) Working Group on Calibration and Validation (WGCV) and the Infrared Visible Optical Sensors (IVOS). Four radiometric calibration instrumented sites located in the USA, France, China, and Namibia are presented here that were used as initial sites for prototyping and demonstrating RadCalNet. All four sites rely on collection of data for assessing the surface reflectance as well as atmospheric data over that site. The data are converted to top-of-atmosphere reflectance within RadCalNet and provided through a web portal to allow users to either radiometrically calibrate or verify the calibration of their sensors of interest. Top-of-atmosphere reflectance data with associated uncertainties are available at 10 nm intervals over the 400 nm to 1000 nm spectral range at 30 min intervals for a nadir-viewing geometry. An example is shown demonstrating how top-of-atmosphere data from RadCalNet can be used to determine the interconsistency between two sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Giles, D. M., Sinyuk, A., Sorokin, M. G., Schafer, J. S., Smirnov, A., Slutsker, I., Eck, T. F., Holben, B. N., Lewis, J. R., Campbell, J. R., et al. (2019) · Atmospheric Measurement Techniques · doi:10.5194/amt-12-169-2019 · Cited by 1,396
Slater, P. N., Biggar, S. F., Holm, R. G., Jackson, R. D., Mao, Y., Moran, M. S., Palmer, J. M., & Yuan, B. (1987) · Remote Sensing of Environment · doi:10.1016/0034-4257(87)90026-5 · Cited by 428
Nimbus-7 Coastal Zone Color Scanner: System Description and Initial Imagery
Hovis, W. A., Clark, D. K., Anderson, F., Austin, R. W., Wilson, W. H., Baker, E. T., Ball, D., Gordon, H. R., Mueller, J. L., El-Sayed, S. Z., et al. (1980) · Science · doi:10.1126/science.210.4465.60 · Cited by 394 · cited 1×
“One of the first applications of such techniques dates to [7], who measured the radiance above a ground target from a high-altitude aircraft to verify the degradation of the response of the Coastal Zone Color Scanner’s shorter wavelength bands [8].”
BackgroundApplications of Spectral Band Adjustment Factors (SBAF) for Cross-Calibration
Chander, G., Mishra, N., Helder, D. L., Aaron, D. B., Angal, A., Choi, T., Xiong, X., & Doelling, D. R. (2013) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2012.2228007 · Cited by 188 · cited 4×
“One advantage to RadCalNet is that no spectral band correction factor [41] is needed because the results for each sensor already include the sensor SRF as part of the band weighting.”
BackgroundInfluentialThe Ground-Based Absolute Radiometric Calibration of Landsat 8 OLI
Czapla-Myers, J., McCorkel, J., Anderson, N., Thome, K., Biggar, S., Helder, D., Aaron, D., Leigh, L., & Mishra, N. (2015) · Remote Sensing · doi:10.3390/rs70100600 · Cited by 162 · cited 1×
“Results from previous automated sites [24] and [25] have shown that they can achieve uncertainties similar to collection [26] The RadCalNet concept has been developed to address temporal sampling issues, and to provide global consistency, by networking the measurements from several automated sites and making these dat…”
MethodSelf-citationResults of POLDER in-flight calibration
Hagolle, O., Goloub, P., Deschamps, P., Cosnefroy, H., Briottet, X., Bailleul, T., Nicolas, J., Parol, F., Lafrance, B., & Herman, M. (1999) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/36.763266 · Cited by 161 · cited 1×
“Vicarious techniques concentrating on radiometric calibration in the visible to short-wave infrared spectral range have been developed to provide calibration for a single sensor, including absolute [1], band-to-band [2], and detector-to-detector relative for a single band [3,4].”
BackgroundTeillet, P., Fedosejevs, G., Gauthier, R. P., O’Neill, N. T., Thome, K. J., Biggar, S. F., Ripley, H. T., & Meygret, A. (2001) · Remote Sensing of Environment · doi:10.1016/s0034-4257(01)00211-5 · Cited by 109 · cited 1×
“developed a variation of the approach to account for the unavoidable small differences in view and solar geometry [10].”
BackgroundSelf-citationThome, K. J., Biggar, S. F., & Wisniewski, W. T. (2003) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2003.813210 · Cited by 96 · cited 1×
“Such an approach was used to compare data from a wide array of sensors viewing the Railroad Valley instrumented site on a single day [11] and has been used to cross-compare data from sensors viewing the site on different dates [12].”
MethodSelf-citationVicarious radiometric calibration of eo-1 sensors by reference to high-reflectance ground targets
Biggar, S. F., Thome, K. J., & Wisniewski, W. T. (2003) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2003.813211 · Cited by 91
Self-citationRadiometric characterization of IKONOS multispectral imagery
Pagnutti, M. A., Ryan, R. E., Kelly, M., Holekamp, K., Zanoni, V., Thome, K. J., & Schiller, S. J. (2003) · Remote Sensing of Environment · doi:10.1016/j.rse.2003.07.008 · Cited by 79
Self-citation
Cited by
KAUSTSat: Saudi Arabia's First Hyperspectral CubeSat Mission for Earth Observation
Angulo, V., Scilla, D., Rodriguez, J. L., Alsalem, N., Johansen, K., & McCabe, M. F. (2026) · Earth and Space Science · doi:10.1029/2025ea004729
“These sites are part of the Radiometric Calibration Network (RadCalNet; Bouvet et al., 2019), which provides continuous, traceable surface reflectance data for satellite calibration and inter‐mission comparisons.”
Metadata
- Authors
- Bouvet, M., Thome, K., Berthelot, B., Bialek, A., Czapla-Myers, J., Fox, N., Goryl, P., Henry, P., Ma, L., Marcq, S., Meygret, A., Wenny, B., & Woolliams, E.
- Venue
- Remote Sensing
- Publisher
- MDPI AG
- Published
- 2019-10-16
- Volume
- 11
- Issue
- 20
- Pages
- 2401
- ISSN
- 2072-4292 (ISSN-L)
- OpenAlex
- W2980855365
- Cited by
- 229
- References
- 13
- FWCI
- 17.75
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.