A Lifecycle Assessment of Meat Processing Products Made from Protein-Based Thermoplastics
Open accessThe DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Hygiene during slaughtering is paramount for meat processors and plugs are often used during slaughtering to reduce contamination from fecal matter. These products are rendered along with other waste and are considered a serious contaminant to rendering products. A life cycle assessment (LCA) was used to determine and compare the environmental impacts of plugs made from polypropylene to a protein-based thermoplastic (Novatein). For Novatein plugs, resin production dominated the non-renewable primary energy (NRPE) use and global warming potential (GWP), whereas the impacts from injection molding and packaging dominated downstream production. Novatein plugs had a higher GWP than the PP plug, but required less NRPE. Two important conclusions were drawn: a bio-based material does not necessarily present an overall reduced environmental impact in comparison to other products, and results can easily be skewed based on allocation methods used for impacts from upstream processes, especially considering waste products. However, not evident from this LCA is the advantage that Novatein breaks down during rendering, safely becoming part of part of the rendering products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 ( a ): NRPE and ( b ): GWP for producing blood meal used in Novatein. Data extracted from [19].](https://figures.cochat.ai/paper-figures/a0e2278fc99945ceb105d3c60ba50b10/a-lifecycle-assessment-of-meat-processing-products-made-from-protein-based-figure-3.png)



Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“This enables the 'Internet of Everything' to be realized between things and things and people and things in the Energy Internet. This enables the remote high-speed regulation and control of the Energy Internet, which can identify, manage, and control each terminal of the network, thus ensuring its stable operation [68].”
From Reform of Electrical Engineering Undergraduate Teaching and the Curriculum System in the Context of the Energy Internet (2023) · cites this paper as [68]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
International Organization for Standardization
(2011) · SpringerReference · doi:10.1007/springerreference_16847 · Cited by 12,534
Single-use plastics: Production, usage, disposal, and adverse impacts
Chen, Y., Awasthi, A. K., Wei, F., Tan, Q., & Li, J. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141772 · Cited by 716
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Life cycle assessment of bio-based and fossil-based plastic: A review
Walker, S., & Rothman, R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121158 · Cited by 480
Bio-based and biodegradable polymers - State-of-the-art, challenges and emerging trends
RameshKumar, S., Shaiju, P., O'Connor, K. E., & P, R. B. (2020) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2019.12.005 · Cited by 479
HARDING, K., DENNIS, J., VONBLOTTNITZ, H., & HARRISON, S. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.02.012 · Cited by 461
Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers
Tabone, M. D., Cregg, J. J., Beckman, E. J., & Landis, A. E. (2010) · Environmental Science & Technology · doi:10.1021/es101640n · Cited by 416
Hazard identification in swine slaughter with respect to foodborne bacteria
Borch, E., Nesbakken, T., & Christensen, H. (1996) · International Journal of Food Microbiology · doi:10.1016/0168-1605(96)00988-9 · Cited by 293
Papong, S., Malakul, P., Trungkavashirakun, R., Wenunun, P., Chom-in, T., Nithitanakul, M., & Sarobol, E. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.09.030 · Cited by 250
Life cycle impact assessment of bio-based plastics from sugarcane ethanol
Tsiropoulos, I., Faaij, A. P. C., Lundquist, L., Schenker, U., Briois, J. F., & Patel, M. K. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.11.071 · Cited by 213
Cited by
High value utilization of biomass: Moving towards a carbon neutrality future
Peng, X., Fu, N., Lei, Y., Li, Z., Cao, M., Wang, J., Chen, Y., Qin, Y., Chang, Z., Li, H., et al. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116477 · Cited by 20
Zhao, X., & You, F. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142281 · Cited by 14
Regional food consumption in Italy, a life cycle analysis
Mattarello, G., Arfelli, F., Cespi, D., Passarini, F., & Vassura, I. (2024) · Environmental Research · doi:10.1016/j.envres.2024.119867 · Cited by 10
Zhang, D., Rong, C., Goh, H. H., Liu, H., Li, X., Zhu, H., & Wu, T. (2023) · Sustainability · doi:10.3390/su15065280 · Cited by 8
Li, Y., Zhao, K., Wang, C., Fu, H., & Hu, S. (2025) · Green Chemistry · doi:10.1039/d5gc01960e · Cited by 8
Metadata
- Authors
- Verbeek, C. J. R., Van der Merwe, D. W., & Bier, J. M.
- Affiliations
- University of Auckland (NZ)
- School of Engineering, University of Waikato, Hamilton 3240, New Zealand
- University of Waikato (NZ)
- Corresponding author
- Verbeek, Casparus J. R.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2023-02-14
- Volume
- 15
- Issue
- 4
- Pages
- 3455
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W4320729477
- Cited by
- 6
- References
- 17
- Citations by year
- 2025: 2 · 2024: 2 · 2023: 2
- FWCI
- 0.50
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Ecology › Agriculture Sustainability and Environmental Impact
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Keywords
- polypropylene, slaughterhouse hygiene, bio-based materials, environmental impact comparison, global warming potential, injection molding, packaging, allocation methods, waste products
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Lifecycle Assessment of Meat Processing Products Made from Protein-Based Thermoplastics. https://app.cochat.ai/papers/10.3390/su15043455
- The paper
- Verbeek, C. J. R., Van der Merwe, D. W., & Bier, J. M. (2023). A Lifecycle Assessment of Meat Processing Products Made from Protein-Based Thermoplastics. Sustainability. https://doi.org/10.3390/su15043455
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.