The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Smartphone-Based Indoor Localization with Bluetooth Low Energy Beacons
Open accessAbstract
Indoor wireless localization using Bluetooth Low Energy (BLE) beacons has attracted considerable attention after the release of the BLE protocol. In this paper, we propose an algorithm that uses the combination of channel-separate polynomial regression model (PRM), channel-separate fingerprinting (FP), outlier detection and extended Kalman filtering (EKF) for smartphone-based indoor localization with BLE beacons. The proposed algorithm uses FP and PRM to estimate the target’s location and the distances between the target and BLE beacons respectively. We compare the performance of distance estimation that uses separate PRM for three advertisement channels (i.e., the separate strategy) with that use an aggregate PRM generated through the combination of information from all channels (i.e., the aggregate strategy). The performance of FP-based location estimation results of the separate strategy and the aggregate strategy are also compared. It was found that the separate strategy can provide higher accuracy; thus, it is preferred to adopt PRM and FP for each BLE advertisement channel separately. Furthermore, to enhance the robustness of the algorithm, a two-level outlier detection mechanism is designed. Distance and location estimates obtained from PRM and FP are passed to the first outlier detection to generate improved distance estimates for the EKF. After the EKF process, the second outlier detection algorithm based on statistical testing is further performed to remove the outliers. The proposed algorithm was evaluated by various field experiments. Results show that the proposed algorithm achieved the accuracy of <2.56 m at 90% of the time with dense deployment of BLE beacons (1 beacon per 9 m), which performs 35.82% better than <3.99 m from the Propagation Model (PM) + EKF algorithm and 15.77% more accurate than <3.04 m from the FP + EKF algorithm. With sparse deployment (1 beacon per 18 m), the proposed algorithm achieves the accuracies of <3.88 m at 90% of the time, which performs 49.58% more accurate than <8.00 m from the PM + EKF algorithm and 21.41% better than <4.94 m from the FP + EKF algorithm. Therefore, the proposed algorithm is especially useful to improve the localization accuracy in environments with sparse beacon deployment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Survey of Wireless Indoor Positioning Techniques and Systems
Liu, H., Darabi, H., Banerjee, P., & Liu, J. (2007) · IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2007.905750 · Cited by 4,098
Location Fingerprinting with Bluetooth Low Energy Beacons
Faragher, R., & Harle, R. (2015) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2015.2430281 · Cited by 879
Robust Indoor Positioning Provided by Real-Time RSSI Values in Unmodified WLAN Networks
Mazuelas, S., Bahillo, A., Lorenzo, R. M., Fernandez, P., Lago, F. A., Garcia, E., Blas, J., & Abril, E. J. (2009) · IEEE Journal of Selected Topics in Signal Processing · doi:10.1109/jstsp.2009.2029191 · Cited by 429
Vision-based location positioning using augmented reality for indoor navigation
Kim, J., & Jun, H. (2008) · IEEE Transactions on Consumer Electronics · doi:10.1109/tce.2008.4637573 · Cited by 217
Indoor Localization Based on Curve Fitting and Location Search Using Received Signal Strength
Wang, B., Zhou, S., Liu, W., & Mo, Y. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327595 · Cited by 199
Zhuang, Y., & El‐Sheimy, N. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2015.2477444 · Cited by 151
Self-citationDoes BTLE measure up against WiFi? A comparison of indoor location performance
Zhao, X., Xiao, Z., Markham, A., Trigoni, N., & Ren, Y. (2014) · Oxford University Research Archive (ORA) (University of Oxford) · Cited by 140
Dynamic Ultrasonic Hybrid Localization System for Indoor Mobile Robots
Kim, S. J., & Kim, B. K. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2216235 · Cited by 133
Zhuang, Y., Syed, Z., Georgy, J., & El‐Sheimy, N. (2015) · Pervasive and Mobile Computing · doi:10.1016/j.pmcj.2015.02.001 · Cited by 114
Self-citationA stigmergic approach to indoor localization using Bluetooth Low Energy beacons
Palumbo, F., Barsocchi, P., Chessa, S., & Augusto, J. C. (2015) · IEEE International Conference on Advanced Video and Signal Based Surveillance (AVSS) · doi:10.1109/avss.2015.7301734 · Cited by 112
Research works printed but not linked: 12
