The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
A Review of Indirect Tool Condition Monitoring Systems and Decision-Making Methods in Turning: Critical Analysis and Trends
Open accessAbstract
The complex structure of turning aggravates obtaining the desired results in terms of tool wear and surface roughness. The existence of high temperature and pressure make difficult to reach and observe the cutting area. In-direct tool condition, monitoring systems provide tracking the condition of cutting tool via several released or converted energy types, namely, heat, acoustic emission, vibration, cutting forces and motor current. Tool wear inevitably progresses during metal cutting and has a relationship with these energy types. Indirect tool condition monitoring systems use sensors situated around the cutting area to state the wear condition of the cutting tool without intervention to cutting zone. In this study, sensors mostly used in indirect tool condition monitoring systems and their correlations between tool wear are reviewed to summarize the literature survey in this field for the last two decades. The reviews about tool condition monitoring systems in turning are very limited, and relationship between measured variables such as tool wear and vibration require a detailed analysis. In this work, the main aim is to discuss the effect of sensorial data on tool wear by considering previous published papers. As a computer aided electronic and mechanical support system, tool condition monitoring paves the way for machining industry and the future and development of Industry 4.0.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Support Vector Machines and Other Kernel-based Learning Methods
Cristianini, N., & Shawe-Taylor, J. (2000) · doi:10.1017/cbo9780511801389 · Cited by 13,855
An Introduction to Support Vector Machines
Cristianini, N., & Shawe-Taylor, J. S. (2000) · ePrints Soton (University of Southampton) · Cited by 4,115
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997 · cited 1×
“Recent advice in the field of health manufac ‐ turing indicates the importance of these state ‐ of ‐ art techniques especially in fault diagnosis [167].”
BackgroundDeep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Literature review of Industry 4.0 and related technologies
Oztemel, E., & Gursev, S. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1433-8 · Cited by 2,143
Support vector machine in machine condition monitoring and fault diagnosis
Widodo, A., & Yang, B.-S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.007 · Cited by 1,650
Advanced monitoring of machining operations
Teti, R., Jemielniak, K., O’Donnell, G., & Dornfeld, D. (2010) · CIRP Annals · doi:10.1016/j.cirp.2010.05.010 · Cited by 1,354
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples
Thoben, K.-D., BIBA – Bremer Institut für Produktion und Logistik GmbH, T. U. O. B., Wiesner, S., Wuest, T., Faculty of Production Engineering, U. O. B., & Industrial and Management Systems Engineering (2017) · International Journal of Automation Technology · doi:10.20965/ijat.2017.p0004 · Cited by 1,133
Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks
Zhao, R., Yan, R., Wang, J., & Mao, K. (2017) · Sensors · doi:10.3390/s17020273 · Cited by 741
Sensor signals for tool-wear monitoring in metal cutting operations—a review of methods
Dimla, D. E. (2000) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(99)00122-4 · Cited by 696
SICK, B. (2002) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1460 · Cited by 439
Wavelet analysis of sensor signals for tool condition monitoring: A review and some new results
Zhu, K., Wong, Y. S., & Hong, G. S. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.02.003 · Cited by 406
On-line metal cutting tool condition monitoring.
Dimla, E., & Lister, P. M. (2000) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(99)00084-x · Cited by 394
Learning and Extracting Finite State Automata with Second-Order Recurrent Neural Networks
Giles, C. L., Miller, C. B., Chen, D., Chen, H. H., Sun, G. Z., & Lee, Y. C. (1992) · Neural Computation · doi:10.1162/neco.1992.4.3.393 · Cited by 392
State-of-the-art methods and results in tool condition monitoring: a review
Rehorn, A. G., Jiang, J., & Orban, P. E. (2004) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-004-2038-2 · Cited by 372
Review of tool condition monitoring in machining and opportunities for deep learning
Serin, G., Sener, B., Ozbayoglu, A. M., & Unver, H. O. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05449-w · Cited by 360
A review of flank wear prediction methods for tool condition monitoring in a turning process
Siddhpura, A., & Paurobally, R. M. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4177-1 · Cited by 330
