Application of C-LSTM Networks to Automatic Labeling of Vehicle Dynamic Response Data for Bridges
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Maintaining bridges that support road infrastructure is critical to the economy and human life. Structural health monitoring of bridges using vibration includes direct monitoring and drive-by monitoring. Drive-by monitoring uses a vehicle equipped with accelerometers to drive over bridges and estimates the bridge’s health from the vehicle vibration obtained. In this study, we attempt to identify the driving segments on bridges in the vehicle vibration data for the practical application of drive-by monitoring. We developed an in-vehicle sensor system that can measure three-dimensional behavior, and we propose a new problem of identifying the driving segment of vehicle vibration on a bridge from data measured in a field experiment. The “on a bridge” label was assigned based on the peaks in the vehicle vibration when running at joints. A supervised binary classification model using C-LSTM (Convolution—Long-Term Short Memory) networks was constructed and applied to data measured, and the model was successfully constructed with high accuracy. The challenge is to build a model that can be applied to bridges where joints do not exist. Therefore, future work is needed to propose a running label on bridges based on bridge vibration and extend the model to a multi-class model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The problem of data temporal and spatial feature extraction can be solved using a combination of the CNN and RNN methods, such as CNN with GRU [64,109,123], CNN with LSTM [27,178,179,180,181,182], CNN with Auto-encoder and [183], CNN with echo state networks [113], etc.”
From Deep Learning for Structural Health Monitoring: Data, Algorithms, Applications, Challenges, and Trends (2023) · cites this paper as [180]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hochreiter, S., & Schmidhuber, J. (1997) · Neural Computation · doi:10.1162/neco.1997.9.8.1735 · Cited by 102,318 · cited 1×
“In addition, for the gradient exploding or vanishing problem caused by general RNNs, a LSTM unit can be introduced to analyze the data, including past information (Hochreiter and Schmidhuber [20]).”
MethodLong-term recurrent convolutional networks for visual recognition and description
Donahue, J., Hendricks, L. A., Guadarrama, S., Rohrbach, M., Venugopalan, S., Darrell, T., & Saenko, K. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298878 · Cited by 5,228 · cited 3×
“Neural networks are used in various fields, most notably in speech recognition and natural language processing, where they have shown excellent performance (Donahue et al., 2015 [18]).”
MethodLong-Term Recurrent Convolutional Networks for Visual Recognition and Description
Donahue, J., Hendricks, L. A., Rohrbach, M., Venugopalan, S., Guadarrama, S., Saenko, K., & Darrell, T. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2599174 · Cited by 1,547
Predicting residential energy consumption using CNN-LSTM neural networks
Kim, T.-Y., & Cho, S.-B. (2019) · Energy · doi:10.1016/j.energy.2019.05.230 · Cited by 1,469 · cited 3×
“In this study, the C-LSTM model examined by Kim and Cho (2018) [21] and Kim and Cho (2019) [22] is used as a reference, and it is composed of convolution, activation, pooling, LSTM, and dense layer.”
BackgroundMethodExtracting bridge frequencies from the dynamic response of a passing vehicle
Yang, Y.-B., Lin, C. W., & Yau, J. D. (2004) · Journal of Sound and Vibration · doi:10.1016/s0022-460x(03)00378-x · Cited by 767
Use of a passing vehicle to scan the fundamental bridge frequencies: An experimental verification
Lin, C. W., & Yang, Y. B. (2005) · Engineering Structures · doi:10.1016/j.engstruct.2005.06.016 · Cited by 426 · cited 1×
“For example, Lin and Yang (2005) [2] experimentally extracted the bridge’s natural frequency from the Fourier’s power spectrum of the measured vehicle vibration.”
BackgroundWeb traffic anomaly detection using C-LSTM neural networks
Kim, T.-Y., & Cho, S.-B. (2018) · Expert Systems with Applications · doi:10.1016/j.eswa.2018.04.004 · Cited by 340 · cited 3×
“In this study, the C-LSTM model examined by Kim and Cho (2018) [21] and Kim and Cho (2019) [22] is used as a reference, and it is composed of convolution, activation, pooling, LSTM, and dense layer.”
BackgroundMethodA review of indirect bridge monitoring using passing vehicles
Malekjafarian, A., McGetrick, P. J., & OBrien, E. J. (2015) · Shock and Vibration · doi:10.1155/2015/286139 · Cited by 250 · cited 1×
“In addition, multiple runs are a promising approach for drive-by monitoring to overcome the problems of road surface irregularities, environmental effects, and limited measurement time [14].”
