CoChat

A Novel Smart Energy Management as a Service over a Cloud Computing Platform for Nanogrid Appliances

Open access

The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.

Abstract

There will be a dearth of electrical energy in the world in the future due to exponential increase in electrical energy demand of rapidly growing world population. With the development of Internet of Things (IoT), more smart appliances will be integrated into homes in smart cities that actively participate in the electricity market by demand response programs to efficiently manage energy in order to meet this increasing energy demand. Thus, with this incitement, the energy management strategy using a price-based demand response program is developed for IoT-enabled residential buildings. We propose a new EMS for smart homes for IoT-enabled residential building smart devices by scheduling to minimize cost of electricity, alleviate peak-to-average ratio, correct power factor, automatic protective appliances, and maximize user comfort. In this method, every home appliance is interfaced with an IoT entity (a data acquisition module) with a specific IP address, which results in a wide wireless system of devices. There are two components of the proposed system: software and hardware. The hardware is composed of a base station unit (BSU) and many terminal units (TUs). The software comprises Wi-Fi network programming as well as system protocol. In this study, a message queue telemetry transportation (MQTT) broker was installed on the boards of BSU and TU. In this paper, we present a low-cost platform for the monitoring and helping decision making about different areas in a neighboring community for efficient management and maintenance, using information and communication technologies. The findings of the experiments demonstrated the feasibility and viability of the proposed method for energy management in various modes. The proposed method increases effective energy utilization, which in turn increases the sustainability of IoT-enabled homes in smart cities. The proposed strategy automatically responds to power factor correction, to protective home appliances, and to price-based demand response programs to combat the major problem of the demand response programs, which is the limitation of consumer’s knowledge to respond upon receiving demand response signals. The schedule controller proposed in this paper achieved an energy saving of 6.347 kWh real power per day, this paper achieved saving 7.282 kWh apparent power per day, and the proposed algorithm in our paper saved $2.3228388 per day.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/su12229686

Cites

57 of 57 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Structure of proposed nanogrid. Figure 1. Structure of proposed nanogrid.
Figure 1 Structure of proposed nanogrid. Figure 1. Structure of proposed nanogrid.CC-BY · From the PDF
Figure 2 Flowchart of methodology. Figure 2. Flowchart of methodology.
Figure 2 Flowchart of methodology. Figure 2. Flowchart of methodology.CC-BY · From the PDF
Figure 3 Proposed Internet of Energy platform architecture. Figure 3. Proposed Internet of Energy platform architecture.
Figure 3 Proposed Internet of Energy platform architecture. Figure 3. Proposed Internet of Energy platform architecture.CC-BY · From the PDF
Figure 4 An example for following the information between the web page and TU through BSU. Figure 4. An example for following the information between the web page and TU through BSU.
Figure 4 An example for following the information between the web page and TU through BSU. Figure 4. An example for following the information between the web page and TU through BSU.CC-BY · From the PDF
Figure 5 ( a ) Procedure of protocol MQTT, ( b ) topic and components of protocol MQTT. Figure 5. ( a ) Procedure of protocol MQTT, ( b ) topic and components of protocol MQTT.
Figure 5 ( a ) Procedure of protocol MQTT, ( b ) topic and components of protocol MQTT. Figure 5. ( a ) Procedure of protocol MQTT, ( b ) topic and components of protocol MQTT.CC-BY · From the PDF
Figure 6 Smart home proposed architecture of communication. Figure 6. Smart home proposed architecture of communication.
Figure 6 Smart home proposed architecture of communication. Figure 6. Smart home proposed architecture of communication.CC-BY · From the PDF
Figure 7 System BSU internal structure. Figure 7. System BSU internal structure. Figure 7. System BSU internal structure.
Figure 7 System BSU internal structure. Figure 7. System BSU internal structure. Figure 7. System BSU internal structure.CC-BY · From the PDF
Figure 8 The TU structure of the proposed system. Figure 8. The TU structure of the proposed system. Figure 8. The TU structure of the proposed system.
Figure 8 The TU structure of the proposed system. Figure 8. The TU structure of the proposed system. Figure 8. The TU structure of the proposed system.CC-BY · From the PDF
Figure 9 The triangle of power. Figure 9. The triangle of power.
Figure 9 The triangle of power. Figure 9. The triangle of power.CC-BY · From the PDF
Figure 10 The proposed APFC diagram. Figure 10. The proposed APFC diagram. Figure 10. The proposed APFC diagram.
Figure 10 The proposed APFC diagram. Figure 10. The proposed APFC diagram. Figure 10. The proposed APFC diagram.CC-BY · From the PDF
Figure 11 Cont.
Figure 11 Cont.CC-BY · From the PDF
Figure 11 ( a ) Step down voltage circuit diagram, ( b ) the input and output signal of the circuit Figure 11. ( a ) Step down voltage circuit diagram, ( b ) the input and output signal of the circuit diagram.
Figure 11 ( a ) Step down voltage circuit diagram, ( b ) the input and output signal of the circuit Figure 11. ( a ) Step down voltage circuit diagram, ( b ) the input and output signal of the circuit diagram.CC-BY · From the PDF
Figure 12 ( a ) Step down current circuit diagram, ( b ) current sensing circuit diagram. Figure 12. ( a ) Step down current circuit diagram, ( b ) current sensing circuit diagram.
Figure 12 ( a ) Step down current circuit diagram, ( b ) current sensing circuit diagram. Figure 12. ( a ) Step down current circuit diagram, ( b ) current sensing circuit diagram.CC-BY · From the PDF
Figure 13 Complete APFC and energy monitoring system. Figure 13. Complete APFC and energy monitoring system.
Figure 13 Complete APFC and energy monitoring system. Figure 13. Complete APFC and energy monitoring system.CC-BY · From the PDF
Figure 14 User interface design platform (Node-Red platform). Figure 14. User interface design platform (Node-Red platform).
Figure 14 User interface design platform (Node-Red platform). Figure 14. User interface design platform (Node-Red platform).CC-BY · From the PDF
Figure 15 Cont.
Figure 15 Cont.CC-BY · From the PDF
Figure 15 Diagram of the time limit for load priority controls, ( a ) BSU flowchart, ( b ) TU flowchart. Figure 15. Diagram of the time limit for load priority controls, ( a ) BSU flowchart, ( b ) TU flowchart.
Figure 15 Diagram of the time limit for load priority controls, ( a ) BSU flowchart, ( b ) TU flowchart. Figure 15. Diagram of the time limit for load priority controls, ( a ) BSU flowchart, ( b ) TU flowchart.CC-BY · From the PDF
Figure 16 Web site and prompt to enter username and password after entering the URL in the Figure 16. Web site and prompt to enter username and password after entering the URL in the browser.
Figure 16 Web site and prompt to enter username and password after entering the URL in the Figure 16. Web site and prompt to enter username and password after entering the URL in the browser.CC-BY · From the PDF
Image 19
CC-BY · From the PDF
Image 20
CC-BY · From the PDF
Image 21
CC-BY · From the PDF
Image 22
CC-BY · From the PDF
Image 23
CC-BY · From the PDF
Figure 17 Graphical user interface of proposed HEMS before implementing the proposed algorithm, ( a ) main page, ( b ) control panel, ( c ) real power consumption, ( d ) apparent power consumption, ( e ) current of home loads, ( f ) voltage of home load, ( g ) power factor of loads, and ( h ) the cost. Figure 17. Graphical user interface of proposed HEMS before implementing the proposed algorithm, ( a ) main page, ( b ) control panel, ( c ) real power consumption, ( d ) apparent power consumption, ( e ) current of home loads, ( f ) voltage of home load, ( g ) power factor of loads, and ( h ) the cost.
Figure 17 Graphical user interface of proposed HEMS before implementing the proposed algorithm, ( a ) main page, ( b ) control panel, ( c ) real power consumption, ( d ) apparent power consumption, ( e ) current of home loads, ( f ) voltage of home load, ( g ) power factor of loads, and ( h ) the cost. Figure 17. Graphical user interface of proposed HEMS before implementing the proposed algorithm, ( a ) main page, ( b ) control panel, ( c ) real power consumption, ( d ) apparent power consumption, ( e ) current of home loads, ( f ) voltage of home load, ( g ) power factor of loads, and ( h ) the cost.CC-BY · From the PDF
Image 25
CC-BY · From the PDF
Image 26
CC-BY · From the PDF
Image 27
CC-BY · From the PDF
Image 28
CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 57 references

