The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Novel Aerial Manipulator for Accurate and Robust Industrial NDT Contact Inspection: A New Tool for the Oil and Gas Inspection Industry
Open accessAbstract
There is a strong demand in the oil and gas industry to develop alternatives to manual inspection. This paper presents AeroX, a novel aerial robotic manipulator that provides physical contact inspection with unprecedented capabilities. AeroX has a semi-autonomous operation, which provides interesting advantages in contact inspection. In the free-flight mode, the pilot guides the robot until performing contact with its end-effector on the surface to be inspected. During contact, AeroX is in its fully-autonomous global navigation satellite system (GNSS)-free contact–flight mode, in which the robot keeps its relative position w.r.t. the surface contact point using only its internal sensors. During autonomous flight, the inspector can move—with uninterrupted contact—the end-effector on the surface for accurately selecting the points where to perform A-scan measurements or continuous B-scan or C-scan inspections. AeroX adopts an eight-tilted rotor configuration and a simple and efficient design, which provides high stability, maneuverability, and robustness to rotor failure. It can perform contact inspection on surfaces at any orientation, including vertical, inclined, horizontal-top or horizontal-bottom, and its operation can be easily integrated into current maintenance operations in many industries. It has been extensively validated in outdoor experiments including a refinery and has been awarded the EU Innovation Radar Prize 2017.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischler, M. A., & Bolles, R. C. (1981) · Communications of the ACM · doi:10.1145/358669.358692 · Cited by 25,893
Fundamental Actuation Properties of Multirotors: Force–Moment Decoupling and Fail–Safe Robustness
Michieletto, G., Ryll, M., & Franchi, A. (2018) · IEEE Transactions on Robotics · doi:10.1109/tro.2018.2821155 · Cited by 107 · cited 1×
“Furthermore, as demonstrated in [30], six tilted propellers are sufficient to be able to control the six DoF of the vehicle and ensure control of four DoF in case one motor fails.”
Background
Cited by
Past, Present, and Future of Aerial Robotic Manipulators
Ollero, A., Tognon, M., Suarez, A., Lee, D., & Franchi, A. (2022) · IEEE Transactions on Robotics · doi:10.1109/tro.2021.3084395 · Cited by 498
Self-citationIntrospective Perception for Long-Term Aerial Telemanipulation With Virtual Reality
Lee, J., Balachandran, R., Kondak, K., Coelho, A., Stefano, M. D., Humt, M., Feng, J., Asfour, T., & Triebel, R. (2024) · IEEE Transactions on Field Robotics · doi:10.55417/fr.2023010 · Cited by 8
“…manipulation applications range from load transportation (Bernard and Kondak, 2009), contact based inspection and maintenance in chemical plants (Trujillo et al., 2019), bridges (Sanchez-Cuevas et al., 2019), power-line maintenance (Cacace et al., 2021), to sensor installations in forests for…”
Metadata
- Authors
- Trujillo, M. Á., Martínez-de Dios, J. R., Martín, C., Viguria, A., & Ollero, A.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2019-03-15
- Volume
- 19
- Issue
- 6
- Pages
- 1305
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W2922320344
- Cited by
- 173
- References
- 2
- FWCI
- 10.47
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.