CoChat

III–V-on-Silicon Photonic Integrated Circuits for Spectroscopic Sensing in the 2–4 μm Wavelength Range

Open access

The DOI matches its Crossref record; 83 of the 83 references it cites were found in a registry or an index.

Abstract

The availability of silicon photonic integrated circuits (ICs) in the 2–4 μm wavelength range enables miniature optical sensors for trace gas and bio-molecule detection. In this paper, we review our recent work on III–V-on-silicon waveguide circuits for spectroscopic sensing in this wavelength range. We first present results on the heterogeneous integration of 2.3 μm wavelength III–V laser sources and photodetectors on silicon photonic ICs for fully integrated optical sensors. Then a compact 2 μm wavelength widely tunable external cavity laser using a silicon photonic IC for the wavelength selective feedback is shown. High-performance silicon arrayed waveguide grating spectrometers are also presented. Further we show an on-chip photothermal transducer using a suspended silicon-on-insulator microring resonator used for mid-infrared photothermal spectroscopy.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/s17081788

Cites

83 of 83 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 (a) Schematic of two silicon photonic configurations to realize an integrated on-chip mid-infrared absorption spectroscopy sensor. Broadband source and spectrometer, best suited for liquid and solid analytes; (b) Tunable single mode laser source for trace gas detection.
Figure 1 (a) Schematic of two silicon photonic configurations to realize an integrated on-chip mid-infrared absorption spectroscopy sensor. Broadband source and spectrometer, best suited for liquid and solid analytes; (b) Tunable single mode laser source for trace gas detection.CC BY · PubMed Central
Figure 2 Transparent window of silicon and silicon dioxide, and emission wavelength coverage of semiconductor lasers based on different III–V active regions. InP-based type-I, type-II and GaSb-based type-I quantum well (QW) diode lasers, GaSb-based interband cascade lasers (ICLs), and QCLs are included.
Figure 2 Transparent window of silicon and silicon dioxide, and emission wavelength coverage of semiconductor lasers based on different III–V active regions. InP-based type-I, type-II and GaSb-based type-I quantum well (QW) diode lasers, GaSb-based interband cascade lasers (ICLs), and QCLs are included.CC BY · PubMed Central
Figure 3 (a) Schematic drawing and (b) scanning electron microscopy (SEM) image of the cross section of a heterogeneously integrated III–V-on-silicon type-II active device.
Figure 3 (a) Schematic drawing and (b) scanning electron microscopy (SEM) image of the cross section of a heterogeneously integrated III–V-on-silicon type-II active device.CC BY · PubMed Central
Figure 4 (a) Schematic of an InP-based type-II DFB laser heterogeneously integrated on a silicon waveguide, the simulated mode intensity distribution in different sections is also included; (b) simulated coupling efficiency of a 180 μm long III–V/silicon SSC as a function of the III–V taper tip width. The inset figure shows the fundamental mode intensity evolution of the SSC with 0.5 μm wide III–V taper tip; (c) calculated coupling strength of the DFB grating as a function of the DVS-BCB thickness for three different etch depths (150, 180, 210 nm) in the 400 nm silicon device layer.
Figure 4 (a) Schematic of an InP-based type-II DFB laser heterogeneously integrated on a silicon waveguide, the simulated mode intensity distribution in different sections is also included; (b) simulated coupling efficiency of a 180 μm long III–V/silicon SSC as a function of the III–V taper tip width. The inset figure shows the fundamental mode intensity evolution of the SSC with 0.5 μm wide III–V taper tip; (c) calculated coupling strength of the DFB grating as a function of the DVS-BCB thickness for three different etch depths (150, 180, 210 nm) in the 400 nm silicon device layer.CC BY · PubMed Central
Figure 5 (a) Continuous-wave (CW) light-current-voltage (L-I-V) curve of a III–V-on-silicon DFB laser with grating period of 348 nm; (b) emission spectrum of the DFB laser driven with 190 mA bias current at 10 °C.
Figure 5 (a) Continuous-wave (CW) light-current-voltage (L-I-V) curve of a III–V-on-silicon DFB laser with grating period of 348 nm; (b) emission spectrum of the DFB laser driven with 190 mA bias current at 10 °C.CC BY · PubMed Central
Figure 6 (a) Evolution of the DFB laser emission spectrum with increasing heat-sink temperature under 190 mA bias current, (b) with increasing bias current at 5 °C. The inset figure shows the dependence of the lasing wavelength on (a) temperature and (b) bias current at 5 °C, 10 °C, 15 °C; (c) direct TDLAS measurement of CO and the corresponding HITRAN spectrum.
Figure 6 (a) Evolution of the DFB laser emission spectrum with increasing heat-sink temperature under 190 mA bias current, (b) with increasing bias current at 5 °C. The inset figure shows the dependence of the lasing wavelength on (a) temperature and (b) bias current at 5 °C, 10 °C, 15 °C; (c) direct TDLAS measurement of CO and the corresponding HITRAN spectrum.CC BY · PubMed Central
Figure 7 (a) Emission spectra of six 1000 μm-long DFB lasers with different silicon grating period in an array; (b) evolution of the emission spectrum with bias current for four 700 μm long DFB lasers with different III–V waveguide widths in an array.
Figure 7 (a) Emission spectra of six 1000 μm-long DFB lasers with different silicon grating period in an array; (b) evolution of the emission spectrum with bias current for four 700 μm long DFB lasers with different III–V waveguide widths in an array.CC BY · PubMed Central
Figure 8 (a) Schematic of an adiabatically-coupled photodetector integrated on a silicon waveguide; (b) mode intensity distribution in a longitudinal cross section of the III–V/silicon taper taking the active region absorption into account; (c) schematic cross-section of a grating-assisted III–V-on-silicon photodetector.
Figure 8 (a) Schematic of an adiabatically-coupled photodetector integrated on a silicon waveguide; (b) mode intensity distribution in a longitudinal cross section of the III–V/silicon taper taking the active region absorption into account; (c) schematic cross-section of a grating-assisted III–V-on-silicon photodetector.CC BY · PubMed Central