Research works printed but not linked: 1

  1. Wang, P., Liu, S., Ye, F., and Chen, X. (2018). A Fog-based Architecture and Programming Model for IoT Applications in the Smart Grid. arXiv.

Cited by

See all 50

Metadata

Authors
Alhasnawi, B. N., Jasim, B. H., Esteban, M. D., & Guerrero, J. M.
Affiliations
  • University of Basrah (IQ)
  • Universidad Politécnica de Madrid (ES)
  • Aalborg University (DK)
Corresponding author
  • Alhasnawi, Bilal Naji
  • Esteban, Maria Dolores
Venue
Sustainability
Publisher
MDPI AG
Published
2020-11-20
Volume
12
Issue
22
Pages
9686
ISSN
2071-1050 (ISSN-L)
OpenAlex
W3098694861
Cited by
49
References
57
Citations by year
2026: 9 · 2025: 5 · 2024: 8 · 2023: 11 · 2022: 7 · 2021: 9
FWCI
2.32
Type
journal article
Language
en
Open access
Locations
  • Sustainability (publishedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • VBN Forskningsportal (Aalborg Universitet) (submittedVersion, cc-by)
Funders
Villum Fonden (25920)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Smart Grid Energy Management
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › IoT-based Smart Home Systems
  • Physical Sciences › Computer Science › Computer Networks and Communications › IoT and Edge/Fog Computing
Keywords
nanogrid, smart appliances, Internet of Things, demand response, price-based demand response, cloud computing, MQTT, peak-to-average power ratio, power factor correction, appliance scheduling, electricity cost reduction, smart cities, residential buildings

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Novel Smart Energy Management as a Service over a Cloud Computing Platform for Nanogrid Appliances. https://app.cochat.ai/papers/10.3390/su12229686
The paper
Alhasnawi, B. N., Jasim, B. H., Esteban, M. D., & Guerrero, J. M. (2020). A Novel Smart Energy Management as a Service over a Cloud Computing Platform for Nanogrid Appliances. Sustainability. https://doi.org/10.3390/su12229686

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.