BackgroundYang, Y. B., & Chang, K. C. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.11.028 · Cited by 239 · cited 2×
“Sensors 2022, 22, 3486. https://doi.org/10.3390/s22093486 https://www.mdpi.com/journal/sensors Sensors 2022, 22, 3486 2 of 12 Yang and Chang (2009) [3,4] tried to estimate the bridge’s natural frequencies accurately for considering its application to bridge damage detection.”
BackgroundInfluentialExtracting the bridge frequencies indirectly from a passing vehicle: Parametric study
Yang, Y. B., & Chang, K. C. (2009) · Engineering Structures · doi:10.1016/j.engstruct.2009.06.001 · Cited by 182 · cited 2×
“Sensors 2022, 22, 3486. https://doi.org/10.3390/s22093486 https://www.mdpi.com/journal/sensors Sensors 2022, 22, 3486 2 of 12 Yang and Chang (2009) [3,4] tried to estimate the bridge’s natural frequencies accurately for considering its application to bridge damage detection.”
BackgroundInfluentialNguyen, K. V., & Tran, H. T. (2010) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2010.05.005 · Cited by 151 · cited 1×
“(2010) [6] also showed a similar result by applying wavelet transform.”
ResultA Machine Learning Approach to Bridge-Damage Detection Using Responses Measured on a Passing Vehicle
Malekjafarian, A., Golpayegani, F., Moloney, C., & Clarke, S. (2019) · Sensors · doi:10.3390/s19184035 · Cited by 149 · cited 2×
“(2019, 2020) [9,10] used artificial neural networks and Gaussian processes to analyze the relationship between these factors and vehicle response analysis.”
MethodMeasuring bridge frequencies by a test vehicle in non-moving and moving states
Yang, Y. B., Xu, H., Zhang, B., Xiong, F., & Wang, Z. L. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109859 · Cited by 137 · cited 3×
“In recent years, it has been applied to direct bridge damage detection (Yang et al., 2020 [23], Yang et al., 2021 [24]), and we thought that it would be possible to create a model that discriminates only the portion of the vehicle acceleration data traveling on the bridge by using C-LSTM.”
BackgroundMethodLocke, W. R., Sybrandt, J., Redmond, L., Safro, I., & Atamturktur, S. (2019) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2019.115088 · Cited by 133
Yang, J., Zhang, L., Chen, C., Li, Y., Li, R., Wang, G., Jiang, S., & Zeng, Z. (2020) · Information Sciences · doi:10.1016/j.ins.2020.05.090 · Cited by 123
Damage assessment of a bridge based on mode shapes estimated by responses of passing vehicles
Oshima, Y., Yamamoto, K., & Sugiura, K. (2014) · Smart Structures and Systems · doi:10.12989/sss.2014.13.5.731 · Cited by 119 · cited 3×
“(2014) [7] proposed a method to estimate the bridge’s mode shape from vehicle vibrations.”
BackgroundMethodSelf-citationYang, J., Yang, F., Zhou, Y., Wang, D., Li, R., Wang, G., & Chen, W. (2021) · Information Sciences · doi:10.1016/j.ins.2021.02.064 · Cited by 100 · cited 2×
“In recent years, it has been applied to direct bridge damage detection (Yang et al., 2020 [23], Yang et al., 2021 [24]), and we thought that it would be possible to create a model that discriminates only the portion of the vehicle acceleration data traveling on the bridge by using C-LSTM.”
BackgroundMethodDeep autoencoder architecture for bridge damage assessment using responses from several vehicles
Sarwar, M. Z., & Cantero, D. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.113064 · Cited by 98 · cited 1×
“Sarwar and Cantero (2021) [13] suggested a method to estimate the location and extent of bridge damage using deep autoencoders from vehicle vibration.”
Wang, H., Nagayama, T., Nakasuka, J., Zhao, B., & Su, D. (2018) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2018.04.030 · Cited by 96 · cited 2×
“Methods to extract only the bridge vibration component have been proposed by Wang et al. (2018) [15] and Murai et al. (2019) [16].”
MethodYang, Y., Lu, H., Tan, X., Chai, H. K., Wang, R., & Zhang, Y. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108746 · Cited by 86 · cited 2×
“Yang et al. (2022) [27] proposed a comprehensive indirect method for estimating girder bridges’ fundamental mode dynamic properties with two identical trailer-mounted passing tractors and evaluating the element stiffness.”
MethodWang, H., Nagayama, T., & Su, D. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.01.017 · Cited by 69 · cited 2×
“(2019) [25] proposed estimating tire ground forces with relatively high accuracy even at vehicle speeds of about 30 km/h using a Kalman filter based on vehicle vibrations measured with an iPod installed on the vehicle.”