Figure 9 (a) I-V curve of the heterogeneously integrated adiabatic-taper-based photodetector in the dark, the inset shows the dark current of the device from −1 V to 0 V; (b) I-V curve of the photodetector under different waveguide-coupled input powers at a wavelength of 2.35 μm.
Figure 9 (a) I-V curve of the heterogeneously integrated adiabatic-taper-based photodetector in the dark, the inset shows the dark current of the device from −1 V to 0 V; (b) I-V curve of the photodetector under different waveguide-coupled input powers at a wavelength of 2.35 μm.CC BY · PubMed Central
Figure 10 Schematic of a GaSb/silicon hybrid external cavity laser.
Figure 10 Schematic of a GaSb/silicon hybrid external cavity laser.CC BY · PubMed Central
Figure 11 (a) Amplified spontaneous emission coupled from the GaSb-based SLD to a silicon waveguide; (b) superimposed spectra of the hybrid laser by thermally tuning only one MRR; (c) both MRRs and (d) phase shifter.
Figure 11 (a) Amplified spontaneous emission coupled from the GaSb-based SLD to a silicon waveguide; (b) superimposed spectra of the hybrid laser by thermally tuning only one MRR; (c) both MRRs and (d) phase shifter.CC BY · PubMed Central
Figure 12 (a) Microscope image of a 2.3 μm silicon arrayed waveguide grating (AWG) spectrometer; the measured spectral responses of all the channels in three AWGs operating at different wavelengths: (b) 2.3 μm; (c) 3.3 μm and (d) 3.8 μm.
Figure 12 (a) Microscope image of a 2.3 μm silicon arrayed waveguide grating (AWG) spectrometer; the measured spectral responses of all the channels in three AWGs operating at different wavelengths: (b) 2.3 μm; (c) 3.3 μm and (d) 3.8 μm.CC BY · PubMed Central
Figure 13 Transmission of four different SOI AWGs operating in the 3.3 μm wavelength range with different channel spacing. The insertion loss (2–3 dB) and crosstalk levels (20–21 dB) are indicated by the dashed lines. The high-resolution (50 GHz) AWG can be used as a mid-infrared DFB laser array multiplexer.
Figure 13 Transmission of four different SOI AWGs operating in the 3.3 μm wavelength range with different channel spacing. The insertion loss (2–3 dB) and crosstalk levels (20–21 dB) are indicated by the dashed lines. The high-resolution (50 GHz) AWG can be used as a mid-infrared DFB laser array multiplexer.CC BY · PubMed Central
Figure 14 (a) Microscope image of the 2.3 μm AWG spectrometer integrated with a InP-based type-II quantum well photodetector array; (b) wire bonded III–V-on-silicon AWG spectrometers on a PCB; (c) photo-response of the 2.3 μm AWG and (d) 3.8 μm III–V-on-silicon AWG spectrometer.
Figure 14 (a) Microscope image of the 2.3 μm AWG spectrometer integrated with a InP-based type-II quantum well photodetector array; (b) wire bonded III–V-on-silicon AWG spectrometers on a PCB; (c) photo-response of the 2.3 μm AWG and (d) 3.8 μm III–V-on-silicon AWG spectrometer.CC BY · PubMed Central
Figure 15 Schematic of the photo-thermal sensing principle. A modulated mid-infrared pump beam is absorbed by the analyte which causes a local temperature change of the microring waveguide. The thermo-optic effect changes the effective index of the waveguide mode, hereby changing the resonance wavelength λres of the microring. For a given fixed probe wavelength λprobe, the change in λres produces a change in probe power ΔPprobe which is measured using a near-infrared detector. The absorption spectrum of the analyte can be reconstructed by scanning the pump wavelength and recording the maximum probe modulation ΔPprobe,max.
Figure 15 Schematic of the photo-thermal sensing principle. A modulated mid-infrared pump beam is absorbed by the analyte which causes a local temperature change of the microring waveguide. The thermo-optic effect changes the effective index of the waveguide mode, hereby changing the resonance wavelength λres of the microring. For a given fixed probe wavelength λprobe, the change in λres produces a change in probe power ΔPprobe which is measured using a near-infrared detector. The absorption spectrum of the analyte can be reconstructed by scanning the pump wavelength and recording the maximum probe modulation ΔPprobe,max.CC BY · PubMed Central
Figure 16 Microscope image of the SOI MRR suspended on BOX membrane with AZ5214 photoresist as mock-up analyte: (a) top and (b) bottom view; (c) The measured photo-thermal signal is scaled to calculate the absorption coefficient of the analyte and is compared to FTIR measurement. The FTIR signal is collected in reflection at the Brewster angle and TM polarization and is used with the formula in the inset to estimate the absorption coefficient; (d) A tilted SEM image with false coloring shows the various regions of the PIC; (e) A schematic cross section of the suspended MRR is given.
Figure 16 Microscope image of the SOI MRR suspended on BOX membrane with AZ5214 photoresist as mock-up analyte: (a) top and (b) bottom view; (c) The measured photo-thermal signal is scaled to calculate the absorption coefficient of the analyte and is compared to FTIR measurement. The FTIR signal is collected in reflection at the Brewster angle and TM polarization and is used with the formula in the inset to estimate the absorption coefficient; (d) A tilted SEM image with false coloring shows the various regions of the PIC; (e) A schematic cross section of the suspended MRR is given.CC BY · PubMed Central
Figure 17 Schematic of a possible free-space measurement configuration. The probe and pump sources flood-illuminate the chip from a certain distance, e.g., 30 cm. The SOI-chip is capped with a reflective or absorbing second layer (e.g., gold-coated silicon) with spacers (not shown in schematic). Small apertures (uncoated areas of the capping layer) are aligned on top of the MRR and the input/output ports of the probe. The probe signal is collected by a near-IR camera.
Figure 17 Schematic of a possible free-space measurement configuration. The probe and pump sources flood-illuminate the chip from a certain distance, e.g., 30 cm. The SOI-chip is capped with a reflective or absorbing second layer (e.g., gold-coated silicon) with spacers (not shown in schematic). Small apertures (uncoated areas of the capping layer) are aligned on top of the MRR and the input/output ports of the probe. The probe signal is collected by a near-IR camera.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 83 references

