The DOI matches its Crossref record.
Design of Human-Centered Collaborative Assembly Workstations for the Improvement of Operators’ Physical Ergonomics and Production Efficiency: A Case Study
Open accessAbstract
Industrial collaborative robotics is one of the main enabling technologies of Industry 4.0. Collaborative robots are innovative cyber-physical systems, which allow safe and efficient physical interactions with operators by combining typical machine strengths with inimitable human skills. One of the main uses of collaborative robots will be the support of humans in the most physically stressful activities through a reduction of work-related biomechanical overload, especially in manual assembly activities. The improvement of operators’ occupational work conditions and the development of human-centered and ergonomic production systems is one of the key points of the ongoing fourth industrial revolution. The factory of the future should focus on the implementation of adaptable, reconfigurable, and sustainable production systems, which consider the human as their core and valuable part. Strengthening actual assembly workstations by integrating smart automation solutions for the enhancement of operators’ occupational health and safety will be one of the main goals of the near future. In this paper, the transformation of a manual workstation for wire harness assembly into a collaborative and human-centered one is presented. The purpose of the work is to present a case study research for the design of a collaborative workstation to improve the operators’ physical ergonomics while keeping or increasing the level of productivity. Results demonstrate that the achieved solution provides valuable benefits for the operators’ working conditions as well as for the production performance of the companies. In particular, the biomechanical overload of the worker has been reduced by 12.0% for the right part and by 28% for the left part in terms of manual handling, and by 50% for the left part and by 57% for the right part in terms of working postures. In addition, a reduction of the cycle time of 12.3% has been achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Outlook on human-centric manufacturing towards Industry 5.0
Lu, Y., Zheng, H., Chand, S., Xia, W., Liu, Z., Xu, X., Wang, L., Qin, Z., & Bao, J. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.02.001 · Cited by 671
Ching, N. T., Ghobakhloo, M., Iranmanesh, M., Maroufkhani, P., & Asadi, S. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.130133 · Cited by 320
Industry 4.0 and sustainability: Towards conceptualization and theory
Beltrami, M., Orzes, G., Sarkis, J., & Sartor, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127733 · Cited by 261
Suokko, T., Oksanen, T., & Reiman, A. (2025) · Applied Ergonomics · doi:10.1016/j.apergo.2024.104460 · Cited by 6
Ergonomic Risk Factors and Job Performance of Electronic Employee in Malaysia
Mohd Nizam, N. A. S., & Ramlee, S. N. S. (2024) · Malaysian Journal of Medicine and Health Sciences · doi:10.47836/mjmhs.20.1.15 · Cited by 4
“According to Gualtieri et al., ergonomics is divided into three broad groups that deal with the physical, cognitive, and organisational elements of human-system interaction (15).”
Method
Metadata
- Authors
- Gualtieri, L., Palomba, I., Merati, F. A., Rauch, E., & Vidoni, R.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2020-04-29
- Volume
- 12
- Issue
- 9
- Pages
- 3606
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3023950624
- Cited by
- 175
- References
- 0
- FWCI
- 24.85
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of Human-Centered Collaborative Assembly Workstations for the Improvement of Operators’ Physical Ergonomics and Production Efficiency: A Case Study. https://app.cochat.ai/papers/10.3390/su12093606
- The paper
- Gualtieri, L., Palomba, I., Merati, F. A., Rauch, E., & Vidoni, R. (2020). Design of Human-Centered Collaborative Assembly Workstations for the Improvement of Operators’ Physical Ergonomics and Production Efficiency: A Case Study. Sustainability. https://doi.org/10.3390/su12093606
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.