Modeling Groundwater Potential Zone in a Semi-Arid Region of Aseer Using Fuzzy-AHP and Geoinformation Techniques
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Saudi Arabia’s arid and semi-arid regions suffer from water scarcity because of climatic constraints and rapid growth of domestic and industrial water uses. The growing demand for high-quality water supplies and to reduce the dependency on desalination creates an urgent need to explore groundwater resources as an alternative. The weighted overlay analysis method using the fuzzy-analytical hierarchy process (FAHP) multi-criteria decision making (MCDM) techniques combined with geoinformation technology was used in this study to explore the groundwater potential zones in the Itwad-Khamis watershed of Saudi Arabia. Twelve thematic layers were prepared and processed in a GIS setting to produce the groundwater potential zone map (GPZM). Subsequently, potential groundwater areas were delineated and drawn into five classes: very good potential, good potential, moderate potential, poor potential, and very poor potential. The estimated GWPZ (groundwater potential zones) was validated by analyzing the existing open wells distribution and the yield data of selected wells within the studied watershed. With this quality-based zoning, it was found that 82% of existing wells were located in a very good and good potential area. The statistical analysis showed that 14.6% and 28.8% of the total area were under very good and good, while 27.3% and 20.2% were accounted for the moderate and poor potential zone, respectively. To achieve sustainable groundwater management in the Aseer region, Saudi Arabia, this research provided a primary estimate and significant insights for local water managers and authorities by providing groundwater potential zone map.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
BEVEN, K. J., & KIRKBY, M. J. (1979) · Hydrological Sciences Bulletin · doi:10.1080/02626667909491834 · Cited by 6,670 · cited 2×
“Equation (1) given below was used for the calculation of TWI [81].”
Method
Cited by
Mukherjee, I., & Singh, U. K. (2020) · CATENA · doi:10.1016/j.catena.2020.104681 · Cited by 282
Quantification of Urban Sprawl for Past-To-Future in Abha City, Saudi Arabia
AlQadhi, S., Mallick, J., Talukdar, S., Ali Bindajam, A., Ali A. Shohan, A., & Shahfahad (2021) · Computer Modeling in Engineering & Sciences · doi:10.32604/cmes.2021.016640 · Cited by 16
Self-citation
Metadata
- Authors
- Mallick, J., Khan, R. A., Ahmed, M., Alqadhi, S. D., Alsubih, M., Falqi, I., & Hasan, M. A.
- Venue
- Water
- Publisher
- MDPI AG
- Published
- 2019-12-16
- Volume
- 11
- Issue
- 12
- Pages
- 2656
- ISSN
- 2073-4441 (ISSN-L)
- OpenAlex
- W2996240864
- Cited by
- 228
- References
- 1
- FWCI
- 7.67
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.