Research works printed but not linked: 2

  1. Vivien, L., and Pavesi, L. (2013). Handbook of Silicon Photonics, Taylor & Francis.
  2. Workman, J. (2000). The Handbook of Organic Compounds, Three-Volume Set: NIR, IR, R, and UV-Vis Spectra Featuring Polymers and Surfactants, Elsevier. Part III, p. 24.

Cited by

See all 98

Metadata

Authors
Wang, R., Vasiliev, A., Muneeb, M., Malik, A., Sprengel, S., Boehm, G., Amann, M.-C., Šimonytė, I., Vizbaras, A., Vizbaras, K., Baets, R., & Roelkens, G.
Affiliations
  • Ghent University (BE)
  • Technical University of Munich (DE)
  • Brolis Semiconductors UAB, Moletu pl. 73, Vilnius LT-14259, Lithuania
  • Photonics Research Group, Ghent University-imec, Technologiepark-Zwijnaarde 15, Ghent 9052, Belgium
Venue
Sensors
Publisher
MDPI AG
Published
2017-08-04
Volume
17
Issue
8
Pages
1788
ISSN
1424-8220 (ISSN-L)
OpenAlex
W2742301967
Cited by
97
References
79
Citations by year
2026: 8 · 2025: 12 · 2024: 12 · 2023: 8 · 2022: 11 · 2021: 8 · 2020: 11 · 2019: 10 · 2018: 16 · 2017: 1
FWCI
0.47
Type
journal article
Language
en
Open access
Locations
  • Sensors (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Ghent University Academic Bibliography (Ghent University) (submittedVersion, cc-by)
  • Ghent University Academic Bibliography (Ghent University) (submittedVersion, other-oa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Fonds Wetenschappelijk Onderzoek
  • Vlaamse regering
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Chemistry › Spectroscopy › Spectroscopy and Laser Applications
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Fiber Optic Sensors
Keywords
III-V on silicon, silicon photonics, mid-infrared spectroscopy, heterogeneous integration, 2.3 μm laser, photodetectors, external cavity laser, tunable lasers, photothermal spectroscopy, microring resonators, silicon-on-insulator, trace gas detection, biomolecule detection, optical sensors

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: III–V-on-Silicon Photonic Integrated Circuits for Spectroscopic Sensing in the 2–4 μm Wavelength Range. https://app.cochat.ai/papers/10.3390/s17081788
The paper
Wang, R., Vasiliev, A., Muneeb, M., Malik, A., Sprengel, S., Boehm, G., Amann, M.-C., Šimonytė, I., Vizbaras, A., Vizbaras, K., Baets, R., & Roelkens, G. (2017). III–V-on-Silicon Photonic Integrated Circuits for Spectroscopic Sensing in the 2–4 μm Wavelength Range. Sensors. https://doi.org/10.3390/s17081788

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.