- Dwivedi, 2013, Characterization of a flexible UWB sensor for indoor localization, IEEE Trans. Instrum. Meas., 62, 905, 10.1109/TIM.2013.2243501 · doi:10.1109/tim.2013.2243501
- Colombo, 2014, Flexible indoor localization and tracking based on a wearable platform and sensor data fusion, IEEE Trans. Instrum. Meas., 63, 864, 10.1109/TIM.2013.2283546 · doi:10.1109/tim.2013.2283546
- Li, 2015, Autonomous calibration of MEMS Gyros in consumer portable devices, IEEE Sens. J., 15, 4062, 10.1109/JSEN.2015.2410756 · doi:10.1109/jsen.2015.2410756
- Wang, 2015, An improved PDR/magnetometer/floor map integration algorithm for ubiquitous positioning using the adaptive unscented kalman filter, ISPRS Int. J. Geo-Inf., 4, 2638, 10.3390/ijgi4042638 · doi:10.3390/ijgi4042638
- Lan, 2015, A novel kalman filter with state constraint approach for the integration of multiple pedestrian navigation systems, Micromachines, 6, 926, 10.3390/mi6070926 · doi:10.3390/mi6070926
- Aicardi, 2014, Sensors integration for smartphone navigation: Performances and future challenges, Int. Arch. Photogram. Remote Sens. Spat. Inf. Sci., 40, 9, 10.5194/isprsarchives-XL-3-9-2014 · doi:10.5194/isprsarchives-xl-3-9-2014
- Zhuang, Y., Shen, Z., Syed, Z., Georgy, J., Syed, H., and El-Sheimy, N. (2014, January 5–8). Autonomous wlan heading and position for smartphones. Proceedings of the 2014 IEEE/ION Position, Location and Navigation Symposium, PLANS 2014, Monterey, CA, USA. · doi:10.1109/plans.2014.6851481
- Li, 2016, A hybrid WiFi/magnetic matching/PDR approach for indoor navigation with smartphone sensors, IEEE Commun. Lett., 20, 169, 10.1109/LCOMM.2015.2496940 · doi:10.1109/lcomm.2015.2496940
- Lohan, E.S., Talvitie, J., Figueiredo e Silva, P., Nurminen, H., Ali-Loytty, S., and Piche, R. (2015, January 22–24). Received signal strength models for wlan and ble-based indoor positioning in multi-floor buildings. Proceedings of the International Conference on Localization and GNSS (ICL-GNSS), Gothenburg, Sweden. · doi:10.1109/icl-gnss.2015.7217154
- Feng, Y., Yuxin, Z., and Gunnarsson, F. (2015, January 6–9). Proximity report triggering threshold optimization for network-based indoor positioning. Proceedings of the 18th International Conference on Information Fusion (Fusion), Washington, DC, USA.
- Pei, 2010, Using inquiry-based bluetooth RSSI probability distributions for indoor positioning, J. Glob. Position. Syst., 9, 122
- Teunissen, P.J.G. (1990, January 20–23). Quality control in integrated navigation systems. Proceedings of the IEEE PLANS ’90, Position Location and Navigation Symposium Record. The 1990’s—A Decade of Excellence in the Navigation Sciences, Las Vegas, NV, USA.
Cited by
A Survey of Positioning Systems Using Visible LED Lights
Zhuang, Y., Hua, L., Qi, L., Yang, J., Cao, P., Cao, Y., Wu, Y., Thompson, J., & Haas, H. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2806558 · Cited by 632
Self-citationA research agenda for augmented and virtual reality in architecture, engineering and construction
Davila Delgado, J. M., Oyedele, L., Demian, P., & Beach, T. (2020) · Advanced Engineering Informatics · doi:10.1016/j.aei.2020.101122 · Cited by 486
Indoor navigation: state of the art and future trends
El-Sheimy, N., & Li, Y. (2021) · Satellite Navigation · doi:10.1186/s43020-021-00041-3 · Cited by 272
Self-citationZhuang, Y., Sun, X., Li, Y., Huai, J., Hua, L., Yang, X., Cao, X., Zhang, P., Cao, Y., Qi, L., et al. (2023) · Information Fusion · doi:10.1016/j.inffus.2023.01.025 · Cited by 262
Self-citation6G: Connecting Everything by 1000 Times Price Reduction
Zhang, S., Xiang, C., & Xu, S. (2020) · IEEE Open Journal of Vehicular Technology · doi:10.1109/ojvt.2020.2980003 · Cited by 105
Metadata
- Authors
- Zhuang, Y., Yang, J., Li, Y., Qi, L., & El-Sheimy, N.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2016-04-26
- Volume
- 16
- Issue
- 5
- Pages
- 596
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W2343107556
- Cited by
- 449
- References
- 20
- FWCI
- 27.75
- Type
- journal article
- Language
- en
- Open access
- gold
- Funders
- National Natural Science Foundation of China (61474022)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Smartphone-Based Indoor Localization with Bluetooth Low Energy Beacons. https://app.cochat.ai/papers/10.3390/s16050596
- The paper
- Zhuang, Y., Yang, J., Li, Y., Qi, L., & El-Sheimy, N. (2016). Smartphone-Based Indoor Localization with Bluetooth Low Energy Beacons. Sensors. https://doi.org/10.3390/s16050596
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.