Erratum to: State-of-the-art methods and results in tool condition monitoring: a review
Rehorn, A. G., Jiang, J., Orban, P. E., & Bordatchev, E. V. (2004) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-004-2443-6 · Cited by 289
Neural Network Sensor Fusion for Tool Condition Monitoring
Dornfeld, D. A., & DeVries, M. F. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61012-9 · Cited by 250
Sayuti, M., Sarhan, A. A. D., & Salem, F. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.12.052 · Cited by 248
Sensor Integration Using Neural Networks for Intelligent Tool Condition Monitoring
Rangwala, S., & Dornfeld, D. (1990) · Journal of Engineering for Industry · doi:10.1115/1.2899578 · Cited by 245
Exponential Disruptive Technologies and the Required Skills of Industry 4.0
Bongomin, O., Gilibrays Ocen, G., Oyondi Nganyi, E., Musinguzi, A., & Omara, T. (2020) · Journal of Engineering · doi:10.1155/2020/4280156 · Cited by 238
Mia, M., Dey, P. R., Hossain, M. S., Arafat, M. T., Asaduzzaman, M., Ullah, M. S., & Zobaer, T. (2018) · Measurement · doi:10.1016/j.measurement.2018.02.016 · Cited by 218
Predicting tool life in turning operations using neural networks and image processing
Mikołajczyk, T., Nowicki, K., Bustillo, A., & Yu Pimenov, D. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.022 · Cited by 206
Pimenov, D. Y., Bustillo, A., & Mikolajczyk, T. (2018) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-017-1381-8 · Cited by 206
Self-citationAnalysis of the structure of vibration signals for tool wear detection
Sánchez, F. J. A., & Salgado, D. R. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.09.012 · Cited by 204
Investigation of progressive tool wear for determining of optimized machining parameters in turning
Kuntoğlu, M., & Sağlam, H. (2019) · Measurement · doi:10.1016/j.measurement.2019.04.022 · Cited by 200
Self-citationAzouzi, R., & Guillot, M. (1997) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00013-8 · Cited by 195
Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning
Kuntoğlu, M., & Sağlam, H. (2021) · Measurement · doi:10.1016/j.measurement.2020.108582 · Cited by 195
Self-citationTool Condition Monitoring System: A Review
Ambhore, N., Kamble, D., Chinchanikar, S. S., & Wayal, V. (2015) · Materials Today Proceedings · doi:10.1016/j.matpr.2015.07.317 · Cited by 189
On-line tool wear monitoring using geometric descriptors from digital images
Castejón, M., Alegre, E., Barreiro, J., & Hernández, L. K. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.04.001 · Cited by 170
Davim, J. P., & Baptista, A. P. M. (2000) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00495-7 · Cited by 168
Hidden Markov Model-based Tool Wear Monitoring in Turning
Wang, L., Mehrabi, M. G., & Kannatey-Asibu (2002) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1475320 · Cited by 165
Development of a tool wear-monitoring system for hard turning
Scheffer, C., Kratz, H., Heyns, P. S., & Klocke, F. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(03)00110-x · Cited by 161
Samanta, S., & Chakraborty, S. (2011) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2011.03.009 · Cited by 148
Relevance vector machine for tool wear prediction
Kong, D., Chen, Y., Li, N., Duan, C., Lu, L., & Chen, D. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.03.023 · Cited by 142
Reliable tool wear monitoring by optimized image and illumination control in machine vision
Pfeifer, T., & Wiegers, L. (2000) · Measurement · doi:10.1016/s0263-2241(00)00014-2 · Cited by 138
Xu, L., Huang, C., Li, C., Wang, J., Liu, H., & Wang, X. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01559-0 · Cited by 126
Balaji, M., Rao, K. V., Rao, N. M., et al. (2017) · Measurement · doi:10.1016/j.measurement.2017.09.051 · Cited by 121
Multiclassification of tool wear with support vector machine by manufacturing loss consideration
Sun, J., Rahman, M., Wong, Y. S., & Hong, G. S. (2004) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2004.04.003 · Cited by 117
Tool wear monitoring using naïve Bayes classifiers
Karandikar, J. M., McLeay, T., Turner, S., et al. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6560-6 · Cited by 113
Assessment and visualisation of machine tool wear using computer vision
Kerr, D., Pengilley, J., & Garwood, R. (2005) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-004-2420-0 · Cited by 111
Zhao, J., & Liu, Z. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.06.010 · Cited by 108
Rizal, M., Ghani, J. A., Nuawi, M. Z., & Haron, C. H. C. (2012) · Applied Soft Computing · doi:10.1016/j.asoc.2012.11.043 · Cited by 106
Neural network approach for automatic image analysis of cutting edge wear
