The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Sequential Fuzzy Diagnosis Method for Motor Roller Bearing in Variable Operating Conditions Based on Vibration Analysis
Open accessAbstract
A novel intelligent fault diagnosis method for motor roller bearings which operate under unsteady rotating speed and load is proposed in this paper. The pseudo Wigner-Ville distribution (PWVD) and the relative crossing information (RCI) methods are used for extracting the feature spectra from the non-stationary vibration signal measured for condition diagnosis. The RCI is used to automatically extract the feature spectrum from the time-frequency distribution of the vibration signal. The extracted feature spectrum is instantaneous, and not correlated with the rotation speed and load. By using the ant colony optimization (ACO) clustering algorithm, the synthesizing symptom parameters (SSP) for condition diagnosis are obtained. The experimental results shows that the diagnostic sensitivity of the SSP is higher than original symptom parameter (SP), and the SSP can sensitively reflect the characteristics of the feature spectrum for precise condition diagnosis. Finally, a fuzzy diagnosis method based on sequential inference and possibility theory is also proposed, by which the conditions of the machine can be identified sequentially as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zadeh, L. A. (1965) · Information and Control · doi:10.1016/s0019-9958(65)90241-x · Cited by 67,855
Zadeh, L. A. (1996) · Cited by 46,852
Ant colony system: a cooperative learning approach to the traveling salesman problem
Dorigo, M., & Gambardella, L. M. (1997) · IEEE Transactions on Evolutionary Computation · doi:10.1109/4235.585892 · Cited by 8,081
(2007) · Handbook of Approximation Algorithms and Metaheuristics · doi:10.1201/9781420010749-33 · Cited by 6,607
Dorigo, M., & Stützle, T. (2004) · The MIT Press eBooks · doi:10.7551/mitpress/1290.001.0001 · Cited by 3,330
Possibility theory: An approach to computerized processing of uncertainty
Tzvieli, A. (1990) · Journal of the American Society for Information Science · doi:10.1002/(sici)1097-4571(199003)41:2<153::aid-asi16>3.0.co;2-u · Cited by 2,119
Classification With Ant Colony Optimization
Martens, D., De Backer, M., Haesen, R., Vanthienen, J., Snoeck, M., & Baesens, B. (2007) · IEEE Transactions on Evolutionary Computation · doi:10.1109/tevc.2006.890229 · Cited by 437
Blum, C. (2005) · Computers & Operations Research · doi:10.1016/j.cor.2003.11.018 · Cited by 421
BAYDAR, N., & BALL, A. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2000.1338 · Cited by 323 · cited 1×
“Reference [12] examines whether acoustic signals can be used to effectively detect the various local faults in gearboxes using the smoothed PWVD. Reference [13] applies a PWVD to identify the influence of the fluctuating load conditions on a gearbox.”
MethodMechanical Load Fault Detection in Induction Motors by Stator Current Time-Frequency Analysis
Blodt, M., Chabert, M., Regnier, J., & Faucher, J. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.882631 · Cited by 267
Study of Rotor Faults in Induction Motors Using External Magnetic Field Analysis
Ceban, A., Pusca, R., & Romary, R. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2163285 · Cited by 249
An Amplitude Modulation Detector for Fault Diagnosis in Rolling Element Bearings
Stack, J. R., Harley, R. G., & Habetler, T. G. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.834971 · Cited by 224
Rosero, J. A., Romeral, L., Ortega, J. A., & Rosero, E. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011580 · Cited by 214
Ant-Based Clustering and Topographic Mapping
Handl, J., Knowles, J., & Dorigo, M. (2006) · Artificial Life · doi:10.1162/106454606775186400 · Cited by 207
Nonstationary Motor Fault Detection Using Recent Quadratic Time–Frequency Representations
Rajagopalan, S., Restrepo, J. A., Aller, J. M., Habetler, T. G., & Harley, R. G. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.921431 · Cited by 161
Stander, C., Heyns, P. S., & SCHOOMBIE, W. (2002) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2002.1479 · Cited by 157
Fault-signature modeling and detection of inner-race bearing faults
Stack, J. R., Habetler, T. G., & Harley, R. G. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.861365 · Cited by 128
Fault Detection of Linear Bearings in Brushless AC Linear Motors by Vibration Analysis
Bianchini, C., Immovilli, F., Cocconcelli, M., Rubini, R., & Bellini, A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098354 · Cited by 126
Detection of Induction Motor Faults in Inverter Drives Using Inverter Input Current Analysis
Georgakopoulos, I. P., Mitronikas, E. D., & Safacas, A. N. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2093476 · Cited by 89
Fuzzy Diagnosis Method for Rotating Machinery in Variable Rotating Speed
Wang, H., & Chen, P. (2010) · IEEE Sensors Journal · doi:10.1109/jsen.2010.2049103 · Cited by 62
Self-citationChen, P., Taniguchi, M., TOYOTA, T., & He, Z. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2003.11.004 · Cited by 50
Self-citationRajagopalan, S., Restrepo, J. A., Aller, J. M., Habetler, T. G., & Harley, R. G. (2005) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2005.4662511 · Cited by 44
Li, K., Chen, P., & Wang, S. (2012) · Sensors · doi:10.3390/s120505919 · Cited by 34
Self-citationBearing damage detection in permanent magnet synchronous machines
Pacas, M., Villwock, S., & Dietrich, R. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316091 · Cited by 28
Cited by
Zhao, Z., Li, T., Wu, J., Sun, C., Wang, S., Yan, R., & Chen, X. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.08.010 · Cited by 688
Zhao, Z., Zhang, Q., Yu, X., Sun, C., Wang, S., Yan, R., & Chen, X. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3116309 · Cited by 526
Zhao, C., Zio, E., & Shen, W. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.109964 · Cited by 521
A Review on Vibration-Based Condition Monitoring of Rotating Machinery
Tiboni, M., Remino, C., Bussola, R., & Amici, C. (2022) · Applied Sciences · doi:10.3390/app12030972 · Cited by 314
Solís-Martín, D., Galán-Páez, J., & Borrego-Díaz, J. (2025) · Mathematics · doi:10.3390/math13040555 · Cited by 7
Metadata
- Authors
- Li, K., Ping, X., Wang, H., Chen, P., & Cao, Y.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2013-06-21
- Volume
- 13
- Issue
- 6
- Pages
- 8013-8041
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W2010619950
- Cited by
- 294
- References
- 24
- FWCI
- 1.75
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.