MethodThe tap-scan method for damage detection of bridge structures
Xiang, Z., Dai, X., Zhang, Y., & Lu, Q. (2010) · Interaction and multiscale mechanics · doi:10.12989/imm.2010.3.2.173 · Cited by 29
Zadehmohamad, M., Bazaz, J. B., Riahipour, R., & Farhangi, V. (2021) · International Journal of Geo-Engineering · doi:10.1186/s40703-021-00163-2 · Cited by 24 · cited 2×
“To mitigate this, Zadehmohamad et al., 2021 [29], considered a backfill mixture of tire material and soil, which is being developed with high interest.”
BackgroundExperimental Evaluation of Drive-by Health Monitoring on a Short-Span Bridge Using OMA Techniques
Locke, W. R., Redmond, L., & Schmid, M. (2021) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-3-030-77143-0_12 · Cited by 9 · cited 2×
“(2022) [28] compared the system identification capabilities of different OMA (Operational Modal Analysis) techniques on bridges less than 18.”
BackgroundInfluentialTakahashi, Y., & Yamamoto, K. (2019) · International Journal of Lifecycle Performance Engineering · doi:10.1504/ijlcpe.2019.103699 · Cited by 5 · cited 2×
“Although many papers explicitly state that they measure vehicle vibration, many also assume the use of vehicle position in their signal processing [7,8].”
BackgroundMethodSelf-citationDrive-by Bridge Health Monitoring Using Multiple Passes and Machine Learning
Malekjafarian, A., Moloney, C., & Golpayegani, F. (2021) · Lecture notes in civil engineering · doi:10.1007/978-3-030-64594-6_67 · Cited by 5 · cited 2×
“(2019, 2020) [9,10] used artificial neural networks and Gaussian processes to analyze the relationship between these factors and vehicle response analysis.”
MethodDrive-By Detection of Midspan Cracking and Changing Boundary Conditions in Bridges
Corbally, R., & Malekjafarian, A. (2022) · Lecture notes in civil engineering · doi:10.1007/978-3-030-93236-7_50 · Cited by 3
Research works printed but not linked: 3
- Murai, R., Miyamoto, R., Yamamoto, K., and Okada, Y. (2019, January 3–5). Numerical Experiments of Bridge Position Estimation for On-Going Monitoring. Proceedings of the World Congress on Engineering 2019, London, UK.
- Shin, R., Okada, Y., and Yamamoto, K. (2021, January 7–9). Field Experiments and Predicting using C-LSTM Networks of Bridge Position Estimation. Proceedings of the World Congress on Engineering 2021, Online.
- Zhou, C., Sun, C., Liu, Z., and Lau, F. (2015). A C-LSTM neural network for text classification. arXiv.
Cited by
Jia, J., & Li, Y. (2023) · Sensors · doi:10.3390/s23218824 · Cited by 182
Malekjafarian, A., Corbally, R., & Gong, W. (2022) · Structures · doi:10.1016/j.istruc.2022.08.075 · Cited by 181
Operational Modal Analysis on Bridges: A Comprehensive Review
Hasani, H., & Freddi, F. (2023) · Infrastructures · doi:10.3390/infrastructures8120172 · Cited by 68
Multidamage Detection of Breathing Cracks in Plate‐Like Bridges: Experimental and Numerical Study
Wang, C., Gao, K., Yang, Z., Liu, J., & Wu, G. (2024) · Structural Control and Health Monitoring · doi:10.1155/2024/8840611 · Cited by 10
Discussion on a Vehicle–Bridge Interaction System Identification in a Field Test
Shin, R., Okada, Y., & Yamamoto, K. (2023) · Sensors · doi:10.3390/s23010539 · Cited by 7
“The instrumentation and testing details are presented in [48].”
BackgroundMethodSelf-citation
Metadata
- Authors
- Shin, R., Okada, Y., & Yamamoto, K.
- Affiliations
- University of Tsukuba (JP)
- Corresponding author
- Yamamoto, Kyosuke
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2022-05-03
- Volume
- 22
- Issue
- 9
- Pages
- 3486
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC9102347
- OpenAlex
- W4225423390
- Cited by
- 8
- References
- 26
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 1 · 2023: 4 · 2022: 1
- FWCI
- 0.79
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- JSPS KAKENHI (JP19H02220, JP22J10994)
- Shoreki Commemorative Foundation (JP19H02220, JP22J10994)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Physical Sciences › Engineering › Civil and Structural Engineering › Transport Systems and Technology
- Keywords
- bridge health monitoring, drive-by monitoring, vehicle vibration, bridge joints, convolutional LSTM, bridge maintenance
- MeSH terms
- Automobile Driving, Humans, Vibration, Memory, Long-Term
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.