Mikołajczyk, T., Nowicki, K., Kłodowski, A., et al. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.11.026 · Cited by 105
Azmi, A. I. (2015) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2014.12.010 · Cited by 98
Kuo, R. J., & Cohen, P. H. (1999) · Neural Networks · doi:10.1016/s0893-6080(98)00137-3 · Cited by 97
Bustillo, A., Pimenov, D. Y., Mia, M., & Kapłonek, W. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01645-3 · Cited by 97
Self-citationMaia, L. H. A., Abrão, A. M., Vasconcelos, W. L., Sales, W. F., & Machado, Á. R. (2015) · Tribology International · doi:10.1016/j.triboint.2015.07.024 · Cited by 94
Liu, C., Li, Y., Zhou, G., & Shen, W. (2016) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-016-1209-y · Cited by 85
The Application of an ANFIS and Grey System Method in Turning Tool-Failure Detection
Lo, S.-P. (2002) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700200061 · Cited by 83
Wang, C., Bao, Z., Zhang, P., Ming, W., & Chen, M. (2019) · Measurement · doi:10.1016/j.measurement.2019.02.004 · Cited by 83
An investigation of cutting forces and tool wear in turning of Haynes 282
Suárez, A., Veiga, F., de Lacalle, L. N. L., Polvorosa, R., & Wretland, A. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.12.025 · Cited by 71
Detection of tool breakage during hard turning through acoustic emission at low removal rates
Neslušan, M., Mičieta, B., Mičietová, A., Čilliková, M., & Mrkvica, I. (2015) · Measurement · doi:10.1016/j.measurement.2015.03.035 · Cited by 61
Bhuiyan, M. S. H., Choudhury, I. A., & Nukman, Y. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.02.001 · Cited by 61
Valera, H. Y., & Bhavsar, S. N. (2014) · Procedia Technology · doi:10.1016/j.protcy.2014.08.067 · Cited by 59
Wang, C., Ming, W., & Chen, M. (2016) · Tribology International · doi:10.1016/j.triboint.2016.08.036 · Cited by 58
Dureja, J. S., Gupta, V. K., Sharma, V. S., Dogra, M., & Bhatti, M. S. S. (2014) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405414558731 · Cited by 55
Shao, H., Shi, X., & Li, L. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2011.05.006 · Cited by 54
ANN tool wear modelling in the machining of nickel superalloy industrial products
D'Addona, D. M., Segreto, T., Simeone, A., et al. (2011) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2011.07.003 · Cited by 53
Online monitoring and measurements of tool wear for precision turning of stainless steel parts
Liu, T.-I., Song, S.-D., Liu, G., & Wu, Z. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4265-2 · Cited by 46
Vibration-based estimation of tool major flank wear in a turning process using ARMA models
Aghdam, B. H., Vahdati, M., & Sadeghi, M. H. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6296-3 · Cited by 44
Scheffer, C., Engelbrecht, H. A., & Heyns, P. S. (2005) · Neural Computing and Applications · doi:10.1007/s00521-005-0469-9 · Cited by 40
An economic and reliable tool life estimation procedure for turning
Ojha, D. K., & Dixit, U. S. (2005) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-003-2049-4 · Cited by 40
A tool breakage monitoring method for end milling based on the indirect electric data of CNC system
Xu, G., Chen, J., & Zhou, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2735-x · Cited by 31
Xiao, Z., Liao, X., Long, Z., & Li, M. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8933-5 · Cited by 27
Panda, A., Sahoo, A. K., Rout, A. K., Kumar, R., & Das, R. K. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.02.053 · Cited by 20
Reñones, A., Rodríguez, J., & Miguel, L. J. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2119-3 · Cited by 19
Statistical analysis of surface roughness in turning process
Akkuş, H., Yaka, H., & Uğur, L. (2017) · Pamukkale University Journal of Engineering Sciences · doi:10.5505/pajes.2016.01212 · Cited by 4
Cited by
Pimenov, D. Y., Bustillo, A., Wojciechowski, S., Sharma, V. S., Gupta, M. K., & Kuntoğlu, M. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-01923-2 · Cited by 369
Self-citationGawde, S., Patil, S., Kumar, S., Kamat, P., Kotecha, K., & Abraham, A. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106139 · Cited by 306
Giordano, M., Baumann, N., Crabolu, M., Fischer, R., Bellusci, G., & Magno, M. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3165816 · Cited by 72
Metadata
- Authors
- Kuntoğlu, M., Aslan, A., Pimenov, D. Y., Usca, Ü. A., Salur, E., Gupta, M. K., Mikolajczyk, T., Giasin, K., Kapłonek, W., & Sharma, S.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2020-12-26
- Volume
- 21
- Issue
- 1
- Pages
- 108
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W3114814413
- Cited by
- 297
- References
- 69
- FWCI
- 20.32
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.