Reinforcement Learning-Enabled Cross-Layer Optimization for Low-Power and Lossy Networks under Heterogeneous Traffic Patterns
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The next generation of the Internet of Things (IoT) networks is expected to handle a massive scale of sensor deployment with radically heterogeneous traffic applications, which leads to a congested network, calling for new mechanisms to improve network efficiency. Existing protocols are based on simple heuristics mechanisms, whereas the probability of collision is still one of the significant challenges of future IoT networks. The medium access control layer of IEEE 802.15.4 uses a distributed coordination function to determine the efficiency of accessing wireless channels in IoT networks. Similarly, the network layer uses a ranking mechanism to route the packets. The objective of this study was to intelligently utilize the cooperation of multiple communication layers in an IoT network. Recently, Q-learning (QL), a machine learning algorithm, has emerged to solve learning problems in energy and computational-constrained sensor devices. Therefore, we present a QL-based intelligent collision probability inference algorithm to optimize the performance of sensor nodes by utilizing channel collision probability and network layer ranking states with the help of an accumulated reward function. The simulation results showed that the proposed scheme achieved a higher packet reception ratio, produces significantly lower control overheads, and consumed less energy compared to current state-of-the-art mechanisms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reinforcement Learning: An Introduction
Sutton, R. S., & Barto, A. G. (1998) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.1998.712192 · Cited by 27,225
Internet of Things in industries: A survey
Xu, L. D., He, W., & Li, S. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300753 · Cited by 5,172 · cited 1×
“Internet of Things-based systems have numerous applications such as smart cities [3], smart healthcare [4,5], smart industries [6], and smart grids [7].”
BackgroundMachine learning in wireless sensor networks: Algorithms, strategies, and applications
Alsheikh, M. A., Lin, S., Niyato, D., & Tan, H.-P. (2014) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2014.2320099 · Cited by 965
IoT Security Techniques Based on Machine Learning: How Do IoT Devices Use AI to Enhance Security?
Xiao, L., Wan, X., Lu, X., Zhang, Y., & Wu, D. (2018) · IEEE Signal Processing Magazine · doi:10.1109/msp.2018.2825478 · Cited by 681
Internet of Things Architecture: Recent Advances, Taxonomy, Requirements, and Open Challenges
Yaqoob, I., Ahmed, E., Hashem, I. A. T., Ahmed, A. I. A., Gani, A., Imran, M., & Guizani, M. (2017) · IEEE Wireless Communications · doi:10.1109/mwc.2017.1600421 · Cited by 668 · cited 1×
“The things in IoT refer to sensors, actuators, and microprocessor-based embedded devices [1].”
Background
Cited by
(1996) · Institutional Research Information System University of Turin (University of Turin) · doi:10.1111/j · Cited by 5,486
Learning-Based Resource Management for Low-Power and Lossy IoT Networks
Musaddiq, A., Ali, R., Kim, S. W., & Kim, D.-S. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3152929 · Cited by 23
Self-citation
Metadata
- Authors
- Musaddiq, A., Nain, Z., Ahmad Qadri, Y., Ali, R., & Kim, S. W.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2020-07-26
- Volume
- 20
- Issue
- 15
- Pages
- 4158
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W3043919840
- Cited by
- 216
- References
- 5
- FWCI
- 4.24
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.