The DOI matches its Crossref record; 175 of the 175 references it cites were found in a registry or an index.
A Review of Chemicals to Produce Activated Carbon from Agricultural Waste Biomass
Open accessAbstract
The choice of activating agent for the thermochemical production of high-grade activated carbon (AC) from agricultural residues and wastes, such as feedstock, requires innovative methods. Overcoming energy losses, and using the best techniques to minimise secondary contamination and improve adsorptivity, are critical. Here, we review the importance and influence of activating agents on agricultural waste: how they react and compare conventional and microwave processes. In particular, adsorbent pore characteristics, surface chemistry interactions and production modes were compared with traditional methods. It was concluded that there are no best activating agents; rather, each agent reacts uniquely with a precursor, and the optimum choice depends on the target adsorbent. Natural chemicals can also be as effective as inorganic activating agents, and offer the advantages that they are usually safe, and readily available. The use of a microwave, as an innovative pyrolysis approach, can enhance the activation process within a duration of 1–4 h and temperature of 500–1200 °C, after which the yield and efficiency decline rapidly due to molecular breakdown. This study also examines the biomass milling process requirements; the influence of the dielectric properties, along with the effect of washing; and experimental setup challenges. The microwave setup system, biomass feed rate, product delivery, inert gas flow rate, reactor design and recovery lines are all important factors in the microwave activation process, and contribute to the overall efficiency of AC preparation. However, a major issue is a lack of large-scale industrial demonstration units for microwave technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Khedr, S. A., Shouman, M. A. H., Fathy, N. A., & Attia, A. A. M. (2014) · International Scholarly Research Notices · doi:10.1155/2014/705069 · Cited by 25
RetractedInterpretation of Infrared Spectra, A Practical Approach
Coates, J. (2000) · Encyclopedia of Analytical Chemistry · doi:10.1002/9780470027318.a5606 · Cited by 4,411
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957 · cited 1×
“Isotherm [171] Nonlinear form [171] Linear”
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Bansal, R. C., & Goyal, M. (2005) · CRC Press eBooks · doi:10.1201/9781420028812 · Cited by 1,865
A comprehensive review on the applications of coal fly ash
Yao, Z. T., Ji, X. S., Sarker, P. K., Tang, J. H., Ge, L. Q., Xia, M. S., & Xi, Y. Q. (2015) · Earth-Science Reviews · doi:10.1016/j.earscirev.2014.11.016 · Cited by 1,737
Microwave processing: fundamentals and applications
Thostenson, E. T., & Chou, T.-W. (1999) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(99)00020-2 · Cited by 1,537
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
Oghbaei, M., & Mirzaee, O. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.01.068 · Cited by 1,270
An overview of the modification methods of activated carbon for its water treatment applications
Bhatnagar, A., Hogland, W., Marques, M., & Sillanpää, M. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.12.038 · Cited by 1,212
Recent Advancement of Coagulation–Flocculation and Its Application in Wastewater Treatment
Teh, C. Y., Budiman, P. M., Shak, K. P. Y., & Wu, T. Y. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04703 · Cited by 1,160 · cited 1×
“AC is used widely in various applications beyond adsorption to treat various industrial effluents. particular [5].”
Cited by
Biomass pyrolysis: A review on recent advancements and green hydrogen production
Vuppaladadiyam, A. K., Vuppaladadiyam, S. S. V., Awasthi, A., Sahoo, A., Rehman, S., Pant, K. K., Murugavelh, S., Huang, Q., Anthony, E., Fennel, P., et al. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.128087 · Cited by 382
Self-citationEffect of hexavalent chromium on the environment and removal techniques: A review
Ukhurebor, K. E., Aigbe, U. O., Onyancha, R. B., Nwankwo, W., Osibote, O. A., Paumo, H. K., Ama, O. M., Adetunji, C. O., & Siloko, I. U. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.111809 · Cited by 377
Reza, M. S., Yun, C. S., Afroze, S., Radenahmad, N., Bakar, M. S. A., Saidur, R., Taweekun, J., & Azad, A. K. (2020) · Arab Journal of Basic and Applied Sciences · doi:10.1080/25765299.2020.1766799 · Cited by 374
Gayathiri, M., Pulingam, T., Lee, K. T., & Sudesh, K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.133764 · Cited by 356
Tee, G. T., Gok, X. Y., & Yong, W. F. (2022) · Environmental Research · doi:10.1016/j.envres.2022.113248 · Cited by 346
Amusat, S. O., Kebede, T. G., Dube, S., & Nindi, M. M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.101993 · Cited by 323
Activated carbon from biomass precursors using phosphoric acid: A review
Neme, I., Gonfa, G., & Masi, C. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e11940 · Cited by 311
Mane, P. V., Rego, R. M., Yap, P. L., Losic, D., & Kurkuri, M. D. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101314 · Cited by 271
Amalina, F., Syukor Abd Razak, A., Krishnan, S., Sulaiman, H., Zularisam, A. W., & Nasrullah, M. (2022) · Cleaner Materials · doi:10.1016/j.clema.2022.100137 · Cited by 166
Metadata
- Authors
- Ukanwa, K., Patchigolla, K., Sakrabani, R., Anthony, E., & Mandavgane, S.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-11-06
- Volume
- 11
- Issue
- 22
- Pages
- 6204
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2986042940
- Cited by
- 351
- References
- 175
- FWCI
- 12.02
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.