Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach
Open accessThe DOI matches its Crossref record.
Abstract
Timber building has gained more and more attention worldwide due to it being a generic renewable material and having low environmental impact. It is widely accepted that the use of timber may be able to reduce the embodied energy of a building. However, the development of timber buildings in China is not as rapid as in some other countries. This may be because of the limitations of building regulations and technological development. Several new policies have been or are being implemented in China in order to encourage the use of timber in building construction and this could lead to a revolutionary change in the building industry in China. This paper is the first one to examine the feasibility of using Cross Laminated Timber (CLT) as an alternative solution to concrete by means of a cradle-to-grave life-cycle assessment in China. A seven-storey reference concrete building in Xi’an was selected as a case study in comparison with a redesigned CLT building. Two cities in China, in cold and severe cold regions (Xi’an and Harbin), were selected for this research. The assessment includes three different stages of the life span of a building: materialisation, operation, and end-of-life. The inventory data used in the materialisation stage was mostly local, in order to ensure that the assessment appropriately reflects the situation in China. Energy consumption in the operation stage was obtained from simulation by commercialised software IESTM, and different scenarios for recycling of timber material in the end-of-life are discussed in this paper. The results from this paper show that using CLT to replace conventional carbon intensive material would reduce energy consumption by more than 30% and reduce CO2 emission by more than 40% in both cities. This paper supports, and has shown the potential of, CLT being used in cold regions with proper detailing to minimise environmental impact.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Emerging Engineered Wood for Building Applications
Ding, Y., Pang, Z., Lan, K., Yao, Y., Panzarasa, G., Xu, L., Lo Ricco, M., Rammer, D. R., Zhu, J. Y., Hu, M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00450 · Cited by 326
Cabeza, L. F., Boquera, L., Chàfer, M., & Vérez, D. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110612 · Cited by 175
Cross-laminated timber for building construction: a life-cycle-assessment overview
Younis, A., & Dodoo, A. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104482 · Cited by 175
D’Amico, B., Pomponi, F., & Hart, J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123487 · Cited by 141
Chen, C. X., Pierobon, F., & Ganguly, I. (2019) · Sustainability · doi:10.3390/su11051278 · Cited by 115
“[16] evaluates the carbon emission of CLT buildings in China and assumes the total transportation distance between facilities to be constant, but the variability associated with transportation is not considered.”
Background
Metadata
- Authors
- Liu, Y., Guo, H., Sun, C., & Chang, W.-S.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2016-10-18
- Volume
- 8
- Issue
- 10
- Pages
- 1047
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2534205766
- Cited by
- 128
- References
- 0
- FWCI
- 2.45
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach. https://app.cochat.ai/papers/10.3390/su8101047
- The paper
- Liu, Y., Guo, H., Sun, C., & Chang, W.-S. (2016). Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach. Sustainability. https://doi.org/10.3390/su8101047
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.